Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2015, Article ID 857978, 23 pages
http://dx.doi.org/10.1155/2015/857978
Research Article

An Experimental Study on Dynamics of a Novel Dual-Belt Continuous Variable Transmission Based on a Newly Developed Test Rig

Department of Electromechanical Engineering, University of Macau, Taipa, Macau

Received 9 March 2015; Revised 11 May 2015; Accepted 18 May 2015

Academic Editor: Roger Serra

Copyright © 2015 Pak Kin Wong et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Dong, Y. Cao, and Z. Fang, “Dynamic vibration characteristic analysis for the power-split transmission system based on loaded tooth contact analysis,” Shock and Vibration. In press.
  2. G. Mantriota, “Fuel consumption of a vehicle with power split CVT system,” International Journal of Vehicle Design, vol. 37, no. 4, pp. 327–342, 2005. View at Publisher · View at Google Scholar · View at Scopus
  3. T. Toyoda, T. Imanishi, and E. Inoue, “Fuel economy improvement items with toroidal continuously variable transmission,” in Proceedings of the CVT-Hybrid International Conference, pp. 67–72, 2010.
  4. F. Bottiglione, G. Carbone, L. D. Novellis, L. Mangialardi, and G. Mantriota, “Mechanical hybrid KERS based on toroidal traction drives: an example of smart tribological design to improve terrestrial vehicle performance,” Advances in Tribology, vol. 2013, Article ID 918387, 9 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. F. Bottiglione and G. Mantriota, “Effect of the ratio spread of CVU in automotive kinetic energy recovery systems,” Transactions of the ASME—Journal of Mechanical Design, vol. 135, no. 6, Article ID 061001, 2013. View at Publisher · View at Google Scholar · View at Scopus
  6. G. Carbone, L. Mangialardi, and G. Mantriota, “Theoretical model of metal V-belt drives during rapid ratio changing,” Journal of Mechanical Design, vol. 123, no. 1, pp. 111–117, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. G. Carbone, L. Mangialardi, and G. Mantriota, “Influence of clearance between plates in metal pushing V-belt dynamics,” Journal of Mechanical Design, vol. 124, no. 3, pp. 543–557, 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. G. Carbone, L. Mangialardi, and G. Mantriota, “The influence of pulley deformations on the shifting mechanism of metal belt CVT,” Journal of Mechanical Design, vol. 127, no. 1, pp. 103–113, 2005. View at Publisher · View at Google Scholar · View at Scopus
  9. G. Carbone, L. Mangialardi, B. Bonsen, C. Tursi, and P. A. Veenhuizen, “CVT dynamics: theory and experiments,” Mechanism and Machine Theory, vol. 42, no. 4, pp. 409–428, 2007. View at Publisher · View at Google Scholar · View at Scopus
  10. N. Srivastava and I. Haque, “A review on belt and chain continuously variable transmissions (CVT): dynamics and control,” Mechanism and Machine Theory, vol. 44, no. 1, pp. 19–41, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. B. Bonsen, T. W. G. L. Klaassen, K. G. O. Van de Meerakker, M. Steinbuch, and P. A. Veenhulzen, “Analysis of slip in a continuously variable transmission,” in Proceedings of the ASME International Mechanical Engineering Congress (IMECE '03), pp. 995–1000, November 2003. View at Publisher · View at Google Scholar · View at Scopus
  12. H. Kim and J. Lee, “Analysis of belt behavior and slip characteristics for a metal V-belt CVT,” Mechanism and Machine Theory, vol. 29, no. 6, pp. 865–876, 1994. View at Publisher · View at Google Scholar · View at Scopus
  13. W. Ryu and H. Kim, “CVT ratio control with consideration of CVT system loss,” International Journal of Automotive Technology, vol. 9, no. 4, pp. 459–465, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. Nissan Maxima, 2013, http://www.nissanusa.com/maxima/specifications.html.
  15. F. Sorge, “Variational approach to the mechanics of metal V-belt systems,” International Journal of Vehicle Design, vol. 39, no. 3, pp. 189–207, 2005. View at Publisher · View at Google Scholar · View at Scopus
  16. K. Narita and M. Priest, “Metal-metal friction characteristics and the transmission efficiency of a metal V-belt-type continuously variable transmission,” Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, vol. 221, no. 1, pp. 11–26, 2007. View at Publisher · View at Google Scholar · View at Scopus
