Table of Contents
Textures and Microstructures
Volume 20 (1993), Issue 1-4, Pages 111-124
http://dx.doi.org/10.1155/TSM.20.111

Orientation Correlation in 72.5% Strained OFE Copper

Department of Mechanical Engineering, Yale University, New Haven, CT, USA

Copyright © 1993 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Misorientation Correlation Functions, MCFs, for a 72.5 percent cold-rolled OFE copper plate were calculated for groups of local lattice orientation measurements taken from the rolling-normal and rolling-transverse planes of the sample. The MCFs′ dependence upon sample direction, orientation pair selection and the spatial separation of orientation measurements was explored. A preferred misorientation region in Euler space was identified and found to contain misorientations corresponding to coincides of ∑3, ∑33c, ∑37c and ∑43c. MCFs associated with orientations of interest were found to exhibit unique characteristics.