Table of Contents
Texture of Crystalline Solids
Volume 4, Issue 3, Pages 159-169
http://dx.doi.org/10.1155/TSM.4.159

A Method for Obtaining the Complete Pole Figure With a Single Sample Using the Schulz Technique

Comisión Nacional de Energía Atómica, Departamento de Materiales, Buenos Aires 1429, Argentina

Received 18 August 1980

Copyright © 1981 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

A theoretical expression, which alIows the diffracted intensities to be corrected for defocusing, is derived from the convolution over the geometrical defocusing width of a diffraction peak fitted by a Cauchy function. Alignment errors are taken into account, and a good agreement between theoretical curves and experimental points is established.