Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016, Article ID 2590816, 13 pages
http://dx.doi.org/10.1155/2016/2590816
Research Article

Effects of Interface Damage Resulting from the Separation of Layered Strata on Bolt Anchoring Systems

School of Mines, Key Laboratory of Deep Coal Resource Mining, Ministry of Education, China University of Mining and Technology, Xuzhou 221116, China

Received 14 September 2015; Revised 2 December 2015; Accepted 14 December 2015

Academic Editor: Salvatore Russo

Copyright © 2016 Xiaowei Feng et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. S. Peng, “Topical areas of research needs in ground control—a state of the art review on coal mine ground control,” International Journal of Mining Science and Technology, vol. 25, no. 1, pp. 1–6, 2015. View at Publisher · View at Google Scholar
  2. X. G. Zheng, J. B. Hua, N. Zhang, X. W. Feng, and L. Zhang, “Simulation of the load evolution of an anchoring system under a blasting impulse load using FLAC3D,” Shock and Vibration, vol. 2015, Article ID 972720, 8 pages, 2015. View at Publisher · View at Google Scholar
  3. T. B. Zhao, W. Y. Guo, Y. C. Yin, and Y. L. Tan, “Bolt pull-out tests of anchorage body under different loading rates,” Shock and Vibration, vol. 2015, Article ID 121673, 8 pages, 2015. View at Publisher · View at Google Scholar
  4. S. L. Lu, L. Tang, and X. A. Yang, Anchor Force and Anchoring Technology, China Coal Industry Publishing House, Beijing, China, 1998.
  5. Z. Y. Zheng and N. J. Huang, Resin Anchor Bolts and Capsules, China Coal Industry Publishing House, Beijing, China, 1983.
  6. A. Paul, A. P. Singh, J. Loui P, A. K. Singh, and M. Khandelwal, “Validation of RMR-based support design using roof bolts by numerical modeling for underground coal mine of Monnet Ispat, Raigarh, India-a case study,” Arabian Journal of Geosciences, vol. 5, no. 6, pp. 1435–1448, 2012. View at Publisher · View at Google Scholar
  7. C.-L. Han, N. Zhang, G.-C. Li, and J.-G. Kan, “Bed separation mechanism under sequential roof collapse condition in a gob-side entry retaining,” Journal of China University of Mining and Technology, vol. 41, no. 6, pp. 893–899, 2012. View at Google Scholar · View at Scopus
  8. W. J. Ju, “Monitoring technology for rock bolting engineering,” Journal of China Coal Society, vol. 25, supplement, pp. 58–61, 2000. View at Google Scholar
  9. C. Cao, T. Ren, and C. Chris, “Introducing aggregate into grouting material and its influence on load transfer of the rock bolting system,” International Journal of Mining Science and Technology, vol. 24, no. 3, pp. 325–328, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. A. J. Hyett, W. F. Bawden, G. R. Macsporran, and M. Moosavi, “A constitutive law for bond failure of fully-grouted cable bolts using a modified hoek cell,” International Journal of Rock Mechanics and Mining Sciences and, vol. 32, no. 1, pp. 11–36, 1995. View at Publisher · View at Google Scholar · View at Scopus
  11. Y. Cai, T. Esaki, and Y. J. Jiang, “A rock bolt and rock mass interaction model,” International Journal of Rock Mechanics and Mining Sciences, vol. 41, no. 7, pp. 1055–1067, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. L. B. Martín, M. Tijani, F. Hadj-Hassen, and A. Noiret, “Assessment of the bolt-grout interface behaviour of fully grouted rockbolts from laboratory experiments under axial loads,” International Journal of Rock Mechanics and Mining Sciences, vol. 63, pp. 50–61, 2013. View at Publisher · View at Google Scholar · View at Scopus
  13. F. F. Ren, Z. J. Yang, J. F. Chen, and W. W. Chen, “An analytical analysis of the full-range behaviour of grouted rockbolts based on a tri-linear bond-slip model,” Construction and Building Materials, vol. 24, no. 3, pp. 361–370, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. P. K. Kaiser, S. Yazici, and J. Nosé, “Effect of stress change on the bond strength of fully grouted cables,” International Journal of Rock Mechanics and Mining Sciences and, vol. 29, no. 3, pp. 293–306, 1992. View at Publisher · View at Google Scholar · View at Scopus
