Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016, Article ID 7598965, 10 pages
Research Article

Operational Modal Analysis Based on Subspace Algorithm with an Improved Stabilization Diagram Method

School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan 430070, China

Received 23 June 2015; Revised 2 November 2015; Accepted 3 November 2015

Academic Editor: Mickaël Lallart

Copyright © 2016 Shiqiang Qin et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [4 citations]

The following is the list of published articles that have cited the current article.

  • Li Yang, Young Hoon Kim, Jeffrey R. Hay, and John Kielkopf, “Non-Contact Based Structural Damage Detection Using Stochastic Subspace Identification and a FEM Updating Method,” Structures Congress 2017, pp. 483–494, . View at Publisher · View at Google Scholar
  • Ying Zhao, Jiahao Chen, Qiang Zhou, Xiaohan Jia, and Xueyuan Peng, “Numerical Simulation and Experimental Validation of the Vibration Modes for a Processing Reciprocating Compressor,” Shock and Vibration, vol. 2017, pp. 1–12, 2017. View at Publisher · View at Google Scholar
  • Vahid Yaghoubi, Majid K. Vakilzadeh, and Thomas J.S. Abrahamsson, “Automated modal parameter estimation using correlation analysis and bootstrap sampling,” Mechanical Systems and Signal Processing, vol. 100, pp. 289–310, 2018. View at Publisher · View at Google Scholar
  • Haotian Zhou, Kaiping Yu, Yushu Chen, Rui Zhao, and Yunhe Bai, “Time-Varying Modal Parameters Identification by Subspace Tracking Algorithm and Its Validation Method,” Shock and Vibration, vol. 2018, pp. 1–12, 2018. View at Publisher · View at Google Scholar