Table of Contents
Texture of Crystalline Solids
Volume 3 (1978), Issue 1, Pages 53-72
http://dx.doi.org/10.1155/TSM.3.53

Effect of Carbide Size, Cold Reduction and Heating Rate in Annealing on Deep-Drawability of Low-Carbon, Capped Cold-Rolled Steel Sheet

Fukuyama Research Laboratories, Technical Research Center, Nippon Kokan K.K., Hiroshima 721, Japan

Received 27 October 1977

Copyright © 1978 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Kazuo Matsudo, Takayoshi Shimomura, and Osamu Nozoe, “Effect of Carbide Size, Cold Reduction and Heating Rate in Annealing on Deep-Drawability of Low-Carbon, Capped Cold-Rolled Steel Sheet,” Texture of Crystalline Solids, vol. 3, no. 1, pp. 53-72, 1978. doi:10.1155/TSM.3.53