Table of Contents
Textures and Microstructures
Volume 14–18

Reference ODF Calculations for the Torsion of FCC Rate Sensitive Polycrystals

1Laboratoire de mécanique et technologie, Ecole normale supérieure de Cachan, CNRS, Université Paris VI, 61 Av. Président Wilson, 94230 Cachan, France
2Institute for General Physics, Eötvös University, P.O.B. 323, Budapest 1445, Hungary
3Department of Metallurgical Engineering, McGill University, 3450 University Street, Montreal H3A 2A7, Canada

Copyright © 1991 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


analytic calculations are presented for the deformation induced ODF in a sheared FCC polycrystal. The uniform strain (Taylor) hypothesis and the theory of rate dependent slip are used. The fibre considered contains three interesting ideal orientations, and periodic ODF variations are observed. The present predictions, which can be readily and rapidly obtained, are useful for testing computer codes for the simulation of large deformation textures.