Table of Contents
Textures and Microstructures
Volume 7, Issue 4, Pages 265-301
http://dx.doi.org/10.1155/TSM.7.265

Role of Twinning in Texture Development and in Plastic Deformation of Hexagonal Materials

1Laboratoire de Métallurgie des Materiaux Polycristallins, UER Sciences, Metz Cedex 01 F-57045, France
2Laboratoire de Métallurgie CNAM, 292 rue St Martin, Paris Cedex F-75141, France

Received 20 June 1987; Accepted 4 December 1987

Copyright © 1988 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [47 citations]

The following is the list of published articles that have cited the current article.

  • J.J. Fundenberger, M.J. Philippe, and C. Esling, “Mechanical twinning at high temperatures in some hexagonal alloys,” Scripta Metallurgica et Materialia, vol. 24, no. 7, pp. 1215–1220, 1990. View at Publisher · View at Google Scholar
  • C.N. Tomé, R.A. Lebensohn, and U.F. Kocks, “A model for texture development dominated by deformation twinning: Application to zirconium alloys,” Acta Metallurgica et Materialia, vol. 39, no. 11, pp. 2667–2680, 1991. View at Publisher · View at Google Scholar
  • J.D. Picksley, F.R. Hall, and I. Pillinger, “Metal forming of titanium: Experimentation, microstructure and computer simulation,” Journal of Materials Processing Technology, vol. 45, no. 1-4, pp. 491–496, 1994. View at Publisher · View at Google Scholar
  • M.J. Philippe, F. Wagner, F.E. Mellab, C. Esling, and J. Wegria, “Modelling of texture evolution for materials of hexagonal symmetry—I. Application to zinc alloys,” Acta Metallurgica et Materialia, vol. 42, no. 1, pp. 239–250, 1994. View at Publisher · View at Google Scholar
  • M.J. Philippe, M. Serghat, P. Van Houtte, and C. Esling, “Modelling of texture evolution for materials of hexagonal symmetry—II. application to zirconium and titanium α or near α alloys,” Acta Metallurgica et Materialia, vol. 43, no. 4, pp. 1619–1630, 1995. View at Publisher · View at Google Scholar
  • R.A. Lebensohn, M.I. González, C.N. Tomé, and A.A. Pochettino, “Measurement and prediction of texture development during a rolling sequence of Zircaloy-4 tubes,” Journal of Nuclear Materials, vol. 229, pp. 57–64, 1996. View at Publisher · View at Google Scholar
  • J.J. Fundenberger, M.J. Philippe, F. Wagner, and C. Esling, “Modelling and prediction of mechanical properties for materials with hexagonal symmetry (zinc, titanium and zirconium alloys),” Acta Materialia, vol. 45, no. 10, pp. 4041–4055, 1997. View at Publisher · View at Google Scholar
  • R Logé, “Sensitivity of α-Zy4 high-temperature deformation textures to the β-quenched precipitate structure and to recrystallization: application to hot extrusion,” Acta Materialia, vol. 48, no. 15, pp. 3917–3930, 2000. View at Publisher · View at Google Scholar
  • Sergey Myagchilov, and Paul R Dawson, “Evolution of texture in aggregates of crystals exhibiting both slip and twinning,” Modelling and Simulation in Materials Science and Engineering, vol. 7, no. 6, pp. 975–1004, 2000. View at Publisher · View at Google Scholar
  • A.K. Singh, and R.A. Schwarzer, “Evolution of cold rolling texture in the binary alloys: Ti–0.4Mn and Ti–1.8Mn,” Materials Science and Engineering: A, vol. 307, no. 1-2, pp. 151–157, 2001. View at Publisher · View at Google Scholar
  • A.K Singh, and R.A Schwarzer, “Effect of mode of deformation by rolling on the development of texture in binary Ti-Mn alloys,” Scripta Materialia, vol. 44, no. 2, pp. 375–380, 2001. View at Publisher · View at Google Scholar
  • S Zaefferer, “A study of active deformation systems in titanium alloys: dependence on alloy composition and correlation with deformation texture,” Materials Science and Engineering: A, vol. 344, no. 1-2, pp. 20–30, 2003. View at Publisher · View at Google Scholar
  • Stefan Zaefferer, “Computer-aided crystallographic analysis in the TEM,” vol. 125, pp. 355–XII, 2003. View at Publisher · View at Google Scholar
  • Y.B. Chun, S.H. Yu, S.L. Semiatin, and S.K. Hwang, “Effect of deformation twinning on microstructure and texture evolution during cold rolling of CP-titanium,” Materials Science and Engineering: A, vol. 398, no. 1-2, pp. 209–219, 2005. View at Publisher · View at Google Scholar
