Texture, Stress, and Microstructure

Texture, Stress, and Microstructure / 1991 / Article
Special Issue

Ninth International Conference on Textures of Materials

View this Special Issue

Open Access

Volume 14 |Article ID 503919 | https://doi.org/10.1155/TSM.14-18.187

K. Helming, "Minimal Pole Figure Ranges for Quantitative Texture Analysis", Texture, Stress, and Microstructure, vol. 14, Article ID 503919, 6 pages, 1991. https://doi.org/10.1155/TSM.14-18.187

Minimal Pole Figure Ranges for Quantitative Texture Analysis

Abstract

The use of only a small number of incomplete pole figures for texture determinations is of practical interest for reducing the effort of texture measurement. The determination of minimal pole figure ranges (MPR)is explained and the use of MPR is demonstrated on an example.

Copyright © 1991 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


More related articles

 PDF Download Citation Citation
 Order printed copiesOrder
Views51
Downloads0
Citations