Research Article
Research on Formation Identification Based on Drilling Shock and Vibration Parameters and Energy Principle
Table 9
Drilling parameters of hole 2.
| Rock classification | Compressive strength (MPa) | Axial pressure (kN) | Rotation speed (rad) | Flushing fluid pressure (MPa) | Drilling rate (cm·min−1) | Torque (kN·m) |
| VI (fill) | 0.089 | 1.231 | 88 | 0.115 | 45.5 | 0.4026 | V | 0.758 | 1.593 | 122 | 0.088 | 39.8 | 0.5136 | V/IV | 13.37 | 2.136 | 96 | 0.169 | 22.9 | 0.8416 | IV (concrete) | 28.47 | 1.873 | 132 | 0.196 | 19.6 | 0.8106 | IV | 38.65 | 2.395 | 71 | 0.245 | 11.9 | 0.9687 | IV/III | 52.54 | 2.486 | 78 | 0.336 | 17.3 | 1.0312 | III | — | — | — | — | — | | III/II | 76.369 | 2.893 | 165 | 0.268 | 10.3 | 1.13621 | II | 99.163 | 5.425 | 278 | 0.361 | 4.9 | 1.4896 | II/I (vein) | 117.8 | 4.962 | 225 | 0.268 | 2.8 | 1.7169 |
|
|