Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2015, Article ID 740471, 13 pages
http://dx.doi.org/10.1155/2015/740471
Research Article

A Wireless Strain Sensor Network for Structural Health Monitoring

1Key Laboratory of C&PC Structures, Southeast University, Nanjing 211189, China
2Department of Civil and Environmental Engineering, Harbin Institute of Technology, Shenzhen Graduate School, Shenzhen 518055, China

Received 7 August 2014; Accepted 15 January 2015

Academic Editor: Gangbing Song

Copyright © 2015 Chengyin Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. V. Giurgiutiu, J. M. Redmond, D. P. Roach, and K. Rackow, “Active sensors for health monitoring of aging aerospace structures,” in 7th Annual International Symposium on Smart Structures and Materials, vol. 3985 of Proceedings of SPIE, pp. 294–305, The International Society for Optical Engineering, June 2000. View at Publisher · View at Google Scholar
  2. B. F. Spencer, “Opportunities and challenges for smart sensing technology,” in Proceedings of the 1st International Conference on Structural Health Monitoring and Intelligent Infrastructure, pp. 65–72, Tokyo, Japan, 2003.
  3. J. Hill, R. Szewczyk, A. Woo, S. Hollar, D. Culler, and K. Pister, “System architecture directions for networked sensors,” in Proceedings of the 9th International Conference on Architectural Support for Programming Languages and Operating Systems, pp. 93–104, Cambridge, Mass, USA, 2000.
  4. N. Kurata, B. F. Spencer, M. Ruiz-Sandoval, Y. Miyamoto, and Y. Sako, “A study on building risk monitoring using wireless sensor network MICA-Mote,” in Proceedings of the 1st International Conference on Structural Health Monitoring and Intelligent Infrastructure, pp. 353–363, Tokyo, Japan, 2003.
  5. Crossbow Technology Incorporated, http://www.xbow.com.cn/.
  6. J. Paek and R. Govindan, “RCRT: rate-controlled reliable transport protocol for wireless sensor networks,” ACM Transactions on Sensor Networks, vol. 7, no. 3, article 20, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. S. Kim, S. Pakzad, D. Culler et al., “Health monitoring of civil infrastructures using wireless sensor networks,” in Proceedings of the of the 6th International Conference on Information Processing in Sensor Networks, pp. 254–263, Cambridge, Mass, USA, 2007.
  8. B. A. Sundaram, K. Ravisankar, R. Senthil, and S. Parivallal, “Wireless sensors for structural health monitoring and damage detection techniques,” Current Science, vol. 104, no. 11, pp. 1496–1505, 2013. View at Google Scholar · View at Scopus
  9. J. P. Lynch, Y. Wang, K. H. Law, J. H. Yi, C. G Lee, and C. B. Yun, “Validation of a large-scale wireless structure monitoring system on the Geumdang bridge,” in Proceedings of the 4th International Conference on Safety and Structural Reliability (ICOSSAR '05), Rome, Italy, 2005.
  10. M. Bocca, E. I. Cosar, J. Salminen, and L. M. Eriksson, “A reconfigurable wireless sensor network for structural health monitoring,” in Proceedings of the 4th International Conference on Structural Health Monitoring on Intelligent Infrastructure (SHMII '09), pp. 22–24, Zurich, Switzerland, 2009.
  11. M. Bocca, L. M. Eriksson, A. Mahmood, R. Jäntti, and J. Kullaa, “A synchronized wireless sensor network for experimental modal analysis in structural health monitoring,” Computer-Aided Civil and Infrastructure Engineering, vol. 26, no. 7, pp. 483–499, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Bocca, J. Toivola, L. M. Eriksson, J. Hollmén, and H. Koivo, “Structural health monitoring in wireless sensornetworks by the embedded Goertzel algorithm,” in Proceedings of the IEEE/ACM International Conference on Cyber-Physical Systems (ICCPS '11), pp. 206–214, IEEE, Chicago, Ill, USA, April 2011. View at Publisher · View at Google Scholar
  13. J. S. Leng, D. Winter, R. A. Barnes, G. C. Mays, and G. F. Fernando, “Structural health monitoring of concrete cylinders using protected fibre optic sensors,” Smart Materials and Structures, vol. 15, no. 2, pp. 302–308, 2006. View at Publisher · View at Google Scholar · View at Scopus
  14. H. de Backer, W. de Corte, and P. van Bogaert, “A case study on strain gauge measurements on large post-tensioned concrete beams of a railway support structure,” Insight: Non-Destructive Testing and Condition Monitoring, vol. 45, no. 12, pp. 822–830, 2003. View at Publisher · View at Google Scholar · View at Scopus
  15. K. G. Ong and C. A. Grimes, “Tracking the harmonic response of magnetically-soft sensors for wireless temperature, stress, and corrosive monitoring,” Sensors and Actuators A: Physical, vol. 101, no. 1-2, pp. 49–61, 2002. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Shiraishi, H. Kumagai, H. Inada, Y. Okuhara, and H. Matsubara, “The SHM system using self-diagnosis material and wireless data measurement device,” in Smart Structures and Materials 2005: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, vol. 5765 of Proceedings of SPIE, pp. 187–194, 2005.
  17. R. C. Tennyson, T. Coroy, G. Duck et al., “Fibre optic sensors in civil engineering structures,” Canadian Journal of Civil Engineering, vol. 27, no. 5, pp. 880–889, 2000. View at Publisher · View at Google Scholar · View at Scopus
  18. J. T. DeWolf, R. G. Lauzon, and M. P. Culmo, “Monitoring bridge performance,” Structural Health Monitoring, vol. 1, no. 2, pp. 129–138, 2002. View at Google Scholar · View at Scopus
  19. E. Shehata and S. Rizkall, “Intelligent sensing for innovative bridges,” Journal of Intelligent Material Systems and Structures, vol. 10, no. 4, pp. 304–313, 1999. View at Publisher · View at Google Scholar
  20. M. J. Whelan, M. V. Gangone, and K. D. Janoyan, “Highway bridge assessment using an adaptive real-time wireless sensor network,” IEEE Sensors Journal, vol. 9, no. 11, pp. 1405–1413, 2009. View at Google Scholar
  21. M. V. Gangone, M. J. Whelan, and K. D. Janoyan, “Wireless monitoring of a multispan bridge superstructure for diagnostic load testing and system identification,” Computer-Aided Civil and Infrastructure Engineering, vol. 26, no. 7, pp. 560–579, 2011. View at Publisher · View at Google Scholar · View at Scopus
  22. S. W. Doebling, C. R. Farrar, M. B. Prime, and D. W. Shevitz, “Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review,” Tech. Rep. LA-13070-MS, Los Alamos National Laboratory, 1996. View at Publisher · View at Google Scholar
  23. Y. Lei, A. S. Kiremidjian, K. K. Nair, J. P. Lynch, and K. H. Law, “Algorithms for time synchronization of wireless structural monitoring sensors,” Earthquake Engineering & Structural Dynamics, vol. 34, no. 6, pp. 555–573, 2005. View at Publisher · View at Google Scholar · View at Scopus
  24. Y. Wang, J. P. Lynch, and K. H. Law, “A wireless structural health monitoring system with multithreaded sensing devices: Design and validation,” Structure and Infrastructure Engineering, vol. 3, no. 2, pp. 103–120, 2007. View at Publisher · View at Google Scholar · View at Scopus