Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2018, Article ID 7845143, 13 pages
https://doi.org/10.1155/2018/7845143
Research Article

Experimental Investigation of Sandstone under Cyclic Loading: Damage Assessment Using Ultrasonic Wave Velocities and Changes in Elastic Modulus

1Key Laboratory of Deep Coal Resource Mining, Ministry of Education of China, School of Mines, China University of Mining and Technology, Xuzhou, Jiangsu 221116, China
2Department of Energy and Mineral Engineering, G3 Center and Energy Institute, The Pennsylvania State University, University Park, PA 16802, USA

Correspondence should be addressed to Nong Zhang; moc.361@gnongnahzforp

Received 2 November 2017; Revised 23 February 2018; Accepted 11 March 2018; Published 11 April 2018

Academic Editor: Emanuele Reccia

Copyright © 2018 Sen Yang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. D. Tannant, R. K. Brummer, and X. Yi, “Rockbolt behaviour under dynamic loading: Field tests and modelling,” International Journal of Rock Mechanics and Mining Sciences, vol. 32, no. 6, pp. 537–550, 1995. View at Publisher · View at Google Scholar · View at Scopus
  2. A. Cao, L. Dou, W. Cai, S. Gong, S. Liu, and G. Jing, “Case study of seismic hazard assessment in underground coal mining using passive tomography,” International Journal of Rock Mechanics and Mining Sciences, vol. 78, pp. 1–9, 2015. View at Publisher · View at Google Scholar · View at Scopus
  3. M. He, N. Li, Y. Chen, and C. Zhu, “Strength and fatigue properties of sandstone under dynamic cyclic loading,” Shock and Vibration, vol. 2016, Article ID 9458582, 8 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  4. X. S. Liu, J. G. Ning, Y. L. Tan, and Q. H. Gu, “Damage constitutive model based on energy dissipation for intact rock subjected to cyclic loading,” International Journal of Rock Mechanics and Mining Sciences, vol. 85, pp. 27–32, 2016. View at Publisher · View at Google Scholar · View at Scopus
  5. X. Li, Z. Zhou, T.-S. Lok, L. Hong, and T. Yin, “Innovative testing technique of rock subjected to coupled static and dynamic loads,” International Journal of Rock Mechanics and Mining Sciences, vol. 45, no. 5, pp. 739–748, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Azadi and S. M. M. Hosseini, “The uplifting behavior of shallow tunnels within the liquefiable soils under cyclic loadings,” Tunnelling and Underground Space Technology, vol. 25, no. 2, pp. 158–167, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Nemcik, A. Mirzaghorbanali, and N. Aziz, “An elasto-plastic constitutive model for rock joints under cyclic loading and constant normal stiffness conditions,” Geotechnical and Geological Engineering, vol. 32, no. 2, pp. 321–335, 2014. View at Publisher · View at Google Scholar · View at Scopus
  8. X. Leng, J. Liu, Z. Cui, and Q. Sheng, “Study on failure characteristics of basalt subjected to triaxial cyclic loading,” Applied Mechanics and Materials, vol. 204-208, pp. 405–409, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. E. Liu and S. He, “Effects of cyclic dynamic loading on the mechanical properties of intact rock samples under confining pressure conditions,” Engineering Geology, vol. 125, no. 27, pp. 81–91, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. L.-J. Ma, X.-Y. Liu, M.-Y. Wang et al., “Experimental investigation of the mechanical properties of rock salt under triaxial cyclic loading,” International Journal of Rock Mechanics & Mining Sciences, vol. 62, pp. 34–41, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. N. Gatelier, F. Pellet, and B. Loret, “Mechanical damage of an anisotropic porous rock in cyclic triaxial tests,” International Journal of Rock Mechanics and Mining Sciences, vol. 39, no. 3, pp. 335–354, 2002. View at Publisher · View at Google Scholar · View at Scopus
  12. M. V. M. S. Rao and Y. V. Ramana, “A study of progressive failure of rock under cyclic loading by ultrasonic and AE monitoring techniques,” Rock Mechanics and Rock Engineering, vol. 25, no. 4, pp. 237–251, 1992. View at Publisher · View at Google Scholar · View at Scopus