  • Robert Gehrmann, Matthias M. Frommert, and Günter Gottstein, “Texture effects on plastic deformation of magnesium,” Materials Science and Engineering: A, vol. 395, no. 1-2, pp. 338–349, 2005. View at Publisher · View at Google Scholar
  • T. Dick, and G. Cailletaud, “Fretting modelling with a crystal plasticity model of Ti6Al4V,” Computational Materials Science, vol. 38, no. 1, pp. 113–125, 2006. View at Publisher · View at Google Scholar
  • M.R. Barnett, “Twinning and the ductility of magnesium alloys,” Materials Science and Engineering: A, vol. 464, no. 1-2, pp. 1–7, 2007. View at Publisher · View at Google Scholar
  • F. Xu, R.A. Holt, and M.R. Daymond, “Modeling lattice strain evolution during uniaxial deformation of textured Zircaloy-2,” Acta Materialia, vol. 56, no. 14, pp. 3672–3687, 2008. View at Publisher · View at Google Scholar
  • F. Xu, R.A. Holt, and M.R. Daymond, “Evidence for basal 〈a〉-slip in Zircaloy-2 at room temperature from polycrystalline modeling,” Journal of Nuclear Materials, vol. 373, no. 1-3, pp. 217–225, 2008. View at Publisher · View at Google Scholar
  • S. Banumathy, R.K. Mandal, and A.K. Singh, “Texture and anisotropy of a hot rolled Ti–16Nb alloy,” Journal of Alloys and Compounds, vol. 500, no. 2, pp. L26–L30, 2010. View at Publisher · View at Google Scholar
  • Olaf Engler, and Valerie Randle, “References,” Introduction to Texture Analysis, pp. 411–430, 2010. View at Publisher · View at Google Scholar
  • Claude Esling, Lei Bao, Jean-Sébastien Lecomte, Christophe Schuman, Marie-Jeanne Philippe, and Xiang Zhao, “Study of Plastic Deformation in Hexagonal Metals by Interrupted In-Situ EBSD Measurement,” Advanced Engineering Materials, vol. 12, no. 10, pp. 1053–1059, 2010. View at Publisher · View at Google Scholar
  • Lei Bao, Christophe Schuman, Jean-Sébastien Lecomte, Marie-Jeanne Philippe, Xiang Zhao, and Claude Esling, “A Study of Twin Variant Selection and Twin Growth in Titanium,” Advanced Engineering Materials, vol. 13, no. 10, pp. 928–932, 2011. View at Publisher · View at Google Scholar
  • Christophe Schuman, Lei Bao, Jean Sébastien Lecomte, Yudong Zhang, Jean Marc Raulot, Marie Jeanne Philippe, and Claude Esling, “A New Variant Selection Criterion for Twin Variants in Titanium Alloys (Part 1),” Advanced Engineering Materials, vol. 13, no. 12, pp. 1114–1121, 2011. View at Publisher · View at Google Scholar
  • Yunchang Xin, Maoyin Wang, Zhen Zeng, Guangjie Huang, and Qing Liu, “Tailoring the texture of magnesium alloy by twinning deformation to improve the rolling capability,” Scripta Materialia, vol. 64, no. 10, pp. 986–989, 2011. View at Publisher · View at Google Scholar
  • S. Banumathy, R. K. Mandal, and A. K. Singh, “Hot rolling of binary Ti–Nb alloys Part II: mechanical properties anisotropy,” International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), vol. 102, no. 02, pp. 208–217, 2011. View at Publisher · View at Google Scholar
  • S. Wang, C. Schuman, L. Bao, J.S. Lecomte, Y. Zhang, J.M. Raulot, M.J. Philippe, X. Zhao, and C. Esling, “Variant selection criterion for twin variants in titanium alloys deformed by rolling,” Acta Materialia, vol. 60, no. 9, pp. 3912–3919, 2012. View at Publisher · View at Google Scholar
  • Yudong Zhang, Jean Marc Raulot, Marie Jeanne Philippe, Claude Esling, Christophe Schuman, Lei Bao, and Jean Sébastien Lecomte, “A New Variant Selection Criterion for Twin Variants in Titanium Alloys (Part 2),” Advanced Engineering Materials, vol. 14, no. 5, pp. 304–311, 2012. View at Publisher · View at Google Scholar
  • A. K. Singh, and R. A. Schwarzer, “Evolution of texture during thermomechanical processing of titanium and its alloys,” Transactions of the Indian Institute of Metals, vol. 61, no. 5, pp. 371–387, 2012. View at Publisher · View at Google Scholar
  • Lei Bao, Yudong Zhang, Christophe Schuman, Jean-Sébastien Lecomte, Marie-Jeanne Philippe, Xiang Zhao, and Claude Esling, “Multiple twinning in pure hexagonal close-packed titanium,” Journal of Applied Crystallography, vol. 46, no. 5, pp. 1397–1406, 2013. View at Publisher · View at Google Scholar
  • Arnas Fitzner, D.G. Leo Prakash, Joao Quinta da Fonseca, Michael Preuss, Matthew J. Thomas, Shu Yan Zhang, and Joe Kelleher, “The Effect of Aluminium on Deformation and Twinning in Alpha Titanium: The 45° Case,” Materials Science Forum, vol. 765, pp. 549–553, 2013. View at Publisher · View at Google Scholar
