Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2017, Article ID 1402301, 15 pages
https://doi.org/10.1155/2017/1402301
Research Article

Study on the Stiffness Correction Method of Novel Antivibration Bearing for Urban Rail Transit Viaduct

1Hubei Key Laboratory of Roadway Bridge & Structure Engineering, Wuhan University of Technology, Wuhan 430070, China
2School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan 430070, China
3Wuhan Hirun Engineering Equipment Co., Ltd., Wuhan 430084, China

Correspondence should be addressed to Liangming Sun; moc.621@gnimgnailnus

Received 30 April 2017; Revised 20 July 2017; Accepted 29 August 2017; Published 18 October 2017

Academic Editor: Lutz Auersch

Copyright © 2017 Weiping Xie et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Yokoshima and A. Tamura, “A study on factors constituting annoyance due to Shinkansen railway vibration,” Journal of Architecture, Planning and Environmental Engineering, vol. 64, no. 526, pp. 1–7, 1999. View at Publisher · View at Google Scholar
  2. S. Lakušić and M. Ahac, “Rail traffic noise and vibration mitigation measures in urban areas,” Technical Gazette, vol. 19, no. 2, pp. 427–435, 2012. View at Google Scholar · View at Scopus
  3. G. Lombaert, G. Degrande, B. Vanhauwere, B. Vandeborght, and S. François, “The control of ground-borne vibrations from railway traffic by means of continuous floating slabs,” Journal of Sound and Vibration, vol. 297, no. 3-5, pp. 946–961, 2006. View at Publisher · View at Google Scholar · View at Scopus
  4. J. F. Wang, C. C. Lin, and B. L. Chen, “Vibration suppression for high-speed railway bridges using tuned mass dampers,” International Journal of Solids and Structures, vol. 40, no. 2, pp. 465–491, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. M. D. Martínez-Rodrigo, J. Lavado, and P. Museros, “Dynamic performance of existing high-speed railway bridges under resonant conditions retrofitted with fluid viscous dampers,” Engineering Structures, vol. 32, no. 3, pp. 808–828, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. L. Andersen and S. R. K. Nielsen, “Reduction of ground vibration by means of barriers or soil improvement along a railway track,” Soil Dynamics and Earthquake Engineering, vol. 25, no. 7–10, pp. 701–716, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Adam and O. Von Estorff, “Reduction of train-induced building vibrations by using open and filled trenches,” Computers and Structures, vol. 83, no. 1, pp. 11–24, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. J. Avilés and F. J. Sánchez-Sesma, “Foundation isolation from vibrations using piles as barriers,” Journal of Engineering Mechanics, vol. 114, no. 11, pp. 1854–1870, 1988. View at Publisher · View at Google Scholar · View at Scopus
  9. G. Y. Gao, Z. Y. Li, C. Qiu, and Z. Q. Yue, “Three-dimensional analysis of rows of piles as passive barriers for ground vibration isolation,” Soil Dynamics and Earthquake Engineering, vol. 26, no. 11, pp. 1015–1027, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. P.-H. Tsai, Z.-Y. Feng, and T.-I. Jen, “Three-dimensional analysis of the screening effectiveness of hollow pile barriers for foundation-induced vertical vibration,” Computers and Geotechnics, vol. 35, no. 3, pp. 489–499, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. H. Takemiya and A. Fujiwara, “Wave propagation/impediment in a stratum and wave impeding block (WIB) measured for SSI response reduction,” Soil Dynamics and Earthquake Engineering, vol. 13, no. 1, pp. 49–61, 1994. View at Publisher · View at Google Scholar · View at Scopus
  12. H. Takemiya, “Field vibration mitigation by honeycomb WIB for pile foundations of a high-speed train viaduct,” Soil Dynamics and Earthquake Engineering, vol. 24, no. 1, pp. 69–87, 2004. View at Publisher · View at Google Scholar · View at Scopus