  13. C. A. Tang and P. K. Kaiser, “Numerical simulation of cumulative damage and seismic energy release during brittle rock failure—part I: fundamentals,” International Journal of Rock Mechanics and Mining Sciences, vol. 35, no. 2, pp. 113–121, 1998. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Cai, P. K. Kaiser, and C. D. Martin, “Quantification of rock mass damage in underground excavations from microseismic event monitoring,” International Journal of Rock Mechanics and Mining Sciences, vol. 38, no. 8, pp. 1135–1145, 2001. View at Publisher · View at Google Scholar · View at Scopus
  15. H. Xie, L. Li, Y. Ju, R. Peng, and Y. Yang, “Energy analysis for damage and catastrophic failure of rocks,” Science China Technological Sciences, vol. 54, no. 1, pp. 199–209, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. J. Liu, H. Xie, Z. Hou, C. Yang, and L. Chen, “Damage evolution of rock salt under cyclic loading in unixial tests,” Acta Geotechnica, vol. 9, no. 1, pp. 153–160, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. J. S. Kim, K. S. Lee, W. J. Cho, H. Choi, and G. Cho, “A comparative evaluation of stress–strain and acoustic emission methods for quantitative damage assessments of brittle rock,” Rock Mechanics and Rock Engineering, vol. 48, no. 2, pp. 495–508, 2015. View at Publisher · View at Google Scholar
  18. R. Peng, Y. Ju, J. G. Wang, H. Xie, F. Gao, and L. Mao, “Energy Dissipation and Release During Coal Failure Under Conventional Triaxial Compression,” Rock Mechanics and Rock Engineering, vol. 48, no. 2, pp. 509–526, 2014. View at Publisher · View at Google Scholar · View at Scopus
  19. H. P. Xie, Y. Ju, L. Y. Li, and R. D. Peng, “Energy mechanism of deformation and failure of rock masses,” Chinese Journal of Rock Mechanics and Engineering, vol. 27, no. 9, pp. 1729–1739, 2008 (Chinese). View at Google Scholar
  20. J. Lemaitre, “A continuous damage mechanics model for ductile fracture,” Journal of Engineering Materials and Technology, vol. 107, no. 1, pp. 83–89, 1985. View at Publisher · View at Google Scholar · View at Scopus
  21. C. H. Scholz and T. A. Koczynski, “Dilatancy anisotropy and the response of rock to large cyclic loads,” Journal of Geophysical Research: Atmospheres, vol. 84, no. 10, pp. 5525–5534, 1979. View at Publisher · View at Google Scholar · View at Scopus
  22. C. D. Martin, “The effect of cohesion loss and stress path on brittle rock strength,” Canadian Geotechnical Journal, vol. 34, no. 5, pp. 698–725, 1997. View at Publisher · View at Google Scholar · View at Scopus
  23. L. S. Costin and D. J. Holcomb, “Time-dependent failure of rock under cyclic loading,” Tectonophysics, vol. 79, no. 3-4, pp. 279–296, 1981. View at Publisher · View at Google Scholar · View at Scopus
  24. Z. Tao and H. Mo, “An experimental study and analysis of the behaviour of rock under cyclic loading,” International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, vol. 27, no. 1, pp. 51–56, 1990. View at Google Scholar
  25. C. D. Martin and N. A. Chandler, “The progressive fracture of Lac du Bonnet granite,” International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, vol. 31, no. 6, pp. 643–659, 1994. View at Google Scholar
  26. S. K. Ray, M. Sarkar, and T. N. Singh, “Effect of cyclic loading and strain rate on the mechanical behaviour of sandstone,” International Journal of Rock Mechanics and Mining Sciences, vol. 36, no. 4, pp. 543–549, 1999. View at Publisher · View at Google Scholar
  27. M. K. Jafari, F. Pellet, M. Boulon, and K. A. Hosseini, “Experimental study of mechanical behaviour of rock joints under cyclic loading,” Rock Mechanics and Rock Engineering, vol. 37, no. 1, pp. 3–23, 2004. View at Publisher · View at Google Scholar · View at Scopus
  28. X. T. Feng, P. Z. Pan, and H. Zhou, “Simulation of the rock microfracturing process under uniaxial compression using an elasto-plastic cellular automaton,” International Journal of Rock Mechanics and Mining Sciences, vol. 43, no. 7, pp. 1091–1108, 2006. View at Publisher · View at Google Scholar · View at Scopus
  29. K. Khaledi, E. Mahmoudi, M. Datcheva, and T. Schanz, “Stability and serviceability of underground energy storage caverns in rock salt subjected to mechanical cyclic loading,” International Journal of Rock Mechanics and Mining Sciences, vol. 86, pp. 115–131, 2016. View at Publisher · View at Google Scholar · View at Scopus
  30. N. Li, W. Chen, P. Zhang, and G. Swoboda, “The mechanical properties and a fatigue-damage model for jointed rock masses subjected to dynamic cyclical loading,” International Journal of Rock Mechanics and Mining Sciences, vol. 38, no. 7, pp. 1071–1079, 2001. View at Publisher · View at Google Scholar · View at Scopus
