Table of Contents
Textures and Microstructures
Volume 35, Issue 1, Pages 1-22
http://dx.doi.org/10.1155/TSM.35.1

Influence of Rolling Temperature on the Perfection Degree of Recrystallization Cube Texture in Nickel

Instytite of Metal Physics, Russian Academy of Sciences, 18 Kovalevskaya str., Ekaterinburg 620219, Russia

Received 10 November 2000

Copyright © 2001 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

The effect of the rolling temperature on the deformation texture and the perfection degree of a cube texture in pure-nickel thin tape were investigated. The kinetics of primary recrystallization was studied on samples that had undergone rolling at different temperatures and the temperature of the onset of secondary recrystallization was determined. Regularities of the structure formation in the samples are discussed. It is established that the cube texture with the maximum sharpness is produced in the samples rolled at room temperature.