  15. W. Nie, Z. Y. Zhao, Y. J. Ning, and J. P. Sun, “Development of rock bolt elements in two-dimensional discontinuous deformation analysis,” Rock Mechanics and Rock Engineering, vol. 47, no. 6, pp. 2157–2170, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. B. Benmokrane, A. Chennouf, and H. S. Mitri, “Laboratory evaluation of cement-based grouts and grouted rock anchors,” International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 32, no. 7, pp. 633–642, 1995. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Moosavi, A. Jafari, and A. Khosravi, “Bond of cement grouted reinforcing bars under constant radial pressure,” Cement and Concrete Composites, vol. 27, no. 1, pp. 103–109, 2005. View at Publisher · View at Google Scholar · View at Scopus
  18. I. W. Farmer, “Stress distribution along a resin grouted rock anchor,” International Journal of Rock Mechanics and Mining Sciences and, vol. 12, no. 11, pp. 347–351, 1975. View at Publisher · View at Google Scholar · View at Scopus
  19. S.-M. He, J.-C. Tian, and J.-T. Zhou, “Study on load transfer of bond prestressed anchor rope,” Chinese Journal of Rock Mechanics and Engineering, vol. 25, no. 1, pp. 117–121, 2006. View at Google Scholar · View at Scopus
  20. C. A. You, Y. B. Zhan, Q. Y. Liu, L. L. Sun, and K. B. Wang, “Shear lag-debonding model for anchorage section of prestressed anchor cable,” Chinese Journal of Rock Mechanics and Engineering, vol. 32, no. 4, pp. 800–806, 2013. View at Google Scholar · View at Scopus
  21. C. X. Zhu, X. Chang, Y. D. Men, and X. L. Luo, “Modeling of grout crack of rockbolt grouted system,” International Journal of Mining Science and Technology, vol. 25, no. 1, pp. 73–77, 2015. View at Publisher · View at Google Scholar
  22. C. C. Li, “A practical problem with threaded rebar bolts in reinforcing largely deformed rock masses,” Rock Mechanics and Rock Engineering, vol. 40, no. 5, pp. 519–524, 2007. View at Publisher · View at Google Scholar · View at Scopus
  23. H. Jalalifar and N. Aziz, “Analytical behaviour of bolt-joint intersection under lateral loading conditions,” Rock Mechanics and Rock Engineering, vol. 43, no. 1, pp. 89–94, 2010. View at Publisher · View at Google Scholar · View at Scopus
  24. S.-H. Chen, S. Qiang, S.-F. Chen, and P. Egger, “Composite element model of the fully grouted rock bolt,” Rock Mechanics and Rock Engineering, vol. 37, no. 3, pp. 193–212, 2004. View at Google Scholar · View at Scopus
  25. A. J. Hyett, M. Moosavi, and W. F. Bawden, “Load distribution along fully grouted bolts, with emphasis on cable bolt reinforcement,” International Journal for Numerical and Analytical Methods in Geomechanics, vol. 20, no. 7, pp. 517–544, 1996. View at Google Scholar · View at Scopus
  26. S. M. He and X. P. Li, “Study on mechanism of prestressed anchor bolt,” Chinese Journal of Rock Mechanics and Engineering, vol. 25, no. 9, pp. 1876–1880, 2006. View at Google Scholar · View at Scopus
  27. C. C. Li, “Field observations of rock bolts in high stress rock masses,” Rock Mechanics and Rock Engineering, vol. 43, no. 4, pp. 491–496, 2010. View at Publisher · View at Google Scholar · View at Scopus
  28. L. A. Panek, Principles of Reinforcing Bedded Mine Roof with Bolts, US Department of the Interior, Bureau of Mines, 1956.
  29. C. Li and B. Stillborg, “Analytical models for rock bolts,” International Journal of Rock Mechanics and Mining Sciences, vol. 36, no. 8, pp. 1013–1029, 1999. View at Publisher · View at Google Scholar · View at Scopus
  30. B. Stillborg, Professional Users Handbook for Rock Bolting, Trans Tech Publications, Clausthal-Zellerfelt, Germany, 1994.
  31. W. F. Bawden, A. J. Hyett, and P. Lausch, “An experimental procedure for the in situ testing of cable bolts,” International Journal of Rock Mechanics and Mining Sciences and, vol. 29, no. 5, pp. 525–533, 1992. View at Publisher · View at Google Scholar · View at Scopus
  32. X. G. Zheng, Evolutionary Mechanism of Bolt's(Cable's) Lift Anchoring Force and Surrounding Rock Controlling Technology of Roadway in Coalmine, China University of Mining and Technology, Xuzhou, China, 2013.
  33. S. L. Lu, G. B. Fu, and L. Tang, “Regularity of deformation of rocks around roadway under mining influence and change of rockbolt resistance,” Journal of China University of Mining and Technology, vol. 19, no. 4, pp. 201–203, 1999. View at Google Scholar · View at Scopus
  34. F. Bjornfot and O. Stephansson, “Interaction of grouted rock bolts and hard rock masses at variable loading in a test drift of the Kiirunavaara Mine, Sweden,” in Proceedings of the International Symposium on Rock Bolting, pp. 377–395, Balkema, Rotterdam, The Netherlands, 1984. View at Google Scholar