  31. M. N. Bagde and V. Petroš, “Fatigue and dynamic energy behaviour of rock subjected to cyclical loading,” International Journal of Rock Mechanics and Mining Sciences, vol. 46, no. 1, pp. 200–209, 2009. View at Publisher · View at Google Scholar · View at Scopus
  32. J. Q. Xiao, D. X. Ding, F. L. Jiang, and G. Xu, “Fatigue damage variable and evolution of rock subjected to cyclic loading,” International Journal of Rock Mechanics and Mining Sciences, vol. 47, no. 3, pp. 461–468, 2010. View at Publisher · View at Google Scholar
  33. J. Fan, J. Chen, D. Jiang, S. Ren, and J. Wu, “Fatigue properties of rock salt subjected to interval cyclic pressure,” International Journal of Fatigue, vol. 90, pp. 109–115, 2016. View at Publisher · View at Google Scholar · View at Scopus
  34. Y. Guéguen and A. Schubnel, “Elastic wave velocities and permeability of cracked rocks,” Tectonophysics, vol. 370, no. 1-4, pp. 163–176, 2003. View at Publisher · View at Google Scholar · View at Scopus
  35. I. N. Gupta, “Seismic velocities in rock subjected to axial loading up to shear fracture,” Journal of Geophysical Research: Atmospheres, vol. 78, no. 29, pp. 6936–6942, 1973. View at Publisher · View at Google Scholar
  36. S. Stanchits, S. Vinciguerra, and G. Dresen, “Ultrasonic velocities, acoustic emission characteristics and crack damage of basalt and granite,” Pure and Applied Geophysics, vol. 163, no. 5-6, pp. 974–993, 2006. View at Publisher · View at Google Scholar · View at Scopus
  37. Z. T. Bieniawski and M. J. Bernede, “Suggested methods for determining the uniaxial compressive strength and deformability of rock materials. Part 1. Suggested method for determination of the uniaxial compressive strength of rock materials,” International Journal of Rock Mechanics and Mining Sciences, vol. 16, no. 2, p. 137, 1979. View at Publisher · View at Google Scholar · View at Scopus
  38. D. T. Griggs, “The factor of fatigue in rock exfoliation,” The Journal of Geology, vol. 44, no. 7, pp. 783–796, 1936. View at Publisher · View at Google Scholar
  39. M. L. Kachanov, “A microcrack model of rock inelasticity part I: Frictional sliding on microcracks,” Mechanics of Materials, vol. 1, no. 1, pp. 19–27, 1982. View at Publisher · View at Google Scholar · View at Scopus
  40. J. W. Zhou, W. Y. Xu, and X. G. Yang, “A microcrack damage model for brittle rocks under uniaxial compression,” Mechanics Research Communications, vol. 37, no. 4, pp. 399–405, 2010. View at Publisher · View at Google Scholar · View at Scopus
  41. G. Mavko, T. Mukerji, and J. Dvorkin, The Rock Physics Handbook: Tools for Seismic Analysis of Porous Media, Cambridge University Press, Cambridge, UK, 2009.
  42. J. A. Hudson, “Wave speeds and attenuation of elastic waves in material containing cracks,” The Geophysical Journal of the Royal Astronomical Society, vol. 64, no. 1, pp. 133–150, 1981. View at Publisher · View at Google Scholar · View at Scopus
  43. C. M. Sayers, “Inversion of ultrasonic wave velocity measurements to obtain the microcrack orientation distribution function in rocks,” Engineering Fracture Mechanics, vol. 35, no. 4-5, pp. 743–749, 1990. View at Publisher · View at Google Scholar · View at Scopus
  44. M. G. Ezersky, “Behavior of seismic-acoustic parameters during deforming and failure of rock samples, large blocks and underground opening: base for monitoring,” International Journal of Geo-Engineering, vol. 8, no. 1, p. 13, 2017. View at Publisher · View at Google Scholar
  45. J. Kaiser, “Erkenntnisse und Folgerungen aus der Messung von Geräuschen bei Zugbeanspruchung von metallischen Werkstoffen,” Steel Research International, vol. 24, no. 1-2, pp. 43–45, 1953. View at Publisher · View at Google Scholar
  46. M. R. Ayling, An experimental study of physical property changes in crustal rocks undergoing triaxial deformation [Ph.D. dissertation], 1992.
  47. M. R. Ayling, P. G. Meredith, and S. A. F. Murrell, “Microcracking during triaxial deformation of porous rocks monitored by changes in rock physical properties, I. Elastic-wave propagation measurements on dry rocks,” Tectonophysics, vol. 245, no. 3-4, pp. 205–221, 1995. View at Publisher · View at Google Scholar · View at Scopus