Research Article
Strength and Failure Characteristics of Natural and Water-Saturated Coal Specimens under Static and Dynamic Loads
Table 2
Natural and saturated specimen parameters under uniaxial static-dynamic compressive tests.
| Specimen number | Saturated status | Diameter/ mm | Length/mm | Density g/cm−3 | Static uniaxial pressure/MPa | Strain rate /s−1 | Strength/MPa | Grain size/mm | Dry | Wet | Tested | Average |
| B1 | Natural | 4.95 | 3.06 | 1.34 | / | 12 | 107 | 46.93 | 46.72 | 17.09 | B2 | Natural | 4.98 | 3.09 | 1.33 | / | 12 | 131 | 46.50 | | 16.42 | B3 | Natural | 4.98 | 3.04 | 1.48 | / | 12 | 117 | 43.47 | | 15.84 | B4 | Natural | 4.96 | 3.11 | 1.30 | / | 12 | 111 | 49.96 | | 16.11 | B5 | 7D water | 4.96 | 3.04 | 1.35 | 1.41 | 12 | 115 | 17.73 | 28.44 | 13.18 | B6 | 7D water | 4.96 | 2.98 | 1.41 | 1.48 | 12 | 128 | 40.63 | | 12.08 | B7 | 7D water | 4.99 | 3.00 | 1.36 | 1.42 | 12 | 97 | 31.50 | | 12.01 | B8 | 7D water | 4.95 | 3.14 | 1.34 | 1.39 | 12 | 128 | 23.88 | | 13.54 |
|
|