Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016, Article ID 7846369, 14 pages
http://dx.doi.org/10.1155/2016/7846369
Research Article

Influence of Sandwich-Type Constrained Layer Damper Design Parameters on Damping Strength

1Tecnun-University of Navarra, Manuel Lardizabal 13, 20018 San Sebastián, Spain
2CEIT, Manuel Lardizabal 15, 20018 San Sebastián, Spain
3CEIT and Tecnun-University of Navarra, Manuel Lardizabal 15, 20018 San Sebastián, Spain
4CAF, Jose Miguel Iturrioz 26, 20200 Beasain, Spain

Received 21 August 2015; Accepted 2 February 2016

Academic Editor: Emiliano Mucchi

Copyright © 2016 Inaki Merideno et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. Talotte, P.-E. Gautier, D. J. Thompson, and C. Hanson, “Identification, modelling and reduction potential of railway noise sources: a critical survey,” Journal of Sound and Vibration, vol. 267, no. 3, pp. 447–468, 2003. View at Publisher · View at Google Scholar · View at Scopus
  2. Working Group Railway Noise of the European Commission, Position Paper on the European Strategies and Priorities for Railway Noise Abatement, 2003.
  3. P. J. Remington, “Wheel/rail noise—part I: characterization of the wheel/rail dynamic system,” Journal of Sound and Vibration, vol. 46, no. 3, pp. 359–379, 1976. View at Publisher · View at Google Scholar · View at Scopus
  4. D. Thompson and C. Jones, “Noise and vibration from railway vehicles,” in Handbook of Railway Vehicle Dynamics, pp. 279–325, CRC Press, London, UK, 2006. View at Google Scholar
  5. M. J. Rudd, “Wheel/rail noise–part II: wheel squeal,” Journal of Sound and Vibration, vol. 46, no. 3, pp. 381–394, 1976. View at Publisher · View at Google Scholar · View at Scopus
  6. H. Sakamoto, “An analytical model for the natural frequencies of a railway wheel and comparison with experimental results,” Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, vol. 221, no. 3, pp. 391–398, 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. L. G. Kurzweil, “Wheel/rail noise—means for control,” Journal of Sound and Vibration, vol. 87, no. 2, pp. 197–220, 1983. View at Publisher · View at Google Scholar · View at Scopus
  8. P. Bouvet, N. Vincent, A. Coblentz, and F. Demilly, “Optimization of resilient wheels for rolling noise control,” Journal of Sound and Vibration, vol. 231, no. 3, pp. 765–777, 2000. View at Publisher · View at Google Scholar · View at Scopus
  9. C. J. C. Jones and D. J. Thompson, “Rolling noise generated by railway wheels with visco-elastic layers,” Journal of Sound and Vibration, vol. 231, no. 3, pp. 779–790, 2000. View at Publisher · View at Google Scholar · View at Scopus
  10. H. Claus and W. Schiehlen, “Dynamic stability and random vibrations of rigid and elastic wheelsets,” Nonlinear Dynamics, vol. 36, no. 2, pp. 299–311, 2004. View at Publisher · View at Google Scholar · View at Scopus
  11. J. F. Brunel, P. Dufrénoy, and F. Demilly, “Modelling of squeal noise attenuation of ring damped wheels,” Applied Acoustics, vol. 65, no. 5, pp. 457–471, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. J. F. Brunel, P. Dufrénoy, M. Naït, J. L. Muñoz, and F. Demilly, “Transient models for curve squeal noise,” Journal of Sound and Vibration, vol. 293, no. 3–5, pp. 758–765, 2006. View at Publisher · View at Google Scholar
  13. F. Létourneaux, J. Cordier, F. Poisson, and N. Douarche, “High speed railway noise: assessment of mitigation measures,” in Noise and Vibration Mitigation for Rail Transportation Systems, B. Schulte-Werning, D. Thompson, P.-E. Gautier et al., Eds., vol. 99 of Notes on Numerical Fluid Mechanics and Multidisciplinary Design, pp. 56–62, Springer, Berlin, Germany, 2008. View at Google Scholar
  14. J. Brunel, P. Dufrénoy, and F. Demilly, “Numerical approach for the attenuation of squeal noise of railway wheels in narrow curves,” in Proceedings of the 8th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM '09), Firenze, Italy, 2009.
  15. Construcciones y Auxiliar de Ferrocarriles S A (CAF), “2 130 952. Sistema de amortiguamiento de ruido en ruedas ferroviarias,” Patent 2 130 952, Gipuzkoa, Spain, 1999.
  16. I. López Arteaga, Theoretical and experimental analysis of ring-damped railway wheels [Ph.D. thesis], Tecnun—University of Navarra, San Sebastián, Spain, 1998.
  17. E. M. Austin and D. J. Inman, “Some pitfalls of simplified modeling for viscoelastic sandwich beams,” Journal of Vibration and Acoustics, vol. 122, no. 4, pp. 434–439, 2000. View at Publisher · View at Google Scholar · View at Scopus