  13. T. H. Kim, Y. J. Kim, and H. M. Shin, “Seismic performance assessment of reinforced concrete bridge piers supported by laminated rubber bearings,” Structural Engineering and Mechanics, vol. 29, no. 3, pp. 259–278, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. A. R. Bhuiyan and M. S. Alam, “Seismic performance assessment of highway bridges equipped with superelastic shape memory alloy-based laminated rubber isolation bearing,” Engineering Structures, vol. 49, no. 2, pp. 396–407, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. H. Zhang, J. Li, and T. Peng, “Development and mechanical performance of a new kind of bridge seismic isolator for low seismic regions,” Shock and Vibration, vol. 20, no. 4, pp. 725–735, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. Marioni, L. Chen, and J. T. Hu, “Application of EBP on Taiwan high-speed railway,” Earthquake Resistant Engineering and Retrofitting, vol. 33, no. 2, pp. 63–66, 2011. View at Publisher · View at Google Scholar
  17. X. Y. Hu and G. Z. Yu, “Brief discussion about bridge vibration isolation bearing products,” in Proceedings of the fifth nationwide rubber products technical seminar, Rubber cup in Donghai, pp. 79–84, Ningbo, China, 2009.
  18. L. M. Sun, W. P. Xie, and W. He, “Field measurement on vibration reduction effects of anti-vibration bearings for vertical train-induced vibrations,” in Proceedings of the Fourteenth International Symposium on Structural Engineering, Fundamental Research in Structural Engineering: Retrospective and Prospective, pp. 982–988, Beijing, China, 2016.
  19. Z. J. Zhang, X. Z. Li, X. Zhang et al., “Study on the vibration isolation effects of elastic bearings on train-induced vibration of railway bridge,” Engineering Mechanics, vol. 32, no. 4, pp. 103–111, 2015. View at Publisher · View at Google Scholar · View at Scopus
  20. X. Li, Z. Zhang, and X. Zhang, “Using elastic bridge bearings to reduce train-induced ground vibrations: An experimental and numerical study,” Soil Dynamics and Earthquake Engineering, vol. 85, pp. 78–90, 2016. View at Publisher · View at Google Scholar · View at Scopus
  21. M. Kawatani, Y. Kobayashi, and H. Kawaki, “Influence of elastomeric bearings on traffic-induced vibration of highway bridges,” Transportation Research Record: Journal of the Transportation Research Board, vol. 1696, pp. 76–82, 2000. View at Google Scholar · View at Scopus
  22. C.-W. Kim, M. Kawatani, and W.-S. Hwang, “Reduction of traffic-induced vibration of two-girder steel bridge seated on elastomeric bearings,” Engineering Structures, vol. 26, no. 14, pp. 2185–2195, 2004. View at Publisher · View at Google Scholar · View at Scopus
  23. J.-D. Yau, Y.-S. Wu, and Y.-B. Yang, “Impact response of bridges with elastic bearings to moving loads,” Journal of Sound and Vibration, vol. 248, no. 1, pp. 9–30, 2001. View at Publisher · View at Google Scholar · View at Scopus
  24. Y. B. Yang, C. L. Lin, J. D. Yau, and D. W. Chang, “Mechanism of resonance and cancellation for train-induced vibrations on bridges with elastic bearings,” Journal of Sound and Vibration, vol. 269, no. 1-2, pp. 345–360, 2004. View at Publisher · View at Google Scholar · View at Scopus
  25. T. Jiang, C. Y. Ma, and X. Zhang, “Dynamic analysis of train-bridge system with elastic supports,” Chinese Quarterly of Mechanics, vol. 25, no. 2, pp. 256–263, 2004. View at Google Scholar
  26. S. Yabana and A. Matsuda, “Mechanical properties of laminated rubber bearings for three-dimensional seismic isolation,” in Proceedings of the 12th World Conference on Earthquake Engineering, 2000.
  27. W. F. He, W. G. Liu, Y. F. Yang et al., “The basic mechanical properties of thick rubber isolators,” Journal of PLA University of Science and Technology (Natural Science Edition), vol. 12, no. 3, pp. 258–263, 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. R. Clough and J. Penzien, Structural of Dynamics, Computers & Structures, Inc., USA, 3rd edition, 1995.
  29. GB 20688.2-2006, Rubber Bearings-Part 2: Elastomeric seismic-protection isolators for bridges, China Standards Press, Beijing, China, 2006.
  30. EN 15129-2009, Anti-seismic devices, 2009.
  31. GB/T 20688.1-2007, Rubber Bearings-Part 1: Seismic-protection isolators test methods, China Standards Press, Beijing, China, 2006.
  32. GB 10071-1988, Measurement Method of Environmental Vibration of Urban Area, National Environmental Protection Agency, China, 1988.
  33. ISO 2631/1-1997, Mechanical Vibration and Shock: Evaluation of Human Exposure to Whole-Body Vibration-Part 1: General Requirements, 1997.
  34. X. Z. Li, Q. M. Liu, X. Zhang et al., “Ground vibration induced by inter-city express train,” Journal of Vibration and Shock, vol. 33, no. 16, pp. 56–61, 2014. View at Google Scholar