Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2016 (2016), Article ID 8729572, 11 pages
http://dx.doi.org/10.1155/2016/8729572
Research Article

Automated Bearing Fault Diagnosis Using 2D Analysis of Vibration Acceleration Signals under Variable Speed Conditions

School of Electrical, Electronics and Computer Engineering, University of Ulsan, Building No. 7, Room No. 308, 93 Daehak-ro, Nam-gu, Ulsan 680-749, Republic of Korea

Received 2 September 2016; Accepted 17 November 2016

Academic Editor: Minvydas Ragulskis

Copyright © 2016 Sheraz Ali Khan and Jong-Myon Kim. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Saidur, “A review on electrical motors energy use and energy savings,” Renewable and Sustainable Energy Reviews, vol. 14, no. 3, pp. 877–898, 2010. View at Publisher · View at Google Scholar · View at Scopus
  2. I. El-Thalji and E. Jantunen, “Dynamic modelling of wear evolution in rolling bearings,” Tribology International, vol. 84, pp. 90–99, 2015. View at Publisher · View at Google Scholar · View at Scopus
  3. O. V. Thorsen and M. Dalva, “Failure identification and analysis for high-voltage induction motors in the petrochemical industry,” IEEE Transactions on Industry Applications, vol. 35, no. 4, pp. 810–818, 1999. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Sheng, Report on Wind Turbine Subsystem Reliability—A Survey of Various Databases, National Renewable Energy Laboratory, 2013.
  5. W. Qiao and D. Lu, “A survey on wind turbine condition monitoring and fault diagnosis—part I: components and subsystems,” IEEE Transactions on Industrial Electronics, vol. 62, no. 10, pp. 6536–6545, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. P. Bangalore and L. B. Tjernberg, “An artificial neural network approach for early fault detection of gearbox bearings,” IEEE Transactions on Smart Grid, vol. 6, no. 2, pp. 980–987, 2015. View at Publisher · View at Google Scholar · View at Scopus
  7. X. Gong and W. Qiao, “Bearing fault diagnosis for direct-drive wind turbines via current-demodulated signals,” IEEE Transactions on Industrial Electronics, vol. 60, no. 8, pp. 3419–3428, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. X. Gong and W. Qiao, “Current-based mechanical fault detection for direct-drive wind turbines via synchronous sampling and impulse detection,” IEEE Transactions on Industrial Electronics, vol. 62, no. 3, pp. 1693–1702, 2015. View at Publisher · View at Google Scholar · View at Scopus
  9. D. Siegel, C. Ly, and J. Lee, “Methodology and framework for predicting helicopter rolling element bearing failure,” IEEE Transactions on Reliability, vol. 61, no. 4, pp. 846–857, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Feldman, B. M. Hanrahan, S. Misra et al., “Vibration-based diagnostics for rotary MEMS,” Journal of Microelectromechanical Systems, vol. 24, no. 2, pp. 289–299, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. D. Hansen and A. H. Olsson, ISO Standard 13373-1: 2002—Condition Monitoring and Diagnostics of Machines—Vibration Condition Monitoring—Part 1: General Procedures, International Standards Organization, 2002.
  12. D. Hansen and A. H. Olsson, “ISO Standard 13373-2: 2005: condition monitoring and diagnostics of machines-vibration condition monitoring-part 2: processing, analysis and presentation of vibration data,” International Standards Organization, 2009. View at Google Scholar
  13. Z. Gao, C. Cecati, and S. X. Ding, “A survey of fault diagnosis and fault-tolerant techniques—Part II: fault diagnosis with knowledge-based and hybrid/active approaches,” IEEE Transactions on Industrial Electronics, vol. 62, no. 6, pp. 3768–3774, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. Z. Gao, C. Cecati, and S. X. Ding, “A survey of fault diagnosis and fault-tolerant techniques—part I: fault diagnosis with model-based and signal-based approaches,” IEEE Transactions on Industrial Electronics, vol. 62, no. 6, pp. 3757–3767, 2015. View at Publisher · View at Google Scholar · View at Scopus
