Table of Contents
Textures and Microstructures
Volume 32 (1999), Issue 1-4, Pages 101-106

Texture of Cold-Rolled β-Titanium Alloys With Additions of Hydrogen

1Institute of Machines Science, Ural Division, Russian Academy of Sciences, Ekaterinburg, Russia
2Institute of Metals Physics, Ural Division, Russian Academy of Sciences, Ekaterinburg, Russia
3Institute of Engineering Sciences, Russian Academy of Sciences, Pervomaiskaya Street 91, Ekaterinburg 620219, Russia

Accepted 28 September 1997

Copyright © 1999 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


This paper presents a study of texture investigations in a cold-rolled VT-35 titanium alloy with hydrogen concentration varied within 0.04–0.55 wt. %. It is shown that the character of the rolling texture depends on hydrogen contents and is caused by changes in the mechanism of plastic deformation of the alloy. The poorly deformable alloy may be plastified by introducing small additions of hydrogen (0.06–0.12wt.%.). The texture formed in this case has a relatively strong {112}–{100}111 component and a lowintense 111 component.