Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2019, Article ID 7497363, 12 pages
https://doi.org/10.1155/2019/7497363
Research Article

Ball Screw Fault Detection and Location Based on Outlier and Instantaneous Rotational Frequency Estimation

1Engineering Research Center of Advanced Driving Energy-saving Technology, Ministry of Education, Southwest Jiaotong University, Chengdu 610031, China
2School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China
3School of Information Science and Technology, Southwest Jiaotong University, Chengdu 610031, China

Correspondence should be addressed to Liang Guo; nc.ude.utjws@gnailoug

Received 12 March 2019; Revised 13 May 2019; Accepted 18 June 2019; Published 10 July 2019

Academic Editor: Emiliano Mucchi

Copyright © 2019 Liang Guo et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Lei, Intelligent Fault Diagnosis and Remaining Useful Life Prediction of Rotating Machinery, Butterworth-Heinemann, Oxford, UK, 2016.
  2. L. Guo, N. Li, F. Jia, Y. Lei, and J. Lin, “A recurrent neural network based health indicator for remaining useful life prediction of bearings,” Neurocomputing, vol. 240, pp. 98–109, 2017. View at Publisher · View at Google Scholar · View at Scopus
  3. Z. Wang, J. Zhou, J. Wang et al., “A novel fault diagnosis method of gearbox based on maximum kurtosis spectral entropy deconvolution,” IEEE Access, vol. 7, pp. 29520–29532, 2019. View at Publisher · View at Google Scholar
  4. E. A. Dias, F. B. Pereira, S. L. M. Ribeiro Filho, and L. C. Brandão, “Monitoring of through-feed centreless grinding processes with acoustic emission signals,” Measurement, vol. 94, pp. 71–79, 2016. View at Publisher · View at Google Scholar · View at Scopus
  5. J. Liu and Y. Shao, “Dynamic modeling for rigid rotor bearing systems with a localized defect considering additional deformations at the sharp edges,” Journal of Sound and Vibration, vol. 398, no. 23, pp. 84–102, 2017. View at Publisher · View at Google Scholar · View at Scopus
  6. W. Jin, Y. Chen, and J. Lee, “Methodology for ball screw component health assessment and failure analysis,” in Proceedings of the ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, American Society of Mechanical Engineers (ASME), Madison, WI, USA, June 2013.
  7. L. Zhang, H. Gao, J. Wen, S. Li, and Q. Liu, “A deep learning-based recognition method for degradation monitoring of ball screw with multi-sensor data fusion,” Microelectronics Reliability, vol. 75, pp. 215–222, 2017. View at Publisher · View at Google Scholar · View at Scopus
  8. P. C. Tsai, C. C. Cheng, and Y. C. Hwang, “Ball screw preload loss detection using ball pass frequency,” Mechanical Systems and Signal Processing, vol. 48, no. 1-2, pp. 77–91, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. G.-H. Feng and Y.-L. Pan, “Establishing a cost-effective sensing system and signal processing method to diagnose preload levels of ball screws,” Mechanical Systems and Signal Processing, vol. 28, pp. 78–88, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. C.-F. Han, H.-Q. He, C.-C. Wei et al., “Techniques developed for fault diagnosis of long-range running ball screw drive machine to evaluate lubrication condition,” Measurement, vol. 126, pp. 274–288, 2018. View at Publisher · View at Google Scholar · View at Scopus
  11. P. Li, X. Jia, J. Feng et al., “Prognosability study of ball screw degradation using systematic methodology,” Mechanical Systems and Signal Processing, vol. 109, pp. 45–57, 2018. View at Publisher · View at Google Scholar · View at Scopus
  12. Q. Wang and M. Lin, “Electromechanical coupling measurement of a new giant magnetostrictive structure for double-nut ball screw pre-tightening,” Measurement Science and Technology, vol. 27, no. 12, Article ID 125906, 2016. View at Publisher · View at Google Scholar · View at Scopus
  13. H. T. Feng, Y. L. Wang, C. M. Li, and W. J. Tao, “An automatic measuring method and system using a light curtain for the thread profile of a ballscrew,” Measurement Science and Technology, vol. 22, no. 8, Article ID 085106, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. L. Cui, J. Huang, and F. Zhang, “Quantitative and localization diagnosis of a defective ball bearing based on vertical-horizontal synchronization signal analysis,” IEEE Transactions on Industrial Electronics, vol. 64, no. 11, pp. 8695–8706, 2017. View at Publisher · View at Google Scholar · View at Scopus
  15. L. Guo, Y. Lei, S. Xin, T. Yan, and N. Li, “Deep convolutional transfer learning network: a new method for intelligent fault diagnosis of machines with unlabeled data,” IEEE Transactions on Industrial Electronics, vol. 66, no. 9, pp. 7316–7325, 2018. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Gupta, J. Gao, C. C. Aggarwal, and J. Han, “Outlier detection for temporal data: a survey,” IEEE Transactions on Knowledge and Data Engineering, vol. 26, no. 9, pp. 2250–2267, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. L. Guo, Y. Lei, N. Li, T. Yan, and N. Li, “Machinery health indicator construction based on convolutional neural networks considering trend burr,” Neurocomputing, vol. 292, pp. 142–150, 2018. View at Publisher · View at Google Scholar · View at Scopus