  • B.L. Wu, G. Wan, X.H. Du, Y.D. Zhang, F. Wagner, and C. Esling, “The quasi-static mechanical properties of extruded binary Mg–Er alloys,” Materials Science and Engineering: A, vol. 573, pp. 205–214, 2013. View at Publisher · View at Google Scholar
  • Z.Y. Song, Q.Y. Sun, L. Xiao, J. Sun, L.C. Zhang, X.D. Guo, and X.D. Li, “Age hardening and its modeling of Ti–2.5Cualloy,” Materials Science and Engineering: A, vol. 568, pp. 118–122, 2013. View at Publisher · View at Google Scholar
  • X Li, G F Xu, X Y Peng, L G Zhang, X W Wang, and Z Li, “Dependence of twinning on matrix orientation in tensile deformed commercial purity titanium,” Materials Science and Technology, vol. 29, no. 6, pp. 754–758, 2013. View at Publisher · View at Google Scholar
  • David E Cipoletti, Allan F Bower, and Paul E Krajewski, “Anisotropy in plastic deformation of extruded magnesium alloy sheet during tensile straining at high temperature,” Integrating Materials and Manufacturing Innovation, vol. 2, no. 1, pp. 4, 2013. View at Publisher · View at Google Scholar
  • B Alili, D Bradai, B Mehdi, H Azzeddine, R Badji, and V Ji, “Characterization of the deformation texture after tensile test and cold rolling of a Ti-6Al-4V sheet alloy,” IOP Conference Series: Materials Science and Engineering, vol. 82, pp. 012018, 2015. View at Publisher · View at Google Scholar
  • Shiwei Pan, Yunchang Xin, Guangjie Huang, Qi Li, Feilong Guo, and Qing Liu, “Tailoring the texture and mechanical anisotropy of a Mg-2Zn-2Gd plate by varying the rolling path,” Materials Science and Engineering: A, 2015. View at Publisher · View at Google Scholar
  • Qi Chao, Peter D. Hodgson, and Hossein Beladi, “Microstructure and Texture Evolution During Symmetric and Asymmetric Rolling of a Martensitic Ti-6Al-4V Alloy,” Metallurgical and Materials Transactions A, 2015. View at Publisher · View at Google Scholar
  • Huihui Nie, Wei Liang, Fuqian Yang, Liuwei Zheng, Xianrong Li, and Haiwei Fan, “Texture Evolution of Single-Pass Hot-Rolled 5052/AZ31/5052 Clad Sheets,” Jom, 2016. View at Publisher · View at Google Scholar
  • Bingfeng Wang, Xiaoyan Wang, and Juan Li, “Formation and Microstructure of Ultrafine-Grained Titanium Processed by Multi-Directional Forging,” Journal of Materials Engineering and Performance, 2016. View at Publisher · View at Google Scholar
  • Liang Liang, and Olivier B.M. Hardouin Duparc, “First-principles study of four mechanical twins and their deformation along the c-axis in pure α-titanium and in titanium in presence of oxygen and hydrogen,” Acta Materialia, vol. 110, pp. 258–267, 2016. View at Publisher · View at Google Scholar
  • Arnas Fitzner, D.G. Leo Prakash, Joao Quinta da Fonseca, Matthew Thomas, Shu-Yan Zhang, Joe Kelleher, Pascal Manuel, and Michael Preuss, “The effect of aluminium on twinning in binary alpha-titanium,” Acta Materialia, vol. 103, pp. 341–351, 2016. View at Publisher · View at Google Scholar
  • Devasri Fuloria, Nikhil Kumar, R. Jayaganthan, S.K. Jha, and D. Srivastava, “An investigation of effect of annealing at different temperatures on microstructures and bulk textures development in deformed Zircaloy-4,” Materials Characterization, vol. 129, pp. 217–233, 2017. View at Publisher · View at Google Scholar
  • Devasri Fuloria, Nikhil Kumar, R. Jayaganthan, S.K. Jha, and D. Srivastava, “Microstructural and textural characterization of Zircaloy-4 processed by rolling at different temperatures,” Materials Characterization, 2017. View at Publisher · View at Google Scholar
  • Atasi Ghosh, Amit Singh, and N.P. Gurao, “Effect of rolling mode and annealing temperature on microstructure and texture of commercially pure-titanium,” Materials Characterization, 2017. View at Publisher · View at Google Scholar
  • Shiwei Pan, Xinde Huang, Yunchang Xin, Guangjie Huang, Qi Li, Chaolan Tan, and Qing Liu, “The effect of hot rolling regime on texture and mechanical properties of an as-cast Mg–2Zn–2Gd plate,” Materials Science and Engineering: A, 2018. View at Publisher · View at Google Scholar
  • B.D. Bishoyi, R.K. Sabat, and S.K. Sahoo, “Effect of Temperature on Microstructure and Texture Evolutions during Uniaxial Compression of Commercially Pure Titanium,” Materials Science and Engineering: A, 2018. View at Publisher · View at Google Scholar