Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016, Article ID 4056236, 13 pages
http://dx.doi.org/10.1155/2016/4056236
Research Article

Harmonic Transfer Function Based Damage Identification of Breathing Cracked Jeffcott Rotor

The University of Tennessee, Knoxville, TN 37996, USA

Received 9 August 2015; Revised 26 November 2015; Accepted 15 December 2015

Academic Editor: Evgeny Petrov

Copyright © 2016 Jie Zhao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. A. Papadopoulos, “The strain energy release approach for modeling cracks in rotors: a state of the art review,” Mechanical Systems and Signal Processing, vol. 22, no. 4, pp. 763–789, 2008. View at Publisher · View at Google Scholar · View at Scopus
  2. N. Bachschmid and R. Dellupi, “Non linear behaviour of oil film bearings and its relevance in force identification procedures,” in Proceedings of the International Gas Turbine and Aeroengine Congress and Exhibition, vol. 4 of ASME Proceedings, Orlando, Fla, USA, June 1997. View at Publisher · View at Google Scholar
  3. A. S. Sekhar, “Crack identification in a rotor system: a model-based approach,” Journal of Sound and Vibration, vol. 270, no. 4-5, pp. 887–902, 2004. View at Publisher · View at Google Scholar · View at Scopus
  4. G. M. Dong, J. Chen, and J. Zou, “Parameter identification of a rotor with an open crack,” European Journal of Mechanics—A: Solids, vol. 23, no. 2, pp. 325–333, 2004. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Karthikeyan, R. Tiwari, and S. Talukdar, “Crack localisation and sizing in a beam based on the free and forced response measurements,” Mechanical Systems and Signal Processing, vol. 21, no. 3, pp. 1362–1385, 2007. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Xiang, Y. Zhong, X. Chen, and Z. He, “Crack detection in a shaft by combination of wavelet-based elements and genetic algorithm,” International Journal of Solids and Structures, vol. 45, no. 17, pp. 4782–4795, 2008. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  7. S. K. Singh and R. Tiwari, “Identification of a multi-crack in a shaft system using transverse frequency response functions,” Mechanism and Machine Theory, vol. 45, no. 12, pp. 1813–1827, 2010. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  8. P. Cawley and R. D. Adams, “The location of defects in structures from measurements of natural frequencies,” The Journal of Strain Analysis, vol. 14, no. 2, pp. 49–57, 1979. View at Publisher · View at Google Scholar · View at Scopus
  9. S. P. Lele and S. K. Maiti, “Modelling of transverse vibration of short beams for crack detection and measurement of crack extension,” Journal of Sound and Vibration, vol. 257, no. 3, pp. 559–583, 2002. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Zhao and H. DeSmidt, “Cracked shaft damage identification via symmetry breaking active magnetic bearing control and interrogation,” in Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE '11), vol. 1, pp. 75–82, August 2011.
  11. G. D. Gounaris and C. A. Papadopoulos, “Analytical and experimental crack identification of beam structures in air or in fluid,” Computers and Structures, vol. 65, no. 5, pp. 633–639, 1997. View at Publisher · View at Google Scholar · View at Scopus
  12. Y. Ishida, T. Ikeda, T. Yamamoto, and N. Masuda, “Vibrations of a rotating shaft containing a transverse crack. 1st Report. Variations of a resonance curve due to the angular position of an unbalance at the major critical speed,” Transactions of the Japan Society of Mechanical Engineers Series C, vol. 53, no. 488, pp. 925–932, 1987. View at Publisher · View at Google Scholar
  13. H. Y. Hwang and C. Kim, “Damage detection in structures using a few frequency response measurements,” Journal of Sound and Vibration, vol. 270, no. 1-2, pp. 1–14, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. A. K. Darpe, K. Gupta, and A. Chawla, “Transient response and breathing behaviour of a cracked Jeffcott rotor,” Journal of Sound and Vibration, vol. 272, no. 1-2, pp. 207–243, 2004. View at Publisher · View at Google Scholar · View at Scopus
  15. R. Gasch, “Dynamic behaviour of the Laval rotor with a transverse crack,” Mechanical Systems and Signal Processing, vol. 22, no. 4, pp. 790–804, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. R. Ramezanpour, M. Ghayour, and S. Ziaei-Rad, “Dynamic behavior of Jeffcott rotors with an arbitrary slant crack orientation on the shaft,” Applied and Computational Mechanics, vol. 6, no. 1, pp. 35–52, 2012. View at Google Scholar
  17. A. K. Darpe, “Dynamics of a Jeffcott rotor with slant crack,” Journal of Sound and Vibration, vol. 303, no. 1-2, pp. 1–28, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. J. Zhao and H. A. DeSmidt, “Sideband frequency response function based damage identification of rotor system with open cracks,” in Proceedings of the Health Monitoring of Structural and Biological Systems, vol. 9064 of Proceedings of SPIE, San Diego, Calif, USA, March 2014. View at Publisher · View at Google Scholar
  19. B. A. Finlayson, Gear's Method, Extra Material for Introduction to Chemical Engineering Computing, Wiley, 2nd edition, 2012.
  20. J. Zhao, H. A. DeSmidt, and W. Yao, “Nonlinear dynamics and health monitoring of 6-DOF breathing cracked Jeffcott rotor,” in Structural Health Monitoring and Inspection of Advanced Materials, Aerospace, and Civil Infrastructure, vol. 9437 of Proceedings of SPIE, San Diego, Calif, USA, April 2015. View at Publisher · View at Google Scholar
  21. A. K. Darpe, K. Gupta, and A. Chawla, “Coupled bending, longitudinal and torsional vibrations of a cracked rotor,” Journal of Sound and Vibration, vol. 269, no. 1-2, pp. 33–60, 2004. View at Publisher · View at Google Scholar · View at Scopus
  22. S. Y. Yoon, Z. Lin, and P. E. Allaire, Control of Surge in Centrifugal Compressors by Active Magnetic Bearings, Springer, 2012.