Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2015, Article ID 471270, 12 pages
http://dx.doi.org/10.1155/2015/471270
Research Article

Dynamic Finite Element Analysis of Bending-Torsion Coupled Beams Subjected to Combined Axial Load and End Moment

Department of Aerospace Engineering, Ryerson University, Toronto, ON, Canada M5B 2K3

Received 31 March 2015; Accepted 27 May 2015

Academic Editor: Matteo Aureli

Copyright © 2015 Mir Tahmaseb Kashani et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Neogy and M. K. S. Murthy, “Determination of fundamental natural frequencies of axially loaded columns and rames,” Journal of the Institution of Engineers, vol. 49, pp. 203–212, 1969. View at Google Scholar
  2. A. A. V. Krishn, M. Krishn, and K. S. R. K. Prasad, “Iterative type Rayleigh-Ritz method for natural vibration,” American Institute of Aeronautics and Astronautics Journal, vol. 8, no. 10, pp. 1884–1886, 1970. View at Publisher · View at Google Scholar
  3. M. Gellert and J. Gluck, “The influence of axial load on eigen-frequencies of a vibrating lateral restraint cantilever,” International Journal of Mechanical Sciences, vol. 14, no. 11, pp. 723–728, 1972. View at Publisher · View at Google Scholar · View at Scopus
  4. D. Pilkington and J. Carr, “Vibration of beams subjected to end and axially distributed loading,” Journal of Mechanical Engineering Science, vol. 12, no. 1, pp. 70–72, 1970. View at Publisher · View at Google Scholar · View at Scopus
  5. J. T.-S. Wang, D. Shaw, and O. Mahrenholtz, “Vibration of rotating rectangular plates,” Journal of Sound and Vibration, vol. 112, no. 3, pp. 455–468, 1987. View at Publisher · View at Google Scholar · View at Scopus
  6. T. Tarnai, “Variational methods for analysis of lateral buckling of beams hung at both ends,” International Journal of Mechanical Sciences, vol. 21, no. 6, pp. 329–337, 1979. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  7. D. W. Jensen and E. F. Crawley, “Frequency determination techniques for cantilevered plates with bending-torsion coupling,” AIAA Journal, vol. 22, no. 3, pp. 415–420, 1984. View at Publisher · View at Google Scholar · View at Scopus
  8. M. E. Mohsin and E. A. Sadek, “The distributed mass-stiffness technique for the dynamical analysis of complex frameworks,” The Structural Engineer, vol. 46, no. 11, pp. 345–351, 1968. View at Google Scholar
  9. J. R. Banerjee and S. A. Fisher, “Coupled bending-torsional dynamic stiffness matrix for axially loaded beam elements,” International Journal for Numerical Methods in Engineering, vol. 33, no. 4, pp. 739–751, 1992. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  10. L. Jun, H. Hongxing, and S. Rongying, “Dynamic finite element method for generally laminated composite beams,” International Journal of Mechanical Sciences, vol. 50, no. 3, pp. 466–480, 2008. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  11. V. Kalousek, Dynamics in Engineering Structures, Butterworths, London, UK, 1973.
  12. W. L. Hallauer Jr. and R. Y. L. Liu, “Beam bending-torsion dynamic stiffness method for calculation of exact vibration modes,” Journal of Sound and Vibration, vol. 85, no. 1, pp. 105–113, 1982. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  13. F. Y. Cheng and W.-H. Tseng, “Dynamic matrix of Timoshenko beam columns,” Journal of the Structural Division, vol. 99, no. 3, pp. 527–549, 1973. View at Google Scholar · View at Scopus
  14. R. Lunden and B. A. Akesson, “Damped second-order Rayleigh-Timoshenko beam vibration in space—an exact complex dynamic member stiffness matrix,” International Journal for Numerical Methods in Engineering, vol. 19, no. 3, pp. 431–449, 1983. View at Publisher · View at Google Scholar · View at Scopus
  15. J. R. Banerjee and F. W. Williams, “Exact Bernoulli-Euler dynamic stiffness matrix for a range of tapered beams,” International Journal for Numerical Methods in Engineering, vol. 21, no. 12, pp. 2289–2302, 1985. View at Publisher · View at Google Scholar · View at Scopus
  16. F. W. Williams and D. Kennedy, “Exact dynamic member stiffnesses for a beam on an elastic foundation,” Earthquake Engineering & Structural Dynamics, vol. 15, no. 1, pp. 133–136, 1987. View at Publisher · View at Google Scholar · View at Scopus
  17. J. T. Oden, “A general theory of finite elements. II. Applications,” International Journal for Numerical Methods in Engineering, vol. 1, no. 3, pp. 247–259, 1969. View at Publisher · View at Google Scholar · View at Scopus
  18. E. Cohen and H. McCallion, “Improved deformation functions for the finite element anlysis of beam systems,” International Journal for Numerical Methods in Engineering, vol. 1, no. 2, pp. 163–167, 1969. View at Publisher · View at Google Scholar
  19. W. S. Woodward and J. W. Morris, “Improving productivity in finite element analysis through interactive processing,” Finite Elements in Analysis and Design, vol. 1, no. 1, pp. 35–48, 1985. View at Publisher · View at Google Scholar · View at Scopus
  20. M. Petyt, Introduction to Finite Element Vibration Analysis, Cambridge University Press, Cambridge, UK, 2010. View at MathSciNet
  21. S. M. Hashemi, Free-vibrational analysis of rotating beam-like structures: a dynamic finite element approach [Ph.D. thesis], Laval University, 1998.
  22. S. M. Hashemi and M. J. Richard, “Free vibrational analysis of axially loaded bending-torsion coupled beams: a dynamic finite element,” Computers & Structures, vol. 77, no. 6, pp. 711–724, 2000. View at Publisher · View at Google Scholar · View at Scopus
  23. S. M. Hashemi and M. J. Richard, “A Dynamic Finite Element (DFE) method for free vibrations of bending-torsion coupled beams,” Aerospace Science and Technology, vol. 4, no. 1, pp. 41–55, 2000. View at Publisher · View at Google Scholar · View at Scopus
  24. A. Joshi and S. Suryanarayan, “Coupled flexural-torsional vibration of beams in the presence of static axial loads and end moments,” Journal of Sound and Vibration, vol. 92, no. 4, pp. 583–589, 1984. View at Publisher · View at Google Scholar · View at Scopus
  25. A. Joshi and S. Suryanarayan, “Unified analytical solution for various boundary conditions for the coupled flexural-torsional vibration of beams subjected to axial loads and end moments,” Journal of Sound and Vibration, vol. 129, no. 2, pp. 313–326, 1989. View at Publisher · View at Google Scholar · View at Scopus
  26. A. Joshi and S. Suryanarayan, “Iterative method for coupled flexural–torsional vibration of initially stressed beams,” Journal of Sound and Vibration, vol. 146, no. 1, pp. 81–92, 1991. View at Publisher · View at Google Scholar · View at Scopus
  27. M. T. Towliat Kashani, S. Jayasinghe, and S. M. Hashemi, “On the flexural-torsional vibration and stability of beams subjected to axial load and end moment,” Shock and Vibration, vol. 2014, Article ID 153532, 11 pages, 2014. View at Publisher · View at Google Scholar
  28. S. Laux, Estimation of axial load in timber beams using resonance frequency analysis [M.S. thesis], Chalmers University of Technology, Gothenburg, Sweden, 2012.