Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2017, Article ID 2736545, 13 pages
https://doi.org/10.1155/2017/2736545
Research Article

Dynamic Optimization of Constrained Layer Damping Structure for the Headstock of Machine Tools with Modal Strain Energy Method

1Key Laboratory of Mechanism Theory and Equipment Design, Ministry of Education, Tianjin University, Tianjin 300072, China
2School of Electrical Engineering and Automation, East China Jiaotong University, Nanchang 330013, China
3School of Engineering, University of Warwick, Coventry CV4 7AL, UK
4Shenji Group Kunming Machine Tool Company Limited, Kunming 650203, China

Correspondence should be addressed to Weiguo Gao; nc.ude.ujt@gwoag

Received 3 November 2016; Accepted 31 January 2017; Published 22 February 2017

Academic Editor: Sergio De Rosa

Copyright © 2017 Yakai Xu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J.-H. Kim and S.-H. Chang, “Design of μ-CNC machining centre with carbon/epoxy composite–aluminium hybrid structures containing friction layers for high damping capacity,” Composite Structures, vol. 92, no. 9, pp. 2128–2136, 2010. View at Publisher · View at Google Scholar · View at Scopus
  2. A. Rashid and C. M. Nicolescu, “Design and implementation of tuned viscoelastic dampers for vibration control in milling,” International Journal of Machine Tools & Manufacture, vol. 48, no. 9, pp. 1036–1053, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. S. H. Chang, P. J. Kim, D. G. Lee, and J. K. Choi, “Steel-composite hybrid headstock for high-precision grinding machines,” Composite Structures, vol. 53, no. 1, pp. 1–8, 2001. View at Publisher · View at Google Scholar · View at Scopus
  4. D. G. Lee, S. H. Chang, and H. S. Kim, “Damping improvement of machine tool columns with polymer matrix fiber composite material,” Composite Structures, vol. 43, no. 2, pp. 155–163, 1998. View at Publisher · View at Google Scholar · View at Scopus
  5. F. P. Wardle, S. J. Lacey, and S. Y. Poon, “Dynamic and static characteristics of a wide speed range machine tool spindle,” Precision Engineering, vol. 5, no. 4, pp. 175–183, 1983. View at Publisher · View at Google Scholar · View at Scopus
  6. E. M. Kerwin, “Damping of flexural waves by a constrained viscoelastic layer,” Journal of the Acoustical Society of America, vol. 31, no. 7, pp. 952–962, 1959. View at Publisher · View at Google Scholar · View at Scopus
  7. R. Ross, E. E. Ungar, and E. M. Kerwin, “Damping of plate of flexural vibrations by means of viscoelastic laminate,” in Proceedings of the Structural Damping—A Colloquium on Structural Damping Held at the ASME Annual Meeting, pp. 49–88, 1959.
  8. D. J. Mead and S. Markus, “The forced vibration of a three-layer, damped sandwich beam with arbitrary boundary conditions,” Journal of Sound and Vibration, vol. 10, no. 2, pp. 163–175, 1969. View at Publisher · View at Google Scholar · View at Scopus
  9. C. D. Johnson and D. A. Kienholz, “Finite element prediction of damping in structures with constrained viscoelastic layers,” AIAA journal, vol. 20, no. 9, pp. 1284–1290, 1982. View at Publisher · View at Google Scholar · View at Scopus
  10. A. K. Lall, N. T. Asnani, and B. C. Nakra, “Vibration and damping analysis of rectangular plate with partially covered constrained viscoelastic layer,” Journal of vibration, acoustics, stress, and reliability in design, vol. 109, no. 3, pp. 241–247, 1987. View at Publisher · View at Google Scholar · View at Scopus
  11. A. K. Lall, N. T. Asnani, and B. C. Nakra, “Damping analysis of partially covered sandwich beams,” Journal of Sound and Vibration, vol. 123, no. 2, pp. 247–259, 1988. View at Publisher · View at Google Scholar · View at Scopus
  12. J.-L. Marcelin, S. Shakhesi, and F. Pourroy, “Optimal constrained layer damping of beams: experimental and numerical studies,” Shock & Vibration, vol. 2, no. 6, pp. 445–450, 1995. View at Publisher · View at Google Scholar · View at Scopus
  13. M. Alvelid, “Optimal position and shape of applied damping material,” Journal of Sound and Vibration, vol. 310, no. 4-5, pp. 947–965, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. G. Lepoittevin and G. Kress, “Optimization of segmented constrained layer damping with mathematical programming using strain energy analysis and modal data,” Materials and Design, vol. 31, no. 1, pp. 14–24, 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. Z. Z. Guo, Y. Z. Chen, K. W. Deng, and Q. Hou, “Study on topological optimization design of constrained damping plate based on evolutionary structural optimization,” Journal of Machine Design, vol. 23, no. 10, pp. 3–5, 2006. View at Google Scholar
  16. Z. Fang and L. Zheng, “Topology optimization for minimizing the resonant response of plates with constrained layer damping treatment,” Shock and Vibration, vol. 2015, Article ID 376854, 11 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. S. Y. Kim, C. K. Mechefske, and I. Y. Kim, “Optimal damping layout in a shell structure using topology optimization,” Journal of Sound and Vibration, vol. 332, no. 12, pp. 2873–2883, 2013. View at Publisher · View at Google Scholar · View at Scopus