Table of Contents
Scholarly Research Exchange
Volume 2009, Article ID 324572, 9 pages
http://dx.doi.org/10.3814/2009/324572
Research Article

Simulation of Weld Bead Geometry in GTA Welded Duplex Stainless Steel (DSS)

Department of Production Engineering, National Institute of Technology, Tiruchirappalli 620 015, Tamil Nadu, India

Received 21 August 2008; Revised 24 April 2009; Accepted 16 June 2009

Copyright © 2009 P. Sathiya et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. A. David and T. DebRoy, “Current issues and problems in welding science,” Science, vol. 257, no. 5069, pp. 497–502, 1992. View at Google Scholar
  2. T. DebRoy and S. A. David, “Physical processes in fusion welding,” Reviews of Modern Physics, vol. 67, no. 1, pp. 85–112, 1995. View at Publisher · View at Google Scholar
  3. T. Zacharia, J. M. Vitek, J. A. Goldak, T. DebRoy, M. Rappaz, and H. K. D. H. Bhadeshia, “Modeling of fundamental phenomena in welds,” Modelling and Simulation in Materials Science and Engineering, vol. 3, no. 2, pp. 265–288, 1995. View at Publisher · View at Google Scholar
  4. V. J. Papazoglou and K. Masubuchi, “Numerical analysis of thermal stresses during welding including phase transformation effects,” Journal of Pressure Vessel Technology, vol. 104, no. 3, pp. 198–203, 1982. View at Google Scholar
  5. J. N. Reddy, “On penalty function methods in the finite element analysis of flow problems,” International Journal for Numerical Methods, vol. 2, no. 2, pp. 151–171, 1982. View at Google Scholar
  6. J. T. Oden, N. Kikuchi, and Y. J. Song, “Penalty-finite element methods for the analysis of stokesian flows,” Computer Methods in Applied Mechanics and Engineering, vol. 31, no. 3, pp. 297–329, 1982. View at Google Scholar
  7. R. McLay and G. F. Carey, “Coupled heat transfer and viscous flow, and magnetic effects in weld pool analysis,” International Journal for Numerical Methods in Fluids, vol. 9, no. 6, pp. 713–730, 1989. View at Google Scholar
  8. A. De and T. DebRoy, “Probing unknown welding parameters from convective heat transfer calculation and multivariable optimization,” Journal of Physics D, vol. 37, no. 1, pp. 140–150, 2004. View at Publisher · View at Google Scholar
  9. W. H. Giedt, X.-C. Wei, and S.-R. Wei, “Effect of surface convection on stationary GTA weld zone temperatures,” Welding Journal, vol. 63, no. 12, pp. 376s–383s, 1984. View at Google Scholar
  10. W. E. Lukens and R. A. Morris, “Infrared temperature sensing of cooling rates for arc welding control,” Welding Journal, vol. 61, no. 1, pp. 27–33, 1982. View at Google Scholar
  11. R. Kovacevic, Y. M. Zhang, and S. Ruan, “Sensing and control of weld pool geometry for automated GTA welding,” Journal of Engineering for Industry, vol. 117, no. 2, pp. 210–222, 1995. View at Google Scholar
  12. W. Pitscheneder, R. Ebner, T. Hong, T. DebRoy, K. Mundra, and R. Benes, “Development of a finite element based heat transfer model for conduction mode laser spot welding process using an adaptive volumetric heat source,” in Proceedings of the 4th International Seminar on Numerical Analysis of Weldability, pp. 379–395, Graz-Seggau, Austria, September 1997.
  13. D. Rosenthal, “Mathematical theory of heat distribution during welding and cutting,” Welding Journal, vol. 20, no. 5, pp. 220–234, 1941. View at Google Scholar
  14. V. Pavelic, R. Tanabakuchi, O. A. Uyehara, and P. S. Myers, “Experimental and computed temperature histories in gas tungsten arc welding of thin plates,” Welding Journal, vol. 48, no. 7, pp. 295s–305s, 1969. View at Google Scholar
  15. J. Goldak, A. Chakravarti, and M. Bibby, “A new finite element model for welding heat sources,” Metallurgical Transactions B, vol. 15, no. 2, pp. 299–305, 1984. View at Publisher · View at Google Scholar
  16. S. H. Kang and H. S. Chos, “Analytical solution for transient temperature distribution in gas tungsten arc welding with consideration of filler wire,” Proceedings of the Institution of Mechanical Engineers, Part B, vol. 213, no. 8, pp. 799–811, 1999. View at Google Scholar
  17. W. Guo and A. Kar, “Determination of weld pool shape and temperature distribution by solving three-dimensional phase change heat conduction problem,” Science and Technology of Welding and Joining, vol. 5, no. 5, pp. 317–323, 2000. View at Google Scholar
  18. W. S. Chang and S. J. Na, “A study on the prediction of the laser weld shape with varying heat source equations and the thermal distortion of a small structure in micro-joining,” Journal of Materials Processing Technology, vol. 120, no. 1–3, pp. 208–214, 2002. View at Publisher · View at Google Scholar
  19. P. Dutta, Y. Joshi, and C. Franche, “Determination of gas tungsten arc welding efficiencies,” Experimental Thermal and Fluid Science, vol. 9, no. 1, pp. 80–89, 1994. View at Google Scholar
  20. M. R. Frewin and D. A. Scott, “Finite element model of pulsed laser welding,” Welding Journal, vol. 78, no. 1, pp. 15s–22s, 1999. View at Google Scholar
  21. A. De, C. A. Walsh, S. K. Maiti, and H. K. D. H. Bhadeshia, “Prediction of cooling rate and microstructure in laser spot welds,” Science and Technology of Welding and Joining, vol. 8, no. 6, pp. 391–399, 2003. View at Publisher · View at Google Scholar
  22. W. Zhang, G. G. Roy, J. W. Elmer, and T. DebRoy, “Modeling of heat transfer and fluid flow during gas tungsten arc spot welding of low carbon steel,” Journal of Applied Physics, vol. 93, no. 5, pp. 3022–3033, 2003. View at Publisher · View at Google Scholar
  23. X. He, P. W. Fuerschbach, and T. DebRoy, “Heat transfer and fluid flow during laser spot welding of 304 stainless steel,” Journal of Physics D, vol. 36, no. 12, pp. 1388–1398, 2003. View at Publisher · View at Google Scholar
  24. W. Zhang, G. G. Roy, J. W. Elmer, and T. DebRoy, “Modeling of heat transfer and fluid flow during GTA spot welding of 1005 steel,” Journal of Applied Physics, vol. 93, pp. 3022–3033, 2003. View at Google Scholar
  25. A. Kumar and T. DebRoy, “Calculation of three-dimensional electromagnetic force field during arc welding,” Journal of Applied Physics, vol. 94, no. 2, pp. 1267–1277, 2003. View at Publisher · View at Google Scholar
  26. A. De and T. DebRoy, “A smart model to estimate effective thermal conductivity and viscosity in the weld pool,” Journal of Applied Physics, vol. 95, no. 9, pp. 5230–5240, 2004. View at Publisher · View at Google Scholar
  27. S. Mishra and T. DebRoy, “A heat-transfer and fluid-flow-based model to obtain a specific weld geometry using various combinations of welding variables,” Journal of Applied Physics, vol. 98, no. 4, Article ID 044902, 10 pages, 2005. View at Publisher · View at Google Scholar
  28. S. Mishra and T. DebRoy, “A computational procedure for finding multiple solutions of convective heat transfer equations,” Journal of Physics D, vol. 38, no. 16, pp. 2977–2985, 2005. View at Publisher · View at Google Scholar