Research Article
Vibrations of Flat-End Cutter Entering Workpiece Process: Modeling, Simulations, and Experiments
Table 6
Cutting conditions for the measurement with cutter entering along circular paths.
| Test No. | Milling type | Radial depth of cut ae (mm) | Axial depth of cut ap (mm) | Feed per tooth fz (mm/tooth) | Spindle speed (rpm) | |
| 1 | Up | 1 | 2 | 0.04 | 1000 | 5 | 2 | Up | 1 | 2 | 0.08 | 1000 | 5 | 3 | Up | 1 | 2 | 0.12 | 1000 | 5 | 4 | Up | 1 | 3 | 0.04 | 1000 | 3 | 5 | Up | 1 | 3 | 0.08 | 1000 | 3 | 6 | Up | 1 | 3 | 0.12 | 1000 | 3 |
|
|