Table of Contents 
Texture of Crystalline Solids
Volume 3 (1979), Issue 4, Pages 245-254
http://dx.doi.org/10.1155/TSM.3.245

Analysis of Orientation Distribution Plots Obtained With the Vector Method for Cubic Polycrystals

D. Ruer, A. Vadon, and R. Baro

Laboratoire de Métallurgie Structurale, Faculté des Sciences, Metz 57000, France

Copyright © 1979 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

The choice of the particular angular parameters (Ψ,ω,ζ) used in the vector method of texture analysis is justified and the relstionships for expressing any ideal orientation (Ψ,ω,ζ) in terms of (hkl) [uvw] and vice versa are given. Examples of orientation distribution are presented with constant sections of each of the three angular parameters.