Texture, Stress, and Microstructure

Texture, Stress, and Microstructure / 1999 / Article
Special Issue

Proceedings of the International Conference: Texture and Properties of Materials

View this Special Issue

Open Access

Volume 32 |Article ID 172536 | https://doi.org/10.1155/TSM.32.355

Hyo-Tae Jeong, Seung-Hyun Hong, Dong Nyung Lee, "Variation of Plastic Strain Ratios of α-Brass Sheet With Tensile Strain", Texture, Stress, and Microstructure, vol. 32, Article ID 172536, 13 pages, 1999. https://doi.org/10.1155/TSM.32.355

Variation of Plastic Strain Ratios of α-Brass Sheet With Tensile Strain

Accepted28 Sep 1997


A study has been made of the changes in the instantaneous plastic strain ratios along various directions of α-brass sheet as a function of tensile strain. The α-brass sheet was fabricated by 88% cold rolling and subsequent annealing at 450℃ for 1.5 h, which lead to complete recrystallization. The recrystallization texture of the α-brass sheet could be approximated by {110} 110. The plastic strain ratio along the rolling direction decreased with increasing tensile strain, whereas those along 45 90 to the rolling direction were almost independent of tensile strain. The results were in agreement with those calculated using the recrystallization textures based on the Taylor-Bishop-Hill full constraints model.

Copyright © 1999 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

More related articles

 PDF Download Citation Citation
 Order printed copiesOrder