  15. T. W. Rauber, F. de Assis Boldt, and F. M. Varejão, “Heterogeneous feature models and feature selection applied to bearing fault diagnosis,” IEEE Transactions on Industrial Electronics, vol. 62, no. 1, pp. 637–646, 2015. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Amar, I. Gondal, and C. Wilson, “Vibration spectrum imaging: a novel bearing fault classification approach,” IEEE Transactions on Industrial Electronics, vol. 62, no. 1, pp. 494–502, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. J. Seshadrinath, B. Singh, and B. K. Panigrahi, “Investigation of vibration signatures for multiple fault diagnosis in variable frequency drives using complex wavelets,” IEEE Transactions on Power Electronics, vol. 29, no. 2, pp. 936–945, 2014. View at Publisher · View at Google Scholar · View at Scopus
  18. B. Eftekharnejad, M. R. Carrasco, B. Charnley, and D. Mba, “The application of spectral kurtosis on Acoustic Emission and vibrations from a defective bearing,” Mechanical Systems and Signal Processing, vol. 25, no. 1, pp. 266–284, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. M. Kang, J. Kim, B. Choi, and J.-M. Kim, “Envelope analysis with a genetic algorithm-based adaptive filter bank for bearing fault detection,” The Journal of the Acoustical Society of America, vol. 138, no. 1, pp. EL65–EL70, 2015. View at Publisher · View at Google Scholar
  20. M. Kang, J. Kim, and J.-M. Kim, “Reliable fault diagnosis for incipient low-speed bearings using fault feature analysis based on a binary bat algorithm,” Information Sciences, vol. 294, pp. 423–438, 2015. View at Publisher · View at Google Scholar · View at MathSciNet
  21. M. Kang, J. Kim, and J.-M. Kim, “An FPGA-based multicore system for real-time bearing fault diagnosis using ultrasampling rate AE signals,” IEEE Transactions on Industrial Electronics, vol. 62, no. 4, pp. 2319–2329, 2015. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Kang, J. Kim, and J.-M. Kim, “High-performance and energy-efficient fault diagnosis using effective envelope analysis and denoising on a general-purpose graphics processing unit,” IEEE Transactions on Power Electronics, vol. 30, no. 5, pp. 2763–2776, 2015. View at Publisher · View at Google Scholar · View at Scopus
  23. M. Kang, J. Kim, J.-M. Kim, A. C. C. Tan, E. Y. Kim, and B.-K. Choi, “Reliable fault diagnosis for low-speed bearings using individually trained support vector machines with kernel discriminative feature analysis,” IEEE Transactions on Power Electronics, vol. 30, no. 5, pp. 2786–2797, 2015. View at Publisher · View at Google Scholar · View at Scopus
  24. R. Islam, S. A. Khan, and J.-M. Kim, “Discriminant feature distribution analysis-based hybrid feature selection for online bearing fault diagnosis in induction motors,” Journal of Sensors, vol. 2016, Article ID 7145715, 16 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  25. P. H. Nguyen and J.-M. Kim, “Multifault diagnosis of rolling element bearings using a wavelet kurtogram and vector median-based feature analysis,” Shock and Vibration, vol. 2015, Article ID 320508, 14 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  26. M. Hamadache, D. Lee, and K. C. Veluvolu, “Rotor speed-based bearing fault diagnosis (RSB-BFD) under variable speed and constant load,” IEEE Transactions on Industrial Electronics, vol. 62, no. 10, pp. 6486–6495, 2015. View at Publisher · View at Google Scholar · View at Scopus
  27. D. Wang, P. W. Tse, and K. L. Tsui, “An enhanced Kurtogram method for fault diagnosis of rolling element bearings,” Mechanical Systems and Signal Processing, vol. 35, no. 1-2, pp. 176–199, 2013. View at Publisher · View at Google Scholar · View at Scopus
  28. M. Pineda-Sanchez, J. Perez-Cruz, J. Roger-Folch, M. Riera-Guasp, A. Sapena-Bano, and R. Puche-Panadero, “Diagnosis of induction motor faults using a DSP and advanced demodulation techniques,” in Proceedings of the 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED '13), pp. 69–76, Valencia, Spain, August 2013. View at Publisher · View at Google Scholar · View at Scopus
  29. R. B. Randall and J. Antoni, “Rolling element bearing diagnostics—a tutorial,” Mechanical Systems and Signal Processing, vol. 25, no. 2, pp. 485–520, 2011. View at Publisher · View at Google Scholar · View at Scopus
