Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2018 (2018), Article ID 7626075, 11 pages
https://doi.org/10.1155/2018/7626075
Research Article

High-Energy Impact Behaviors of Hybrid Composite Plates Strengthened with 3D-UHMWPE Composites

1Department of Civil Engineering, Andong National University, Andong-Si, Gyeongsangbuk-Do, Republic of Korea
2Department of Architecture Engineering, Keimyung University, Dalseo-Gu, Daegu 42601, Republic of Korea
3Department of Civil Engineering, Keimyung University, Dalseo-Gu, Daegu 42601, Republic of Korea

Correspondence should be addressed to Chun-Ho Chang

Received 23 May 2017; Revised 16 December 2017; Accepted 27 December 2017; Published 23 January 2018

Academic Editor: Luigi Di Sarno

Copyright © 2018 Sang-Youl Lee et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. C. Bank, Composites for Construction: Structural Design with FRP Materials, John Wiley & Sons, Hoboken, NJ, USA, 2006.
  2. D. J. Oehlers and R. Seracino, Design of FRP and Steel Plated RC Structures: Retrofitting Beams and Slabs for Strength, Stiffness and Ductility, Elsevier, Oxford, UK, 2004.
  3. J. G. Teng, J. F. Chen, S. T. Smith, and L. Lam, FRP-Strengthened RC Structures, John Wiley & Sons, Chichester, UK, 2002.
  4. L. C. Hollaway and J. G. Teng, Strengthening and Rehabilitation of Civil Infrastructures Using Fibre-Reinforced Polymer (FRP) Composites, Elsevier, 2008.
  5. Y.-F. Wu and C. Jiang, “Effect of load eccentricity on the stress-strain relationship of FRP-confined concrete columns,” Composite Structures, vol. 98, pp. 228–241, 2013. View at Publisher · View at Google Scholar · View at Scopus
  6. A. Nanni and N. M. Bradford, “FRP jacketed concrete under uniaxial compression,” Construction and Building Materials, vol. 9, no. 2, pp. 115–124, 1995. View at Publisher · View at Google Scholar · View at Scopus
  7. L. Nguyen-Minh and M. Rovňák, “Shear resistance of GFRP-reinforced concrete beams,” Magazine of Concrete Research, vol. 63, no. 3, pp. 215–233, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. T. M. Pham and H. Hao, “Review of concrete structures strengthened with FRP against impact loading,” Structures, vol. 7, pp. 59–70, 2016. View at Publisher · View at Google Scholar · View at Scopus
  9. ACI 440.2R-08, Guide for the design and construction of externally bonded FRP Systems for Strengthening Concrete Structures, 4402R-08, American Concrete Institute, Farmington Hills, Mich, USA, 2008.
  10. TR 55, Design Guidance for Strengthening Concrete Structures Using Fibre Composite Materials, Concrete Society, Camberley, UK, 2012.
  11. fib, “Externally bonded FRP reinforcement for RC structures,” Tech. Rep. Bulletin no. 14, 2001. View at Google Scholar
  12. P. A. Buchan and J. F. Chen, “Blast resistance of FRP composites and polymer strengthened concrete and masonry structures—a state-of-the-art review,” Composites Part B: Engineering, vol. 38, no. 5-6, pp. 509–522, 2007. View at Publisher · View at Google Scholar · View at Scopus
  13. T. M. Pham and H. Hao, “Axial impact resistance of FRP-confined concrete,” Journal of Composites for Construction, vol. 21, no. 2, Article ID 04016088, 2017. View at Publisher · View at Google Scholar · View at Scopus
  14. R. Wang, L.-H. Han, and Z. Tao, “Behavior of FRP-concrete-steel double skin tubular members under lateral impact: Experimental study,” Thin-Walled Structures, vol. 95, article no. 4560, pp. 363–373, 2015. View at Publisher · View at Google Scholar · View at Scopus
  15. T. Lässig, F. Bagusat, M. May, and S. Hiermaier, “Analysis of the shock response of UHMWPE composites using the inverse planar plate impact test and the shock reverberation technique,” International Journal of Impact Engineering, vol. 86, pp. 240–248, 2015. View at Publisher · View at Google Scholar · View at Scopus
  16. T. G. Zhang, S. S. Satapathy, L. R. Vargas-Gonzalez, and S. M. Walsh, “Ballistic impact response of Ultra-High-Molecular-Weight Polyethylene (UHMWPE),” Composite Structures, vol. 133, pp. 191–201, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. M. R. O’Masta, B. G. Compton, E. A. Gamble, F. W. Zok, V. S. Deshpande, and H. N. G. Wadley, “Ballistic impact response of an UHMWPE fiber reinforced laminate encasing of an aluminum-alumina hybrid panel,” International Journal of Impact Engineering, vol. 86, pp. 131–144, 2015. View at Publisher · View at Google Scholar · View at Scopus
  18. Z. Sharif-Khodaei, M. Ghajari, and M. H. Aliabadi, “Impact damage detection in composite plates using a self-diagnostic electro-mechanical impedance-based structural health monitoring system,” Journal of Multiscale Modelling, vol. 6, no. 4, pp. 1–20, 2015. View at Google Scholar · View at MathSciNet