  17. N. Srivastava and I. Haque, “On the transient dynamics of a metal pushing V-belt CVT at high speeds,” International Journal of Vehicle Design, vol. 37, no. 1, pp. 46–66, 2005. View at Publisher · View at Google Scholar · View at Scopus
  18. N. Srivastava and I. Haque, “Transient dynamics of the metal V-belt CVT: effects of pulley flexibility and friction characteristics,” Journal of Computational and Nonlinear Dynamics, vol. 2, no. 1, pp. 86–97, 2007. View at Publisher · View at Google Scholar · View at Scopus
  19. N. Srivastava and I. Haque, “Transient dynamics of metal V-belt CVT: effects of band pack slip and friction characteristic,” Mechanism and Machine Theory, vol. 43, no. 4, pp. 459–479, 2008. View at Publisher · View at Google Scholar · View at Scopus
  20. C. H. Zheng, W. S. Lim, and S. W. Cha, “Performance optimization of CVT for two-wheeled vehicles,” International Journal of Automotive Technology, vol. 12, no. 3, pp. 461–468, 2011. View at Publisher · View at Google Scholar · View at Scopus
  21. A. Karam and D. Play, “A discrete analysis of metal-v belt drive,” in Proceedings of the ASME International Power Transmission and Gearing Conference, vol. 43, pp. 319–327, 2013.
  22. B. Supriyo, K. B. Tawi, and H. Jamaluddin, “Experimental study of an electro-mechanical CVT ratio controller,” International Journal of Automotive Technology, vol. 14, no. 2, pp. 313–323, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. K. U. Chan, P. K. Wong, and H. W. Wu, “Preliminary study on design and control of a novel CVT,” JSAE Paper 20097011, 2009. View at Google Scholar
  24. A. W. Brown, J. van Rooij, and A. A. Frank, “The design of an inline GCI chain cvt for large vehicles,” in Proceedings of the International Continuously Variable and Hybrid Transmission Congress, no. 54, September 2004.
  25. M. F. Oudijk, Optimization of CVT control for hybrid and conventional drive lines [M.S. thesis], Eindhoven University of Technology, 2005.
  26. H. Sattler, “Efficiency of metal chain and V-belt CVT,” in Proceedings of the International Congress on Continuously Variable Power Transmission (CVT '99), Eindhoven, The Netherlands, September 1999.
  27. Luk, 2012, http://www.luk.de/content.luk.de/en/.
  28. Transmissions, 2013, http://automotive.roger.free.fr/main_pages/main_transmission.html.
  29. Y. Q. Chen, P. K. Wong, Z. C. Xie, H. W. Wu, K. U. Chan, and J. L. Huang, “Modelling of a novel dual-belt continuously variable transmission for automobiles,” World Academy of Science, Engineering and Technology, no. 70, pp. 1157–1161, 2012. View at Google Scholar
  30. K. Hagiwara, S. Terayama, Y. Takeda, K. Yoda, and S. Suzuki, “The development and utilization of hardware-in-the-loop simulation for the development of an automatic transmission control system,” SAE Paper No. 2002-01-1255, 2002. View at Google Scholar
  31. K. Hagiwara, S. Terayama, Y. Takeda, K. Yoda, and S. Suzuki, “Development of automatic transmission control system using hardware-in-the-loop simulation system,” JSAE Review, vol. 23, no. 1, pp. 55–59, 2002. View at Publisher · View at Google Scholar · View at Scopus
  32. K. Hagiwara, R. Ito, K. Yoda, and H. Saotome, “Development of transient state model for CVT-HILS,” Honda R&D Technical Review, vol. 17, no. 1, pp. 65–72, 2005. View at Google Scholar
  33. S. Bai, R. Moses, T. Schanz, and M. Gorman, “Development of a new clutch-to-clutch shift control technology,” SAE Paper No. 2002-01-1252, 2002. View at Google Scholar
  34. T. Matsumura, S. Ichikawa, F. Katsu, and M. Sato, “The development of a controller confirmation system for automatic transmissions and its applications,” in Proceedings of the IEEE International Conference on Control Applications, pp. 1415–1419, September 2004. View at Scopus
  35. T. Brendecke and F. Küçükay, “Virtual real-time environment for automatic-transmission control units in the form of hardware-in-the-loop,” International Journal of Vehicle Design, vol. 28, no. 1, pp. 84–102, 2002. View at Publisher · View at Google Scholar · View at Scopus
