Table of Contents
Textures and Microstructures
Volume 14–18
http://dx.doi.org/10.1155/TSM.14-18.757

Two-Dimensional Computer Modelling of Polycrystalline Film Growth

DIMES / Section Submicron Technology, Laboratory of Applied Physics, Delft University of Technology, P.O. Box 5046, 2600 GA Delft, Netherlands Antilles

Copyright © 1991 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [19 citations]

The following is the list of published articles that have cited the current article.

  • Paul Meakin, “The growth of rough surfaces and interfaces,” Physics Reports, vol. 235, no. 4-5, pp. 189–289, 1993. View at Publisher · View at Google Scholar
  • Li Cheng-Zhang, J.C. Lodder, and J.A. Szpunar, “The influence of the textural development on magnetic properties in Co-Cr thin films,” Journal of Magnetism and Magnetic Materials, vol. 131, no. 3, pp. 427–439, 1994. View at Publisher · View at Google Scholar
  • Giovanni Russo, and Peter Smereka, “A Level-Set Method for the Evolution of Faceted Crystals,” SIAM Journal on Scientific Computing, vol. 21, no. 6, pp. 2073–2095, 2000. View at Publisher · View at Google Scholar
  • U Schulz, and M Schmücker, “Microstructure of ZrO2 thermal barrier coatings applied by EB-PVD,” Materials Science and Engineering: A, vol. 276, no. 1-2, pp. 1–8, 2000. View at Publisher · View at Google Scholar
  • Corbett C. Battaile, and David J. Srolovitz, “ K INETIC M ONTE C ARLO S IMULATION OF C HEMICAL V APOR D EPOSITION ,” Annual Review of Materials Research, vol. 32, no. 1, pp. 297–319, 2002. View at Publisher · View at Google Scholar
  • N. N. Iosad, N. M. van der Pers, S. Grachev, V. V. Roddatis, B. D. Jackson, S. N. Polyakov, P. N. Dmitriev, and T. M. Klapwijk, “Texture formation in sputter-deposited (Nb[sub 0.7],Ti[sub 0.3])N thin films,” Journal of Applied Physics, vol. 92, no. 9, pp. 4999, 2002. View at Publisher · View at Google Scholar
  • Peter Smereka, Xingquan Li, Giovanni Russo, and D.J. Srolovitz, “Simulation of faceted film growth in three dimensions: microstructure, morphology and texture,” Acta Materialia, vol. 53, no. 4, pp. 1191–1204, 2005. View at Publisher · View at Google Scholar
  • Alexey Kovalgin, and Jisk Holleman, “Low-Temperature LPCVD of Polycrystalline Ge[sub x]Si[sub 1−x] Films with High Germanium Content,” Journal of The Electrochemical Society, vol. 153, no. 5, pp. G363, 2006. View at Publisher · View at Google Scholar
  • Scott A. Norris, and Stephen J. Watson, “Geometric simulation and surface statistics of coarsening faceted surfaces,” Acta Materialia, vol. 55, no. 19, pp. 6444–6452, 2007. View at Publisher · View at Google Scholar
  • Colin Ophus, Erik Luber, and David Mitlin, “Simulations of faceted polycrystalline thin films: Asymptotic analysis,” Acta Materialia, vol. 57, no. 5, pp. 1327–1336, 2009. View at Publisher · View at Google Scholar
  • Zhang Xin, Song Xiao-Hui, and Zhang Dian-Lin, “Thickness dependence of grain size and surface roughness for dc magnetron sputtered Au films,” Chinese Physics B, vol. 19, no. 8, pp. 086802, 2010. View at Publisher · View at Google Scholar
  • N. Haustrup, and G.M. O’Connor, “The influence of thin film grain size on the size of nanoparticles generated during UV femtosecond laser ablation of thin gold films,” Applied Surface Science, 2012. View at Publisher · View at Google Scholar
  • Sara Fazli, and M. E. Bahrololoom, “Effect of plating time on electrodeposition of thick nanocrystalline permalloy foils,” Transactions of the IMF, vol. 94, no. 2, pp. 92–98, 2016. View at Publisher · View at Google Scholar
  • Hesham Mraied, Thanh Hai Tran, and Wenjun Cai, “Fabrication and deformation of aluminum–manganese microsandwich structure,” Journal of Materials Research, pp. 1–8, 2016. View at Publisher · View at Google Scholar
  • R. Rai, Triloki, B.K. Singh, and N.F.A. Jammal, “Correlation between photoemissive and morphological properties of KBr thin film photocathodes,” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2017. View at Publisher · View at Google Scholar
  • Jing Gong, Neelima Paul, Béla Nagy, Miklós Dolgos, László Bottyán, Peter Böni, and Amitesh Paul, “Nano-metric self-diffusion of Fe: effect of grain size,” RSC Adv., vol. 7, no. 16, pp. 9573–9578, 2017. View at Publisher · View at Google Scholar
  • Cuiqing Jiang, Zhongzhen Wu, Shu Xiao, Zhengyong Ma, Liangliang Liu, Ricky K.Y. Fu, Paul K. Chu, Hai Lin, and Feng Pan, “Structural and optoelectrical properties of Nb-TiO 2 films fabricated by low-energy magnetron sputtering and post-annealing,” Surface and Coatings Technology, 2018. View at Publisher · View at Google Scholar
  • Hossein Alimadadi, Alice Bastos Fanta, Ryutaro Akiyoshi, Takeshi Kasama, Anthony D. Rollett, Marcel A.J. Somers, and Karen Pantleon, “Optimal microstructural design for high thermal stability of pure FCC metals based on studying effect of twin boundaries character and network of grain boundaries,” Materials & Design, 2018. View at Publisher · View at Google Scholar
  • Najla M. Khusayfan, and Hazem K. Khanfar, “Impact of Mg layer thickness on the performance of the Mg/Bi 2 O 3 plasmonic interfaces,” Thin Solid Films, 2018. View at Publisher · View at Google Scholar