Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2015, Article ID 675861, 8 pages
http://dx.doi.org/10.1155/2015/675861
Research Article

Analysis of a Low-Angle Annular Expander Nozzle

1School of Mechanical and Manufacturing Engineering, UNSW, Sydney, NSW 2052, Australia
2Aerospace Engineering Department, California Polytechnic State University, San Luis Obispo, CA 93407, USA

Received 16 October 2014; Accepted 10 March 2015

Academic Editor: Chao Tao

Copyright © 2015 Kyll Schomberg et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. N. V. Taylor, C. M. Hempsell, J. Macfarlane et al., “Experimental investigation of the evacuation effect in expansion deflection nozzles,” Acta Astronautica, vol. 66, no. 3-4, pp. 550–562, 2010. View at Publisher · View at Google Scholar · View at Scopus
  2. G. P. Sutton and O. Biblarz, Rocket Propulsion Elements, chapter 2, 3, John Wiley & Sons, New York, NY, USA, 7th edition, 2001.
  3. G. V. Rao, “Recent developments in rocket nozzle configurations,” ARS Journal, vol. 31, no. 11, pp. 1488–1494, 1961. View at Publisher · View at Google Scholar
  4. M. Horn and S. Fisher, “Dual-bell altitude compensating nozzles,” NASA CR-194719, National Aeronautics and Space Administration, 1994. View at Google Scholar
  5. G. Hagemann, D. Manski, and G. Krulle, “Dual expander engine flowfield simulations,” in Proceedings of the 31st Joint Propulsion Conference and Exhibit, AIAA 95-3135, AIAA, San Diego, Calif, USA, 1995.
  6. G. V. R. Rao, “Spike nozzle contour for optimum thrust,” Ballistic Missile and Space Technology, vol. 2, pp. 92–101, 1961. View at Google Scholar
  7. G. V. R. Rao, “Analysis of a new concept rocket nozzle,” Journal of Liquid Rockets and Propellants, vol. 2, pp. 669–682, 1960. View at Google Scholar
  8. E. L. Morrisette and T. J. Goldberg, “Turbulent flow separation for overexpanded nozzles,” NASA Technical Paper 1207, 1978. View at Google Scholar
  9. M. Summerfield, C. Foster, and N. Swan, “Flow separation in overexpanded supersonic exhaust nozzles,” Journal of Propulsion, vol. 24, no. 9, pp. 319–321, 1954. View at Google Scholar
  10. R. H. Schmucker, “Status of flow separation prediction in liquid propellant rocket nozzles,” NASA N75-12061/8, 1974. View at Google Scholar
  11. J. Ostlund, Supersonic flow separation with application to rocket engine nozzles [Ph.D. thesis], Royal Institute of Technology, Stockholm, Sweden, 2004.
  12. M. Onofri and F. Nasuti, “The physical origins of side loads in rocket nozzles,” in Proceedings of the 35th Joint Propulsion Conference and Exhibit, AIAA, Los Angeles, Calif, USA, 1999. View at Publisher · View at Google Scholar
  13. G. Hagemann, M. Frey, and D. Manski, “A critical assessment of dual-bell nozzles,” in Proceedings of the 33rd Joint Propulsion Conference and Exhibit, 3299, p. 3297, Seattle, Wash ,USA, 1997. View at Publisher · View at Google Scholar
  14. G. Hagemann, H. Immicht, M. Terhardt, and G. Dumnov, “Critical assessment of the linear plug nozzle concept,” in Proceedings of the AIAA 37th Joint Propulsion Conference and Exhibit, AIAA 2001-3683, Salt Lake City, Utah, USA, July 2001.
  15. R. A. Wasko, “Performance of annular plug and expansion-deflection nozzles including external flow effects at transonic mach numbers,” NASA TN D-4462, 1968. View at Google Scholar
  16. T. J. Mueller, W. P. Sule, and C. R. Hall, “Characteristics of separated flow regions within altitude compensating nozzles variation,” UNDAS TN-029-FR-9, University of Notre Dame, 1971. View at Google Scholar
  17. W. Sutherland, “The viscosity of gases and molecular force,” Philosophical Magazine, vol. 36, pp. 507–531, 1893. View at Google Scholar
  18. P. Spalart and S. Allmaras, “A one-equation turbulence model for aerodynamic flows,” La Recherche Aerospatiale, vol. 1, no. 5, pp. 5–21, 1992. View at Google Scholar
  19. G. C. Doig, T. J. Barber, E. Leonardi, A. J. Neely, and H. Kleine, “Methods for investigating supersonic ground effect in a blowdown wind tunnel,” Shock Waves, vol. 18, no. 2, pp. 155–159, 2008. View at Publisher · View at Google Scholar · View at Scopus
  20. G. Doig, T. J. Barber, E. Leonardi, A. J. Neely, H. Kleine, and F. Coton, “Aerodynamics of a supersonic projectile in proximity to a solid surface,” AIAA Journal, vol. 48, no. 12, pp. 2916–2930, 2010. View at Publisher · View at Google Scholar · View at Scopus
  21. G. Doig, “Transonic and supersonic ground effect aerodynamics,” Progress in Aerospace Sciences, vol. 69, pp. 1–28, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. K. Schomberg and J. Olsen, “Altitude compensation in expansion deflection nozzles,” in Proceedings of the 18th Australian Fluid Mechanics Conference, Launceston, Australia, 2012.
  23. F. R. Menter, “Two-equation eddy-viscosity turbulence models for engineering applications,” AIAA Journal, vol. 32, no. 8, pp. 1598–1605, 1994. View at Publisher · View at Google Scholar · View at Scopus
  24. T. H. Shih, W. W. Liou, A. Shabbir, and J. Zhu, “A new k-epsilon eddy-viscosity model for high Reynolds number turbulent flows—model development and validation,” Computers Fluids, vol. 24, no. 3, pp. 227–238, 1995. View at Google Scholar
  25. G. Hagemann, R. Schwane, P. Reijasse, and J. Ruf, “Nato TRO WG 10—CFD results of plug nozzle test cases,” in Proceedings of the 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, AIAA 2002-4036, Indianapolis, Ind, USA, 2002.
  26. T. J. Mueller, “Determination of the turbulent base pressure in supersonic axisymmetric flow,” in Proceedings of the 3rd Propulsion Joint Specialist Conference, AIAA paper 67-446, Washington, DC, USA, 1967. View at Publisher · View at Google Scholar
  27. R. H. Stark, “Flow separation in rocket nozzles, a simple criteria,” in Proceedings of the 41st Joint Propulsion Conference and Exhibit, AIAA 2005-3940, AIAA, Tuscon, Ariz, USA, 2005.