Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2017, Article ID 7236956, 10 pages
https://doi.org/10.1155/2017/7236956
Research Article

Field Tests to Investigate the Penetration Rate of Piles Driven by Vibratory Installation

Department of Civil Engineering, Shanghai Jiaotong University, Shanghai 200240, China

Correspondence should be addressed to Longzhu Chen; nc.ude.utjs@nehczl

Received 26 October 2016; Revised 6 April 2017; Accepted 23 April 2017; Published 21 May 2017

Academic Editor: Fiorenzo A. Fazzolari

Copyright © 2017 Zhaohui Qin et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Holeyman, “Vibratory driving analysis,” in Proceedings of the 6th International Conference on the Application of Stress-Wave Theory to Piles, pp. 479–494, Sao Paulo, Brazil, September 2000.
  2. A. Holeyman and L. Michiels, “Vibratory penetration and flow shearing in granular materials a review of perspectives,” in Proceedings of the International Conference on Vibratory Pile Driving and Deep Soil Compaction, pp. 31–52, Pairs, France, September 2006.
  3. A. Holeyman and V. Whenham, “Critical review of the Hypervib1 model to assess pile vibro-drivability,” Geotechnical and Geological Engineering, no. 3, pp. 1–19, 2017. View at Publisher · View at Google Scholar
  4. K. Viking, “The vibratory pile installation technique,” in Proceedings of the International Conference on Vibratory Pile Driving and Deep Soil Compaction, pp. 65–82, Pairs, France, September 2006.
  5. K. Viking, Vibro-driveability-A field study driven sheet piles in non-cohesive soils [Ph.D. thesis], Royal Institute of Technology, Stockholm, Sweden, 2002.
  6. T. Mayrberger, K. Braun, W. N. Scott, and J. Cologgi, “Vibratory driven piles in cold permafrost,” in Proceedings of the Arctic Technology Conference, pp. 1–12, Houston, Tex, USA, December 2012. View at Scopus
  7. T. Mayrberger, K. Braun, W. N. Scott, and J. Cologgi, “The adfreeze strength characteristics of vibratory driven piles,” in Proceedings of the 10th International Symposium on Cold Regions Development: Planning for Sustainable Cold Regions, ISCORD 2013, pp. 45–58, Anchorage, Alaska, USA, June 2013. View at Scopus
  8. Y. Tan and S. G. Paikowsky, “Performance of sheet pile wall in peat,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 134, no. 4, pp. 445–458, 2008. View at Publisher · View at Google Scholar · View at Scopus
  9. G. Boscato, J. T. Mottram, and S. Russo, “Dynamic response of a sheet pile of fiber-reinforced polymer for waterfront barriers,” Journal of Composites for Construction, vol. 15, no. 6, pp. 974–984, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. E. C. Lamiman and B. Robinson, “Bearing capacity reduction of vibratory installed large diameter pipe piles,” in Proceedings of the Geo-Congress, pp. 475–481, ASCE, Atlanta, GA, USA, February 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Ghose-Hajra, R. Jensen, and L. Hulliger, “Pile setup and axial capacity gain for driven piles installed using impact hammer versus vibratory system,” in Proceedings of the International Foundations Congress and Equipment Expo 2015, IFCEE, pp. 1064–1074, San Antonio, Tex, USA, March 2015. View at Publisher · View at Google Scholar · View at Scopus
  12. K. Kelevišius, L. Gabrielaitis, J. Amšiejus, A. Norkus, and Z. Sikora, “Study of bearing capacity of vibratory pile applying acceleration record,” Journal of Civil Engineering and Management, vol. 20, no. 1, pp. 142–148, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. G. A. Athanasopoulos and P. C. Pelekis, “Ground vibrations from sheetpile driving in urban environment: measurements, analysis and effects on buildings and occupants,” Soil Dynamics and Earthquake Engineering, vol. 19, no. 5, pp. 371–387, 2000. View at Publisher · View at Google Scholar · View at Scopus
  14. H. R. Masoumi, G. Degrande, and G. Lombaert, “Prediction of free field vibrations due to pile driving using a dynamic soil-structure interaction formulation,” Soil Dynamics and Earthquake Engineering, vol. 27, no. 2, pp. 126–143, 2007. View at Publisher · View at Google Scholar · View at Scopus
