Research Article
Experimental Study of a Novel Ultrasonic Vibration-Assisted Structure for Radial Milling
Table 5
Single-factor experimental set.
| Case | Feed per tooth (μm) | Feed rate (mm/min) | Spindle speed (min−1) | Depth of cut (mm) | Amplitude (μm) |
| 1 | 6 | 36 | 2000 | 0.3 | 0 | 2 | 6 | 36 | 2000 | 0.3 | 10 | 3 | 6 | 36 | 2000 | 0.3 | 15 | 4 | 6 | 36 | 2000 | 0.3 | 20 | 5 | 6 | 36 | 2000 | 0.3 | 25 | 6 | 6 | 14.4 | 800 | 0.3 | 0 | 7 | 6 | 18 | 1000 | 0.3 | 0 | 8 | 6 | 27 | 1500 | 0.3 | 0 | 9 | 6 | 45 | 2500 | 0.3 | 0 | 10 | 6 | 14.4 | 800 | 0.3 | 15 | 11 | 6 | 18 | 1000 | 0.3 | 15 | 12 | 6 | 27 | 1500 | 0.3 | 15 | 13 | 6 | 45 | 2500 | 0.3 | 15 | 14 | 2 | 12 | 2000 | 0.3 | 0 | 15 | 4 | 24 | 2000 | 0.3 | 0 | 16 | 8 | 48 | 2000 | 0.3 | 0 | 17 | 10 | 60 | 2000 | 0.3 | 0 | 18 | 2 | 12 | 2000 | 0.3 | 15 | 19 | 4 | 24 | 2000 | 0.3 | 15 | 20 | 8 | 48 | 2000 | 0.3 | 15 | 21 | 10 | 60 | 2000 | 0.3 | 15 |
|
|