Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2017, Article ID 3648403, 11 pages
Research Article

Static and Dynamic Strain Monitoring of Reinforced Concrete Components through Embedded Carbon Nanotube Cement-Based Sensors

1Department of Civil and Environmental Engineering, University of Perugia, Via G. Duranti 93, 06125 Perugia, Italy
2Department of Continuum Mechanics and Structural Analysis, School of Engineering, University of Seville, Camino de los Descubrimientos s/n, 41092 Seville, Spain
3Department of Mechanics, University of Cordoba, Campus de Rabanales, 14071 Cordoba, Spain
4Department of Civil, Construction, and Environmental Engineering, Iowa State University, 394 Town Engineering, Ames, IA 50011, USA

Correspondence should be addressed to Antonella D’Alessandro; ti.gpinu@ordnasselad.allenotna

Received 28 February 2017; Accepted 28 June 2017; Published 7 August 2017

Academic Editor: Marcello Vanali

Copyright © 2017 Antonella D’Alessandro et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [4 citations]

The following is the list of published articles that have cited the current article.

  • Antonella D’Alessandro, Andrea Meoni, and Filippo Ubertini, “Stainless Steel Microfibers for Strain-Sensing Smart Clay Bricks,” Journal of Sensors, vol. 2018, pp. 1–8, 2018. View at Publisher · View at Google Scholar
  • Gürkan Yıldırım, Özgür Anıl, Mustafa Şahmaran, Mohammad Haroon Sarwary, Ali Al-Dahawi, and Oğuzhan Öztürk, “Piezoresistive behavior of CF- and CNT-based reinforced concrete beams subjected to static flexural loading: Shear failure investigation,” Construction and Building Materials, vol. 168, pp. 266–279, 2018. View at Publisher · View at Google Scholar
  • Jandro Abot, Mário Góngora-Rubio, Jude Anike, César Kiyono, Luis A. Mello, Valtemar Cardoso, Reinaldo L. Rosa, Derek Kuebler, Grace Brodeur, Amani Alotaibi, Marisa Coene, Lauren Coene, Elizabeth Jean, Rafael Santiago, Francisco H. Oliveira, Ricardo Rangel, Gilles Thomas, Kalayu Belay, Luciana da Silva, Rafael Moura, Antonio Seabra, and Emílio C. Silva, “Foil Strain Gauges Using Piezoresistive Carbon Nanotube Yarn: Fabrication and Calibration,” Sensors, vol. 18, no. 2, pp. 464, 2018. View at Publisher · View at Google Scholar
  • A. D'Alessandro, A. Meoni, and F. Ubertini, “Innovative Composites with Carbon Nanofillers for Self-Sensing Structural RC Beams,” Nano Hybrids and Composites, vol. 19, pp. 12–22, 2018. View at Publisher · View at Google Scholar