Table of Contents
Scholarly Research Exchange
Volume 2009 (2009), Article ID 797068, 6 pages
http://dx.doi.org/10.3814/2009/797068
Research Article

Wide-Beam X-Ray Source Target Thermal Management Simulation Using Inner Jet Cooling

Department of Nuclear Engineering, College of Engineering, North Carolina State University, Raleigh, NC 27695-7909, USA

Received 15 June 2008; Accepted 5 January 2009

Copyright © 2009 Chang H. Kim et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. H. Kim, M. A. Bourham, and J. M. Doster, “A wide-beam X-ray source suitable for diffraction enhanced imaging applications,” Nuclear Instruments and Methods in Physics Research Section A, vol. 566, no. 2, pp. 713–721, 2006. View at Publisher · View at Google Scholar
  2. D. Chapman, W. Thomlinson, R. E. Johnston et al., “Diffraction enhanced X-ray imaging,” Physics in Medicine and Biology, vol. 42, no. 11, pp. 2015–2025, 1997. View at Publisher · View at Google Scholar
  3. Z. Zhong, W. Thomlinson, D. Chapman, and D. Sayers, “Implementation of diffraction-enhanced imaging experiments: at the NSLS and APS,” Nuclear Instruments and Methods in Physics Research Section A, vol. 450, no. 2-3, pp. 556–567, 2000. View at Publisher · View at Google Scholar
  4. J. T. Bushberg, J. A. Seibert, E. M. Leidholdt, Jr., and J. M. Boone, The Essential Physics of Medical Imaging, Lippincott Williams & Wilkins, Baltimore, Md, USA, 2nd edition, 2002.
  5. J. Selman, The Fundamentals of Imaging Physics and Radiobiology, Chares C Thomas, Springfield, Ill USA, 2000.
  6. CFX®, Version 10.0, User Manual, ANSYS, Inc.
  7. H. Martin, “Heat and mass transfer between impinging gas jets and solid surfaces,” Advanced Heat Transfer, vol. 13, pp. 1–60, 1977. View at Publisher · View at Google Scholar
  8. A. F. Mills, Heat Transfer, Prentice Hall, Upper Saddle River, NJ, USA, 2nd edition, 1999.
  9. K. Jambunathan, E. Lai, M. A. Moss, and B. L. Button, “A review of heat transfer data for single circular jet impingement,” International Journal of Heat and Fluid Flow, vol. 13, no. 2, pp. 106–115, 1992. View at Publisher · View at Google Scholar
  10. D. H. Lee, J. Song, and M. C. Jo, “The effects of nozzle diameter on impinging jet heat transfer and fluid flow,” Journal of Heat Transfer, vol. 126, no. 4, pp. 554–557, 2004. View at Publisher · View at Google Scholar
  11. R. Viskanta, “Heat transfer to impinging isothermal gas and flame jets,” Experimental Thermal and Fluid Science, vol. 6, no. 2, pp. 111–134, 1993. View at Publisher · View at Google Scholar
  12. Z.-H. Liu, T.-F. Tong, and Y.-H. Qiu, “Critical heat flux of steady boiling for subcooled water jet impingement on the flat stagnation zone,” Journal of Heat Transfer, vol. 126, no. 2, pp. 179–183, 2004. View at Publisher · View at Google Scholar
  13. M. Monde, K. Kitajima, T. Inoue, and Y. Mitsutake, “Critical heat flux in a forced convective subcooled boiling with an impinging jet,” Heat Transfer, vol. 7, pp. 515–520, 1994. View at Google Scholar
  14. Y. Mitsutake and M. Monde, “Ultra high critical heat flux during forced flow boiling heat transfer with an impinging jet,” Journal of Heat Transfer, vol. 125, no. 6, pp. 1038–1045, 2003. View at Publisher · View at Google Scholar
  15. C. H. Kim, A study of an areas X-ray source for diffraction enhanced imaging for clinical and industrial application, M.S. thesis, NC State University, Raleigh, NC, USA, August 2004.
  16. Solidworks® 3D CAD, User's Guide, Solidworks Corporation, 2007.
  17. ICEM CFD®, Version 5.1, User Manual, ANSYS, Inc.
  18. C. H. Kim, A study of monochromatic X-ray area beam for application in diffraction enhanced imaging, Ph.D. dissertation, NC State University, Raleigh, NC, USA, August 2007.