Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2015, Article ID 817598, 19 pages
http://dx.doi.org/10.1155/2015/817598
Research Article

Experimental Investigation of Ultrasonic Vibration Assisted Turning of 304 Austenitic Stainless Steel

1School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110819, China
2Department of Mechanical Engineering, Northwestern University, Evanston, IL 60208, USA

Received 10 May 2015; Revised 4 August 2015; Accepted 4 August 2015

Academic Editor: Jörg Wallaschek

Copyright © 2015 Ping Zou et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [16 citations]

The following is the list of published articles that have cited the current article.

  • Varun Sharma, and Pulak M. Pandey, “Optimization of Machining and Vibration Parameters for Residual Stresses Minimization In Ultrasonic Assisted Turning of 4340 Hardened Steel,” Ultrasonics, 2016. View at Publisher · View at Google Scholar
  • Yingshuai Xu, Ping Zou, Yu He, Shuo Chen, Yingjian Tian, and Xingjun Gao, “Comparative experimental research in turning of 304 austenitic stainless steel with and without ultrasonic vibration,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 231, no. 15, pp. 2885–2901, 2016. View at Publisher · View at Google Scholar
  • Yu He, Ping Zou, Wu-Le Zhu, and Kornel F. Ehmann, “Ultrasonic elliptical vibration cutting of hard materials: simulation and experimental study,” The International Journal of Advanced Manufacturing Technology, vol. 91, no. 1-4, pp. 363–374, 2016. View at Publisher · View at Google Scholar
  • Varun Sharma, and Pulak Mohan Pandey, “Study of ultrasonic assisted turning of 4340 steel with plane and selflubricating cutting inserts,” ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016, vol. 1, 2016. View at Publisher · View at Google Scholar
  • Saeid Amini, Mohsen Aghaei, Mohammad Lotfi, and Emad Hakimi, “Analysis of linear vibration in rotary turning of AISI 4140 steel,” International Journal of Advanced Manufacturing Technology, vol. 91, no. 9-12, pp. 4107–4116, 2017. View at Publisher · View at Google Scholar
  • Mohammad Lotfi, Saeid Amini, and Mohsen Aghaei, “Tool Wear Prediction and Surface Improvement in Vibration Cutting,” Tribology Transactions, pp. 1–10, 2017. View at Publisher · View at Google Scholar
  • Haris Rachmat, M. Rasidi Ibrahim, and Sulaiman Bin Hasan, “Design selection of an innovative tool holder for ultrasonic vibration assisted turning (IN-UVAT) using finite element analysis simulation,” AIP Conference Proceedings, vol. 1831, 2017. View at Publisher · View at Google Scholar
  • S. Kumar, C.S. Wu, G.K. Padhy, and W. Ding, “Application of ultrasonic vibrations in welding and metal processing: A status review,” Journal of Manufacturing Processes, vol. 26, pp. 295–322, 2017. View at Publisher · View at Google Scholar
  • Varun Sharma, and Pulak Mohan Pandey, “Experimental investigations and statistical modeling of surface roughness during ultrasonic-assisted turning with self-lubricating cutting inserts,” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pp. 095440891773812, 2017. View at Publisher · View at Google Scholar
  • Mohammad Lotfi, Saeid Amini, and Mohsen Aghaei, “3D analysis of surface topography in vibratory turning,” The International Journal of Advanced Manufacturing Technology, 2017. View at Publisher · View at Google Scholar
  • Mehmet Alper Sofuoğlu, Fatih Hayati Çakır, Selim Gürgen, Sezan Orak, and Melih Cemal Kuşhan, “Experimental investigation of machining characteristics and chatter stability for Hastelloy-X with ultrasonic and hot turning,” The International Journal of Advanced Manufacturing Technology, 2017. View at Publisher · View at Google Scholar
  • Ying-Shuai Xu, Ping Zou, Wei Wang, and Xu-Lei Yang, “Investigation on ultrasonic vibration assisted turning of Ni-based superalloy and Al-Mg alloy,” Dongbei Daxue Xuebao/Journal of Northeastern University, vol. 38, no. 1, pp. 95–100, 2017. View at Publisher · View at Google Scholar
  • Mehmet Alper Sofuoğlu, Fatih Hayati Çakır, Melih Cemal Kuşhan, and Sezan Orak, “Optimization of different non-traditional turning processes using soft computing methods,” Soft Computing, 2018. View at Publisher · View at Google Scholar
  • Yu He, Ping Zou, Zhiwei Zhu, Wu-Le Zhu, Xu Yang, Jian Cao, and Kornel F. Ehmann, “Design and application of a flexure-based oscillation mechanism for surface texturing,” Journal of Manufacturing Processes, vol. 32, pp. 298–306, 2018. View at Publisher · View at Google Scholar
  • Varun Sharma, Pulak M. Pandey, Uday S. Dixit, Anish Roy, and Vadim V. Silberschmidt, “Ultrasonic Assisted Turning: A Comparative Study of Surface Integrity,” Precision Product-Process Design and Optimization, pp. 337–360, 2018. View at Publisher · View at Google Scholar
  • S. Kumar, W. Ding, Z. Sun, and C. S. Wu, “Analysis of the dynamic performance of a complex ultrasonic horn for application in friction stir welding,” The International Journal of Advanced Manufacturing Technology, 2018. View at Publisher · View at Google Scholar