Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2018, Article ID 8798232, 17 pages
https://doi.org/10.1155/2018/8798232
Research Article

Performance Evaluation of Hard Rock TBMs considering Operational and Rock Conditions

1Shanghai Key Laboratory of Digital Manufacture for Thin-Walled Structures, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, China
2Institute of Vibration, Shock and Noise, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, China

Correspondence should be addressed to Hui Zheng; nc.ude.utjs@gnehziuh

Received 7 September 2017; Accepted 10 January 2018; Published 11 March 2018

Academic Editor: Miguel Neves

Copyright © 2018 Xiaoyang Zou et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. Maidl, L. Schmid, W. Rits, and M. Herrenknecht, Hardrock Tunnel Boring Machines, Ernst and Sohn, Berlin, Germany, 2008.
  2. A. E. Samuel and L. P. Seow, “Disc force measurements on a full-face tunneling machine,” International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, vol. 21, no. 2, pp. 83–96, 1984. View at Google Scholar
  3. Z. X. Zhang, S. Q. Kou, X. C. Tan, and P.-A. Lindqvist, “In-situ measurements of cutter forces on boring machine at Äspö Hard Rock Laboratory. Part I. Laboratory calibration and in-situ measurements,” Rock Mechanics and Rock Engineering, vol. 36, no. 1, pp. 39–61, 2003. View at Publisher · View at Google Scholar · View at Scopus
  4. Z. X. Zhang, S. Q. Kou, and P.-A. Lindqvist, “In-situ measurements of cutter forces on boring machine at Äspö Hard Rock Laboratory. Part II. Characteristics of cutter forces and examination of cracks generated,” Rock Mechanics and Rock Engineering, vol. 36, no. 1, pp. 63–83, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. Z. X. Zhang, “Estimate of loading rate for a TBM machine based on measured cutter forces,” Rock Mechanics and Rock Engineering, vol. 37, no. 3, pp. 239–248, 2004. View at Google Scholar · View at Scopus
  6. M. Entacher, G. Winter, T. Bumberger, K. Decker, I. Godor, and R. Galler, “Cutter force measurement on tunnel boring machines - System design,” Tunnelling and Underground Space Technology, vol. 31, pp. 97–106, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Entacher, G. Winter, and R. Galler, “Cutter force measurement on tunnel boring machines - Implementation at Koralm tunnel,” Tunnelling and Underground Space Technology, vol. 38, pp. 487–496, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. M. Entacher, K. Lassnig, and R. Galler, “Analysis of force path diagrams of linear cutting machine-tests regarding geotechnical parameters,” in Proceedings of the GeoCongress 2012: State of the Art and Practice in Geotechnical Engineering, pp. 3258–3267, USA, March 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Huo, H. Wu, G. Li, W. Sun, and J. Chen, “The coupling dynamic analysis and field test of TBM main system under multipoint impact excitation,” Shock and Vibration, vol. 2015, Article ID 313259, 14 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. W. Sun, J. Ling, J. Huo, L. Guo, X. Zhang, and L. Deng, “Dynamic characteristics study with multidegree-of-freedom coupling in TBM cutterhead system based on complex factors,” Mathematical Problems in Engineering, vol. 2013, Article ID 635809, 17 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. X. Y. Zou, H. Zheng, Y. Z. Mi, and X. Xie, “A study on vibration of tunnel boring machine and the induced shield tangential force,” Journal of Vibrational Engineering and Technologies, vol. 4, no. 4, pp. 373–381, 2016. View at Google Scholar · View at Scopus
  12. R. Gertsch, L. Gertsch, and J. Rostami, “Disc cutting tests in Colorado Red Granite: Implications for TBM performance prediction,” International Journal of Rock Mechanics and Mining Sciences, vol. 44, no. 2, pp. 238–246, 2007. View at Publisher · View at Google Scholar · View at Scopus