  36. Q. Z. Yan, J. M. Williams, and J. Li, “Chassis control system development using simulation: software in the loop, rapid prototyping, and hardware in the loop,” SAE Paper No. 2002-01-1565, 2002. View at Google Scholar
  37. Q. Z. Yan, F. C. Thompson, R. E. Paul, and J. J. Bielenda, “Hardware in the loop for dynamic chassis control algorithms test and validation,” SAE Paper No. 2004-01-2059, 2004. View at Google Scholar
  38. Q. Z. Yan, F. Oueslati, J. Bielenda, and J. Hirshey, “Hardware in the loop for a dynamic driving system controller testing and validation,” SAE Paper No. 2005-01-1667, 2005. View at Google Scholar
  39. W. H. Oh, J. H. Lee, H. G. Kwon, and H. J. Yoon, “Model-based development of automotive embedded systems: a case of continuously variable transmission (CVT),” in Proceedings of the 11th IEEE International Conference on Embedded and Real-Time Computing Systems and Applications, pp. 201–204, August 2005. View at Publisher · View at Google Scholar · View at Scopus
  40. J. Steiber, B. Surampudi, M. Rosati, M. Turbett, R. Hansen, and T. Tower, “Modeling, simulation, and hardware-in-the-loop transmission test system software development,” SAE Paper No. 2003-01-0673, 2003. View at Google Scholar
  41. J. Steiber, B. Surampudi, B. Treichel, and M. Kluger, “Vehicle HIL, the near term solution for optimizing engine and transmission development,” SAE Paper No. 2005-01-1050, 2005. View at Google Scholar
  42. An Automated Design Synthesis System Involving Hardware-In-the-Loop Simulation, 2014, http://www.opal-rt.com/fr/node/383.
  43. X.-A. Sun, G.-Q. Wu, L. He, and G.-L. Kong, “Hardware-in-the-loop simulation for electro-control system of continuously variable transmission based on dSPACE,” in Proceedings of the IEEE Vehicle Power and Propulsion Conference (VPPC '08), pp. 1–5, September 2008. View at Publisher · View at Google Scholar · View at Scopus
  44. S. W. Yang and D. Q. Zhao, “Object-oriented modeling and real-time simulation of planetary gearbox with modelica and simulink,” in Proceedings of the 6th International Symposium on Test and Measurement, pp. 773–776, 2005.
  45. M. R. Turbett, R. M. Senseney, S. D. Nash et al., “Virtual vehicle transmission test cell,” Google Patents, 2004.
  46. S. Gao, Y. An, Y.-S. Zhou, and C.-X. Song, “CVT fault diagnosis based on immune principle and oil spectrum analysis,” in Proceedings of the IEEE 5th International Conference on Bio-Inspired Computing: Theories and Applications (BIC-TA '10), pp. 1106–1110, IEEE, Changsha, China, September 2010. View at Publisher · View at Google Scholar · View at Scopus
  47. F. Katsu and T. Matsumura, “Practical use of HILS and an approach to MBCSD for AT and CVT development,” in Proceedings of the IEEE International Conference on Control Applications (CCA '06), pp. 2111–2114, Munich, Germany, October 2006. View at Publisher · View at Google Scholar · View at Scopus
  48. Q. Zheng, W. W. Chung, K. Defore, and A. Herman, “A hardware-in-the-loop test bench for production transmission controls software quality validation,” SAE Paper 2007-01-0502, 2007. View at Google Scholar
  49. Q. Zheng, A. Habeebullah, W. W. Chung, and A. Herman, “A 6-speed automatic transmission plant dynamics model for HIL test bench,” SAE Paper No. 2008-01-0630, 2008. View at Google Scholar
  50. Subaru, 2010, http://drive2.subaru.com/Sum09/Sum09_whatmakes.htm.
  51. B. Bonsen, Efficiency optimization of the push-belt CVT by variator slip control [Ph.D. thesis], Eindhoven University of Technology, Eindhoven, The Netherlands, 2006.
  52. H. A. Rothbart and T. H. Brown, Mechanical Design Handbook, McGraw-Hill, New York, NY, USA, 2006.
  53. J. Yamaguchi, K. Okubo, T. Fujii, R. Kido, and M. Takahasi, “Study on power transmitting efficiency of CVT using a dry hybrid V-belt,” in Proceedings of the 8th International Conference on Urban Transport and the Environment in the 21st Century, pp. 807–816, 2002.
  54. J. L. Xu, X. Y. Su, and B. Peng, “Numerical analysis and demonstration: transmission shaft influence on meshing vibration in driving and driven gears,” Shock and Vibration. In press.
  55. W. X. Liu, Vehicle Axle Design, Tsinghua University Press, 2004, (Chinese).