  18. Y. Wang, Y. Peng, Y. Zi, X. Jin, and K.-L. Tsui, “A two-stage data-driven-based prognostic approach for bearing degradation problem,” IEEE Transactions on Industrial Informatics, vol. 12, no. 3, pp. 924–932, 2016. View at Publisher · View at Google Scholar · View at Scopus
  19. F. Bonnardot, M. El Badaoui, R. B. Randall, J. Danière, and F. Guillet, “Use of the acceleration signal of a gearbox in order to perform angular resampling (with limited speed fluctuation),” Mechanical Systems and Signal Processing, vol. 19, no. 4, pp. 766–785, 2005. View at Publisher · View at Google Scholar · View at Scopus
  20. F. Combet and L. Gelman, “An automated methodology for performing time synchronous averaging of a gearbox signal without speed sensor,” Mechanical Systems and Signal Processing, vol. 21, no. 6, pp. 2590–2606, 2007. View at Publisher · View at Google Scholar · View at Scopus
  21. F. Combet and R. Zimroz, “A new method for the estimation of the instantaneous speed relative fluctuation in a vibration signal based on the short time scale transform,” Mechanical Systems and Signal Processing, vol. 23, no. 4, pp. 1382–1397, 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. J. Urbanek, T. Barszcz, and J. Antoni, “A two-step procedure for estimation of instantaneous rotational speed with large fluctuations,” Mechanical Systems and Signal Processing, vol. 38, no. 1, pp. 96–102, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. Z. Qiao and Z. Pan, “SVD principle analysis and fault diagnosis for bearings based on the correlation coefficient,” Measurement Science and Technology, vol. 26, no. 8, Article ID 085014, 2015. View at Publisher · View at Google Scholar · View at Scopus
  24. J. Antoni, “Fast computation of the kurtogram for the detection of transient faults,” Mechanical Systems and Signal Processing, vol. 21, no. 1, pp. 108–124, 2007. View at Publisher · View at Google Scholar · View at Scopus
  25. L. Stanković, I. Djurović, S. Stanković, M. Simeunović, S. Djukanović, and M. Daković, “Instantaneous frequency in time–frequency analysis: enhanced concepts and performance of estimation algorithms,” Digital Signal Processing, vol. 35, pp. 1–13, 2014. View at Publisher · View at Google Scholar · View at Scopus
  26. L. Guo, H. Gao, H. Huang, X. He, and S. Li, “Multifeatures fusion and nonlinear dimension reduction for intelligent bearing condition monitoring,” Shock and Vibration, vol. 2016, Article ID 4632562, 10 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  27. V. Climente-Alarcon, J. A. Antonino-Daviu, M. Riera-Guasp, and M. Vlcek, “Induction motor diagnosis by advanced notch FIR filters and the wigner-ville distribution,” IEEE Transactions on Industrial Electronics, vol. 61, no. 8, pp. 4217–4227, 2014. View at Publisher · View at Google Scholar · View at Scopus
  28. Y. Wang, G. Xu, Q. Zhang, D. Liu, and K. Jiang, “Rotating speed isolation and its application to rolling element bearing fault diagnosis under large speed variation conditions,” Journal of Sound and Vibration, vol. 348, pp. 381–396, 2015. View at Publisher · View at Google Scholar · View at Scopus
  29. S. Mann and S. Haykin, “The chirplet transform: a generalization of Gabor’s logon transform,” Vision Interface, vol. 91, pp. 205–212, 1991. View at Google Scholar
  30. S. Mann and S. Haykin, “Adaptive chirplet: an adaptive generalized wavelet-like transform,” Adaptive Signal Processing, vol. 1565, pp. 402–414, 1991. View at Google Scholar
  31. Y. Yang, Z. K. Peng, G. Meng, and W. M. Zhang, “Characterize highly oscillating frequency modulation using generalized Warblet transform,” Mechanical Systems and Signal Processing, vol. 26, pp. 128–140, 2012. View at Publisher · View at Google Scholar · View at Scopus
  32. Z. K. Peng, G. Meng, F. L. Chu, Z. Q. Lang, W. M. Zhang, and Y. Yang, “Polynomial chirplet transform with application to instantaneous frequency estimation,” IEEE Transactions on Instrumentation and Measurement, vol. 60, no. 9, pp. 3222–3229, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. Y. Yang, Z. K. Peng, G. Meng, and W. M. Zhang, “Spline-kernelled chirplet transform for the analysis of signals with time-varying frequency and its application,” IEEE Transactions on Industrial Electronics, vol. 59, no. 3, pp. 1612–1621, 2012. View at Publisher · View at Google Scholar · View at Scopus
  34. S. Mann and S. Haykin, “The chirplet transform: physical considerations,” IEEE Transactions on Signal Processing, vol. 43, no. 11, pp. 2745–2761, 1995. View at Publisher · View at Google Scholar · View at Scopus
  35. K. I. Rodopoulos and I. A. Antoniadis, “Instantaneous fault frequencies estimation in roller bearings via wavelet structures,” Journal of Sound and Vibration, vol. 383, pp. 446–463, 2016. View at Publisher · View at Google Scholar · View at Scopus