  13. J.-W. Cho, S. Jeon, S.-H. Yu, and S.-H. Chang, “Optimum spacing of TBM disc cutters: A numerical simulation using the three-dimensional dynamic fracturing method,” Tunnelling and Underground Space Technology, vol. 25, no. 3, pp. 230–244, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. J.-W. Cho, S. Jeon, H.-Y. Jeong, and S.-H. Chang, “Evaluation of cutting efficiency during TBM disc cutter excavation within a Korean granitic rock using linear-cutting-machine testing and photogrammetric measurement,” Tunnelling and Underground Space Technology, vol. 35, pp. 37–54, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. Z. X. Zhang, S. Q. Kou, L. G. Jiang, and P.-A. Lindqvist, “Effects of loading rate on rock fracture: fracture characteristics and energy partitioning,” International Journal of Rock Mechanics and Mining Sciences, vol. 37, no. 5, pp. 745–762, 2000. View at Publisher · View at Google Scholar · View at Scopus
  16. L. Wang, Y. Kang, Z. Cai et al., “The energy method to predict disc cutter wear extent for hard rock TBMs,” Tunnelling and Underground Space Technology, vol. 28, no. 1, pp. 183–191, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. H.-S. Jung, J.-M. Choi, B.-S. Chun, J.-S. Park, and Y.-J. Lee, “Causes of reduction in shield TBM performance - A case study in Seoul,” Tunnelling and Underground Space Technology, vol. 26, no. 3, pp. 453–461, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. L. Wang, Y. Kang, X. Zhao, and Q. Zhang, “Disc cutter wear prediction for a hard rock TBM cutterhead based on energy analysis,” Tunnelling and Underground Space Technology, vol. 50, pp. 324–333, 2015. View at Publisher · View at Google Scholar · View at Scopus
  19. Q. Tan, L. Xie, Y. Xia, Z. Zhu, X. Sun, and Y. Wang, “Analysis of wear rate of TBM disc cutter,” Journal of Central South University Science and Technology, vol. 46, no. 3, pp. 843–848, 2015. View at Publisher · View at Google Scholar · View at Scopus
  20. X. Zou, Y. Mi, H. Zheng, and J. Tao, “Influence of vibration on the performance of tunnel boring machines,” in Proceedings of the 12th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2016, New Zealand, August 2016. View at Publisher · View at Google Scholar · View at Scopus
  21. H. Yu, P. Eberhard, Y. Zhao, and H. Wang, “Sharing behavior of load transmission on gear pair systems actuated by parallel arrangements of multiple pinions,” Mechanism and Machine Theory, vol. 65, pp. 58–70, 2013. View at Publisher · View at Google Scholar · View at Scopus
  22. J. Wei, Q. Sun, W. Sun, X. Ding, W. Tu, and Q. Wang, “Load-sharing characteristic of multiple pinions driving in tunneling boring machine,” Chinese Journal of Mechanical Engineering, vol. 26, no. 3, pp. 532–540, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. J. Hong, Computational Dynamics of Multibody System, Higher Education Press, Beijing, 1999, in Chinese.
  24. C. Germay, V. Denoël, and E. Detournay, “Multiple mode analysis of the self-excited vibrations of rotary drilling systems,” Journal of Sound and Vibration, vol. 325, no. 1-2, pp. 362–381, 2009. View at Publisher · View at Google Scholar · View at Scopus
  25. J. Rostami, “Hard rock TBM cutterhead modeling for design and performance prediction,” Geomechanics and Tunnelling, vol. 1, no. 1, pp. 18–28, 2008. View at Publisher · View at Google Scholar
  26. O. Arnau and C. Molins, “Three dimensional structural response of segmental tunnel linings,” Engineering Structures, vol. 44, pp. 210–221, 2012. View at Publisher · View at Google Scholar · View at Scopus
  27. H. Ligata, A. Kahraman, and A. Singh, “An experimental study of the influence of manufacturing errors on the planetary gear stresses and planet load sharing,” Journal of Mechanical Design, vol. 130, no. 4, Article ID 041701, 2008. View at Publisher · View at Google Scholar · View at Scopus