Texture, Stress, and Microstructure

Texture, Stress, and Microstructure / 1991 / Article
Special Issue

Ninth International Conference on Textures of Materials

View this Special Issue

Open Access

Volume 14 |Article ID 295381 | https://doi.org/10.1155/TSM.14-18.363

J. A. Szpunar, P. Gangli, S. H. Qiu, I. Shih, E. Batalla, E. G. Zwartz, "Texture in Bi-Sr-Ca-Cu-O Films Prepared by a Paint-on Method", Texture, Stress, and Microstructure, vol. 14, Article ID 295381, 9 pages, 1991. https://doi.org/10.1155/TSM.14-18.363

Texture in Bi-Sr-Ca-Cu-O Films Prepared by a Paint-on Method

Abstract

The texture and structure of polycrystalline films of Bi-Sr-Ca-Cu-O prepared by the paint-on method on alumina substrate has been investigated. A large variety of texture strength has been obtained as a result of various processing of 2:2:1:2, 1:1:1:2, 1:1:2:2 and 2:2:2:3 compounds. The X-ray diffraction analysis and measurements of conductivity have shown the presence of a low Tc phase. Imaging of the magnetic field distribution using the Faraday effect and the critical current measurements demonstrated that the critical current is very low. SEM observation of the microstructure indicate that the possible reason of low critical current density is a weak link between high Tc grains.

Copyright © 1991 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


More related articles

 PDF Download Citation Citation
 Order printed copiesOrder
Views45
Downloads0
Citations