Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016 (2016), Article ID 7956189, 13 pages
http://dx.doi.org/10.1155/2016/7956189
Research Article

Experimental Study on Progressive Collapse Performance of Frame with Specially Shaped Columns Subjected to Middle Column Removal

1School of Civil Engineering, Tianjin University, Tianjin 300072, China
2Key Laboratory of Coast Civil Structure Safety, Tianjin University, Ministry of Education, Tianjin 300072, China

Received 13 May 2015; Revised 27 August 2015; Accepted 31 August 2015

Academic Editor: Gilbert-Rainer Gillich

Copyright © 2016 Tiecheng Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. ASCE, Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers, Reston, Va, USA, 2006.
  2. P. Kotsovinos and A. Usmani, “The World Trade Center 9/11 disaster and progressive collapse of tall buildings,” Fire Technology, vol. 49, no. 3, pp. 741–765, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. GSA, Progressive Collapse Analysis and Design Guidelines for New Federal Office Buildings and Major Modernization Projects, US General Service Administration, Washington, DC, USA, 2003.
  4. European Committee for Standardization, EN 1991-1-7:2006, Eurocode 1: Actions on Structures. Part 1–7: General Actions—Accidental Actions, European Committee for Standardization, Brussels, Belgium, 2006.
  5. Office of the Deputy Prime Minister, BS 5950-1. The Building Regulations 2000: Part-A: Schedule 1: A3, Disproportionate Collapse, Office of the Deputy Prime Minister, London, UK, 2004.
  6. M. Sasani and J. Kropelnicki, “Progressive collapse analysis of an RC structure,” The Structural Design of Tall and Special Buildings, vol. 17, no. 4, pp. 757–771, 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Sasani, M. Bazan, and S. Sagiroglu, “Experimental and analytical progressive collapse evaluation of actual reinforced concrete structure,” ACI Structural Journal, vol. 104, no. 6, pp. 731–739, 2007. View at Google Scholar · View at Scopus
  8. W.-J. Yi, Q.-F. He, Y. Xiao, and S. K. Kunnath, “Experimental study on progressive collapse-resistant behavior of reinforced concrete frame structures,” ACI Structural Journal, vol. 105, no. 4, pp. 433–439, 2008. View at Google Scholar · View at Scopus
  9. J. Kim and J. Yu, “Analysis of reinforced concrete frames subjected to column loss,” Magazine of Concrete Research, vol. 64, no. 1, pp. 21–33, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. Y. Su, Y. Tian, and X. Song, “Progressive collapse resistance of axially-restrained frame beams,” ACI Structural Journal, vol. 106, no. 5, pp. 600–607, 2009. View at Google Scholar · View at Scopus
  11. J. Yu and K.-H. Tan, “Experimental and numerical investigation on progressive collapse resistance of reinforced concrete beam column sub-assemblages,” Engineering Structures, vol. 55, pp. 90–106, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. S. L. Yap and B. Li, “Experimental investigation of reinforced concrete exterior beam-column subassemblages for progressive collapse,” ACI Structural Journal, vol. 108, no. 5, pp. 542–552, 2011. View at Google Scholar · View at Scopus
  13. T.-C. Wang and X.-H. Zhang, “Frame property of unequal storey height with specially shaped columns under cyclic loading,” Journal of Central South University of Technology, vol. 17, no. 6, pp. 1364–1369, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. T. Wang, X. Liu, and H. Zhao, “Experimental study of the seismic performance of L-shaped columns with 500 MPa steel bars,” The Scientific World Journal, vol. 2014, Article ID 105826, 11 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. GB 50010-2010. Code for Design of Concrete Structures, China Architecture & Building Press, Beijing, China, 2010, (Chinese).
  16. JGJ, “Technical specification for concrete structures with specially shaped columns,” JGJ 149-2006, China Architecture & Building Press, Beijing, China, 2006 (Chinese).
  17. T. Wang, Q. Chen, H. Zhao, and L. Zhang, “Investigation on dynamic effects of frame with specially shaped columns subjected to column failure,” Journal of Vibroengineering, vol. 17, no. 5, pp. 2455–2470, 2015. View at Google Scholar
  18. F. McKenna, G. L. Fenves, and M. H. Scott, Open System for Earthquake Engineering Simulation, University of California, Berkeley, Calif, USA, 2000.
  19. B. D. Scott, R. Park, and M. Priestley, “Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates,” ACI Journal Proceedings, vol. 79, no. 1, pp. 13–27, 1982. View at Google Scholar
  20. Y. Bao, H. S. Lew, and S. K. Kunnath, “Modeling of reinforced concrete assemblies under column-removal scenario,” Journal of Structural Engineering, vol. 140, no. 1, Article ID 04013026, 2014. View at Publisher · View at Google Scholar · View at Scopus