Table of Contents
Scholarly Research Exchange
Volume 2008, Article ID 754838, 5 pages
http://dx.doi.org/10.3814/2008/754838
Research Article

Energy and Deformation during Explosive Compaction of ZrB2-SiC Ultrahigh Temperature Ceramics

1Center of Composite Materials, Harbin Institute of Technology, Harbin 150001, China
2School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney, Sydney, NSW 2006, Australia

Received 1 June 2008; Revised 24 June 2008; Accepted 21 July 2008

Copyright © 2008 Jin-Ping Li et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. M. Opeka, I. G. Talmy, and J. A. Zaykoski, “Oxidation-based materials selection for 2000C+ hypersonic aerosurfaces: theoretical considerations and historical experience,” Journal of Materials Science, vol. 39, no. 19, pp. 5887–5904, 2004. View at Publisher · View at Google Scholar
  2. S. R. Levine, E. J. Opila, M. C. Halbig, J. D. Kiser, M. Singh, and J. A. Salem, “Evaluation of ultrahigh temperature ceramics for aeropropulsion use,” Journal of the European Ceramic Society, vol. 22, no. 14-15, pp. 2757–2767, 2002. View at Publisher · View at Google Scholar
  3. M. Gasch, D. Ellerby, E. Irby, S. Beckman, M. Gusman, and S. Johnson, “Processing, properties and arc jet oxidation of hafnium diboride/silicon carbide ultrahigh temperature ceramics,” Journal of Materials Science, vol. 39, no. 19, pp. 5925–5937, 2004. View at Publisher · View at Google Scholar
  4. M. Belyansky and M. Trenary, “Comparison of the surface chemical reactivity of hafnium diboride and hafnium,” Inorganica Chimica Acta, vol. 289, no. 1-2, pp. 191–197, 1999. View at Publisher · View at Google Scholar
  5. L Kaufman and E. V. Clougherty, “Investigation of boride compounds for high temperature application,” ManLabs, Cambridge, Mass, USA, 1963. View at Google Scholar
  6. J.-P. Li, S.-J. Luo, Z.-H. Gong, W. Niu, and S. Ji, “Explosive compaction of CuCr alloys,” Transactions of Nonferrous Metals Society of China, vol. 12, no. 5, pp. 841–844, 2002. View at Google Scholar
  7. J.-P. Li, S.-H. Meng, and J.-C. Han, “Structure and flaws of CuCr alloys by explosive compaction,” Journal of Harbin Institute of Technology, vol. 12, no. 2, pp. 134–138, 2005. View at Google Scholar
  8. J.-X. Wang and X.-J. Li, “Explosive consolidation of powder and its application,” Powder Metallurgy Technology, vol. 22, no. 1, pp. 49–54, 2004 (Chinese). View at Google Scholar
  9. J.-P. Li, J.-C. Han, S.-H. Meng, X.-H. Zhang, and F.-J. Yi, “Study of the ZrB2-SiC ultrahigh temperature ceramics,” Journal of Harbin Institute of Technology, vol. 37, pp. 123–125, 2005 (Chinese). View at Google Scholar
  10. J.-P. Li, S.-H. Meng, J.-C. Han, F.-J. Yi, and C.-H. Xu, “Study of two-particle softening ZrB2 ceramic matrix composites,” Journal of Harbin Institute of Technology, vol. 37, no. 6, pp. 727–729, 2005 (Chinese). View at Google Scholar
  11. A. A. Hegazy and T. Z. Blazynski, “Some aspects of shock consolidation of polymeric, PVC-metallic and PVC-silica powder mixtures,” Journal of Materials Science, vol. 21, no. 12, pp. 4262–4268, 1986. View at Publisher · View at Google Scholar
  12. A. A. Hegazy and T. Z. Blazynski, “Energy and deformation in implosive compression of axisymmetrical metal cylinders,” International Journal of Impact Engineering, vol. 6, no. 1, pp. 63–72, 1987. View at Publisher · View at Google Scholar
  13. J.-P. Li, S.-J. Luo, S. Ji, W. Niu, Z.-M. Chen, and Z.-H. Gong, “Energy and deformation in explosive compaction with axisymmetrical steel tubes,” Ordnance Material Science and Engineering, vol. 25, no. 5, pp. 48–51, 2002 (Chinese). View at Google Scholar
  14. S.-J. Luo, “Energy and deformation during explosive compaction of CuCr alloys,” Materials Science and Technology, vol. 12, no. 2, pp. 117–120, 2004 (Chinese). View at Google Scholar
  15. T. Z. Blazynski, Explosive Welding, Forming and Pressing, Chinese Mechanical Industry Press, Beijing, China, 1988.