Jerzy Jura, Jan Pospiech, "The Determination of Orientation Distribution Function From Incomplete Pole Figures - an Example of a Computer Program", Texture, Stress, and Microstructure, vol. 3, Article ID 615672, 25 pages, 1978. https://doi.org/10.1155/TSM.3.1
The Determination of Orientation Distribution Function From Incomplete Pole Figures - an Example of a Computer Program
The use of incomplete pole figure data for defining the orientation distribution function (ODF) in a polycrystalline material is of great practical importance, because it enables the use of experimental data from a simplified measurement. The present paper provides the source text of a computer program for calculating the coefficients of ODF series expansion, . The data for computations are in the incomplete pole figures of rhombic symmetry as determined by the back reflection or transmission technique for crystalline solids of the cubic system. Also described is the numerical method of determining the coefficients , and the results so obtained are discussed.
Copyright © 1978 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.