  30. I. Bediaga, X. Mendizabal, A. Arnaiz, and J. Munoa, “Ball bearing damage detection using traditional signal processing algorithms,” IEEE Instrumentation and Measurement Magazine, vol. 16, no. 2, pp. 20–25, 2013. View at Publisher · View at Google Scholar · View at Scopus
  31. P. K. Kankar, S. C. Sharma, and S. P. Harsha, “Fault diagnosis of rolling element bearing using cyclic autocorrelation and wavelet transform,” Neurocomputing, vol. 110, pp. 9–17, 2013. View at Publisher · View at Google Scholar · View at Scopus
  32. J. Rafiee, M. A. Rafiee, and P. W. Tse, “Application of mother wavelet functions for automatic gear and bearing fault diagnosis,” Expert Systems with Applications, vol. 37, no. 6, pp. 4568–4579, 2010. View at Publisher · View at Google Scholar · View at Scopus
  33. E. Cabal-Yepez, A. G. Garcia-Ramirez, R. J. Romero-Troncoso, A. Garcia-Perez, and R. A. Osornio-Rios, “Reconfigurable monitoring system for time-frequency analysis on industrial equipment through STFT and DWT,” IEEE Transactions on Industrial Informatics, vol. 9, no. 2, pp. 760–771, 2013. View at Publisher · View at Google Scholar · View at Scopus
  34. S. Nandi, T. C. Ilamparithi, S. B. Lee, and D. Hyun, “Detection of eccentricity faults in induction machines based on nameplate parameters,” IEEE Transactions on Industrial Electronics, vol. 58, no. 5, pp. 1673–1683, 2011. View at Publisher · View at Google Scholar · View at Scopus
  35. Y. Lei, J. Lin, Z. He, and M. J. Zuo, “A review on empirical mode decomposition in fault diagnosis of rotating machinery,” Mechanical Systems and Signal Processing, vol. 35, no. 1-2, pp. 108–126, 2013. View at Publisher · View at Google Scholar · View at Scopus
  36. J. Zheng, J. Cheng, and Y. Yang, “Generalized empirical mode decomposition and its applications to rolling element bearing fault diagnosis,” Mechanical Systems and Signal Processing, vol. 40, no. 1, pp. 136–153, 2013. View at Publisher · View at Google Scholar · View at Scopus
  37. X. Zhang and J. Zhou, “Multi-fault diagnosis for rolling element bearings based on ensemble empirical mode decomposition and optimized support vector machines,” Mechanical Systems and Signal Processing, vol. 41, no. 1-2, pp. 127–140, 2013. View at Publisher · View at Google Scholar · View at Scopus
  38. G. F. Bin, J. J. Gao, X. J. Li, and B. S. Dhillon, “Early fault diagnosis of rotating machinery based on wavelet packets—empirical mode decomposition feature extraction and neural network,” Mechanical Systems and Signal Processing, vol. 27, pp. 696–711, 2012. View at Publisher · View at Google Scholar · View at Scopus
  39. M. Kang, J. Kim, L. M. Wills, and J.-M. Kim, “Time-varying and multiresolution envelope analysis and discriminative feature analysis for bearing fault diagnosis,” IEEE Transactions on Industrial Electronics, vol. 62, no. 12, pp. 7749–7761, 2015. View at Publisher · View at Google Scholar · View at Scopus
  40. D. Zhao, J. Li, and W. Cheng, “Feature extraction of faulty rolling element bearing under variable rotational speed and gear interferences conditions,” Shock and Vibration, vol. 2015, Article ID 425989, 9 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  41. Case Western Reserve University, “Seeded Fault Test Data,” http://csegroups.case.edu/bearingdatacenter/home.
  42. T. Ojala, M. Pietikäinen, and T. Mäenpää, “Multiresolution gray-scale and rotation invariant texture classification with local binary patterns,” IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 24, no. 7, pp. 971–987, 2002. View at Publisher · View at Google Scholar · View at Scopus
  43. S. Brahnam, L. C. Jain, L. Nanni, and A. Lumini, Local Binary Patterns: New Variants and Applications, Springer, 2014.
  44. M. R. Shahriar, T. Ahsan, and U. Chong, “Fault diagnosis of induction motors utilizing local binary pattern-based texture analysis,” EURASIP Journal on Image and Video Processing, vol. 2013, article 29, 2013. View at Publisher · View at Google Scholar
  45. D. H. Pandya, S. H. Upadhyay, and S. P. Harsha, “Fault diagnosis of rolling element bearing with intrinsic mode function of acoustic emission data using APF-KNN,” Expert Systems with Applications, vol. 40, no. 10, pp. 4137–4145, 2013. View at Publisher · View at Google Scholar · View at Scopus