Texture, Stress, and Microstructure

Texture, Stress, and Microstructure / 1990 / Article

Open Access

Volume 12 |Article ID 579807 | https://doi.org/10.1155/TSM.12.37

M. Sindel, G. D. Köhlhoff, K. Lücke, B. J. Duggan, "Development of Cube Texture in Coarse Grained Copper", Texture, Stress, and Microstructure, vol. 12, Article ID 579807, 10 pages, 1990. https://doi.org/10.1155/TSM.12.37

Development of Cube Texture in Coarse Grained Copper

Received18 Jan 1989
Accepted03 Feb 1989


Cube oriented deformed material has been detected in the rolling texture measured on edge sections of heavily rolled coarse grained copper. The level of intensity is low, and seems to be independent of rolling reduction over the range 93–98%. Recrystallization textures show an increasing strength of Cube with rolling reduction. The evidence is consistent with the idea that Cube nuclei are created by a mechanism similar to that proposed by Dillamore and Katoh, and the strength of the recrystallized Cube texture depends on oriented growth. Prior grain size effects are briefly examined and it is shown that deformation textures are less sharp in large grain size compared with small grain sized copper at similar strains. It is likely that the effect of grain size on cube texture formation arises from grain size dependent texture changes in the vicinity of the deformed Cube oriented material.

Copyright © 1990 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Related articles

No related content is available yet for this article.
 PDF Download Citation Citation
 Order printed copiesOrder

Article of the Year Award: Outstanding research contributions of 2021, as selected by our Chief Editors. Read the winning articles.