  18. P. Y. H. Huang, P. G. Reinhall, I. Y. Shen, and J. M. Yellin, “Thickness deformation of constrained layer damping: an experimental and theoretical evaluation,” Journal of Vibration and Acoustics, vol. 123, no. 2, pp. 213–221, 2001. View at Publisher · View at Google Scholar · View at Scopus
  19. M. Guerich and S. Assaf, “Optimization of noise transmission through sandwich structures,” Journal of Vibration and Acoustics, vol. 135, no. 5, Article ID 051010, 13 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  20. L. Zheng, Q. Qiu, H. Wan, and D. Zhang, “Damping analysis of multilayer passive constrained layer damping on cylindrical shell using transfer function method,” Journal of Vibration and Acoustics, vol. 136, Article ID 031001, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. S. Cervello, G. Donzella, A. Pola, and M. Scepi, “Analysis and design of a low-noise railway wheel,” Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, vol. 215, no. 3, pp. 179–192, 2001. View at Publisher · View at Google Scholar · View at Scopus
  22. A. Bracciali, “Damped wheels as an efficient measure to reduce railway noise,” in Proceedings of the 5th European Conference on Noise Control (Euronoise 2003), Naples, Italy, May 2003.
  23. I. López, J. M. Busturia, and H. Nijmeijer, “Energy dissipation of a friction damper,” Journal of Sound and Vibration, vol. 278, no. 3, pp. 539–561, 2004. View at Publisher · View at Google Scholar · View at Scopus
  24. J. C. O. Nielsen and C. R. Fredö, “Multi-disciplinary optimization of railway wheels,” Journal of Sound and Vibration, vol. 293, no. 3–5, pp. 510–521, 2006. View at Publisher · View at Google Scholar · View at Scopus
  25. A. Bracciali, S. Cervello, and P. Gatti, “Acoustic effectiveness of damped wheels and impact on life-cycle cost of different typologies of passenger trains,” in Noise and Vibration Mitigation for Rail Transportation Systems, B. Schulte-Werning, D. Thompson, P.-E. Gautier et al., Eds., vol. 99 of Notes on Numerical Fluid Mechanics and Multidisciplinary Design, pp. 257–263, Springer, Berlin, Germany, 2008. View at Publisher · View at Google Scholar
  26. J. Färm, “Evaluation of wheel dampers on an intercity train,” Journal of Sound and Vibration, vol. 267, no. 3, pp. 739–747, 2003, Proceedings of the 7th International Workshop on Railway Noise. View at Publisher · View at Google Scholar
  27. S. Cervello and F. Lombardo, “Development of a modular damping system against wheel noise emission for freight and urban transport vehicles,” in Proceedings of the 56th UITP World Congress, International Association of Public Transport, Rome, Italy, June 2005.
  28. Z. Wang, Z. B. Chen, and M. Z. Li, “Added viscoelastic wheel dampers for reducing railway noise,” in Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE '08), vol. 11, pp. 461–471, Boston, Mass, USA, November 2008. View at Publisher · View at Google Scholar · View at Scopus
  29. I. Merideno, J. Nieto, N. Gil-Negrete, A. Landaberea, and J. Iartza, “Constrained layer damper modelling and performance evaluation for eliminating squeal noise in trams,” Shock and Vibration, vol. 2014, Article ID 473720, 11 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  30. I. Merideno, J. Nieto, N. Gil-Negrete, J. G. G. Ortiz, A. Landaberea, and J. Iartza, “Theoretical prediction of the damping of a railway wheel with sandwich-type dampers,” Journal of Sound and Vibration, vol. 333, no. 20, pp. 4897–4911, 2014. View at Publisher · View at Google Scholar · View at Scopus
  31. I. Merideno, J. Nieto, N. Gil-Negrete, J. G. Gimenez, A. Landaberea, and J. Iartza, “Numerical characterization of railway wheels with sandwich-type damping solutions,” in Proceedings of the International Conference on Noise and Vibration Engineering (ISMA '14), P. Sas, D. Moens, and H. Denayer, Eds., KU Leuven—Departement Werktuigkunde, Leuven, Belgium, September 2014.
  32. D. J. Thompson and C. J. C. Jones, “Review of the modelling of wheel/rail noise generation,” Journal of Sound and Vibration, vol. 231, no. 3, pp. 519–536, 2000. View at Publisher · View at Google Scholar · View at Scopus
  33. I. Merideno, J. Nieto, N. Gil-Negrete, A. Landaberea, and J. Iartza, “Numerical vibro-acoustic analysis of railway wheels with and without damping solutions,” Noise Control Engineering Journal, vol. 60, no. 4, pp. 458–472, 2012. View at Publisher · View at Google Scholar · View at Scopus
  34. P. B. Lindley, Engineering Design with Natural Rubber, Natural Rubber Producers' Research Association, London, UK, 1970.
  35. A. D. Nashif, D. I. G. Jones, and J. P. Henderson, Vibration Damping, John Wiley & Sons, New York, NY, USA, 1985.
  36. D. I. G. Jones, Handbook of Viscoelastic Vibration Damping, John Wiley & Sons, New York, NY, USA, 2001.