TY - JOUR A2 - Morinigo-Sotelo, Daniel AU - Li, Hui AU - Zhu, Mingwei AU - Xu, Zhuo AU - Wang, Zhuo AU - Wen, Bangchun PY - 2016 DA - 2016/01/05 TI - The Influence on Modal Parameters of Thin Cylindrical Shell under Bolt Looseness Boundary SP - 4709257 VL - 2016 AB - The influence on modal parameters of thin cylindrical shell (TCS) under bolt looseness boundary is investigated. Firstly, bolt looseness boundary of the shell is divided into two types, that is, different bolt looseness numbers and different bolt looseness levels, and natural frequencies and mode shapes are calculated by finite element method to roughly master vibration characteristics of TCS under these conditions. Then, the following measurements and identification techniques are used to get precise frequency, damping, and shape results; for example, noncontact laser Doppler vibrometer and vibration shaker with excitation level being precisely controlled are used in the test system; “preexperiment” is adopted to determine the required tightening torque and verify fixed constraint boundary; the small-segment FFT processing technique is employed to accurately measure nature frequency and laser rotating scanning technique is used to get shape results with high efficiency. Finally, based on the measured results obtained by the above techniques, the influence on modal parameters of TCS under two types of bolt looseness boundaries is analyzed and discussed. It can be found that bolt looseness boundary can significantly affect frequency and damping results which might be caused by changes of nonlinear stiffness and damping and in bolt looseness positions. SN - 1070-9622 UR - https://doi.org/10.1155/2016/4709257 DO - 10.1155/2016/4709257 JF - Shock and Vibration PB - Hindawi Publishing Corporation KW - ER -