  15. H. R. Masoumi and G. Degrande, “Numerical modeling of free field vibrations due to pile driving using a dynamic soil-structure interaction formulation,” Journal of Computational and Applied Mathematics, vol. 215, no. 2, pp. 503–511, 2008. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  16. H. R. Masoumi, S. François, and G. Degrande, “A non-linear coupled finite element-boundary element model for the prediction of vibrations due to vibratory and impact pile driving,” International Journal for Numerical and Analytical Methods in Geomechanics, vol. 33, no. 2, pp. 245–274, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. E. L. Hajduk, K. C. Bower, T. W. Mays, D. A. Falatok, and T. S. Perkins, “Development of a driven pile ground vibration case history database,” in Proceedings of the International Foundation Congress and Equipment Exposition, pp. 351–358, ASCE, Orlando, Fla, USA,, March 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. K. R. Massarsch and B. H. Fellenius, “Ground vibrations from pile and sheet pile driving, Part 1-building damage,” in Proceedings of the International Conference on Piling and Deep Foundations, pp. 131–139, Stockholm, Sweden, May 2014.
  19. D. S. Liyanapathirana and S. D. Ekanayake, “Application of EPS geofoam in attenuating ground vibrations during vibratory pile driving,” Geotextiles and Geomembranes, vol. 44, no. 1, pp. 59–69, 2016. View at Publisher · View at Google Scholar · View at Scopus
  20. G. John, S. M. Jill-Roboski, and J. F. Richard, “Sheet pile-iduced vibrations at the lurie excavation project,” in Proceedings of the Geotechnical Engineering for Transportation Projects, pp. 2130–2138, Los Angeles, USA, July 2004.
  21. M. R. Svinkin, “Mitigation of soil movements from pile driving,” Practice Periodical on Structural Design and Construction, vol. 11, no. 2, pp. 80–85, 2006. View at Publisher · View at Google Scholar · View at Scopus
  22. P. Meijers and A. F. Tol, “The Raamsdonksveer sheet pile test observered settlements due to installation of vibratory driven sheet piles,” in Proceedings of the International Conference on Vibratory Pile Driving and Deep Soil Compaction, pp. 353–362, Pairs, France, September 2006.
  23. K. P. Mahutka and J. Grabe, “Numerical prediction of settlements and vibrations due to vibratory pile driving using a continuum model,” in Proceedings of the International Conference on Vibratory Pile Driving and Deep Soil Compaction, pp. 243–252, Pairs, France, September 2006.
  24. V. Whenham, N. Huybrechts, C. Legrand, M.-P. Bourdouxhe, and A. Shimtt, “Energy consumption during sheet piles vibro-driving: experimental results,” in Proceedings of the International Conference on Vibratory Pile Driving and Deep Soil Compaction, pp. 209–218, Pairs, France, September 2006.
  25. V. Whenham and A. Holeyman, “Full scale sheet pile vibro-driving tests,” in Proceedings of the 17th International Conference on Soil Mechanics and Geotechnical Engineering, pp. 1354–1357, Alexandria, Egypt, October 2009.
  26. S.-H. Lee, B.-I. Kim, and J.-T. Han, “Prediction of penetration rate of sheet pile installed in sand by vibratory pile driver,” KSCE Journal of Civil Engineering, vol. 16, no. 3, pp. 316–324, 2012. View at Google Scholar · View at Scopus
  27. Z. Feng and R. J. Deschamps, “A study of the factors influencing the penetration and capacity of vibratory driven piles,” Soils and Foundations, vol. 40, no. 3, pp. 43–54, 2000. View at Google Scholar · View at Scopus
  28. A. A. Rodger and G. S. Littlejohn, “Study of vibratory driving in granular soils,” Geotechnique, vol. 30, no. 3, pp. 269–293, 1980. View at Publisher · View at Google Scholar · View at Scopus
  29. M. W. O’Neill, C. Vipulanandan, and D. Wong, “Laboratory modeling of vibro-driven piles,” Journal of Geotechnical Engineering, vol. 116, no. 8, pp. 1190–1209, 1990. View at Publisher · View at Google Scholar · View at Scopus
  30. C. Vipulanandan, D. Wong, and M. W. O’Neill, “Behavior of vibro-driven piles in sand,” Journal of Geotechnical Engineering, vol. 116, no. 8, pp. 1211–1230, 1990. View at Publisher · View at Google Scholar · View at Scopus
  31. D. J. Chen, L. Z. Chen, and J. G. Zheng, “Experimental study on mechanism of piling with high-frequency vibration,” Railway Engineering, vol. 7, pp. 49–51, 2006 (Chinese). View at Google Scholar
  32. K. Viking and A. Bodare, “Laboratory studies of dynamic shaft resistance response of a vibro-driven model pile in granular soil by varying the relative density,” in Proceedings of the 12th European Conference on Soil Mechanics and Geotechnical Engineering, pp. 863–869, Amsterdam, Netherlands, June 1999.
  33. S.-H. Lee and B.-I. I. Kim, “A study on the effect of lateral vibration of sheet piles on vibratory driving force,” Journal of the Korean Industry Technology, vol. 8, no. 4, pp. 848–852, 2007 (Korean). View at MathSciNet
  34. S.-H. Lee, B-.I. I. Kim, and Z.-C. Kim, “Parameteric study on lateral vibration model of steel sheet pile,” Journal of the Korean Industry Technology, vol. 7, no. 3, pp. 1047–1052 (Hungarian), 2010 (Korean).
  35. H. Zeilinger, “The vibro-jetting driving method,” in Proceedings of the International Foundation Congress and Equipment Exposition, pp. 311–318, ASCE, Orlando, Fla, USA, 2009.