Table of Contents
Texture, Stress, and Microstructure
Volume 2008, Article ID 360617, 8 pages
http://dx.doi.org/10.1155/2008/360617
Research Article

Mechanical Behaviour and Microstructure of Aluminum-Steel Sheets Joined by FSSW

1Univ Paris-Sud, UMR8182, ICMMO, Laboratoire de Physico-Chimie de l'Etat Solide, Orsay 91405, France
2CNRS, Orsay 91405, France
3Institut de Soudure, Zone d'Activité Aéroport de Metz, 2-4 rue Pîlatre de Rozier, Goin 57420, France

Received 3 July 2007; Accepted 12 December 2007

Academic Editor: Claude Esling

Copyright © 2008 S. Bozzi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. Kobe, “Better Benchmarking,” Automotive Industries, vol. 173, pp. 45–47, 1993. View at Google Scholar
  2. S. Ramasamy, “Drawn arc stud welding: crossing over from steel to aluminium,” Welding Journal, vol. 79, no. 1, pp. 35–39, 2000. View at Google Scholar
  3. T. Watanabe, H. Takayama, and A. Yanagisawa, “Joining of aluminum alloy to steel by friction stir welding,” Journal of Materials Processing Technology, vol. 178, no. 1–3, pp. 342–349, 2006. View at Publisher · View at Google Scholar
  4. C. M. Chen and R. Kovacevic, “Joining of Al 6061 alloy to AISI 1018 steel by combined effects of fusion and solid state welding,” International Journal of Machine Tools & Manufacture, vol. 44, no. 11, pp. 1205–1214, 2004. View at Publisher · View at Google Scholar
  5. G. S. Hanadi, “Friction stir weld evolution of dynamically recrystallized AA 2095 weldments,” Scripta Materialia, vol. 49, no. 11, pp. 1103–1110, 2003. View at Publisher · View at Google Scholar
  6. D. P. Field, T. W. Nelson, Y. Hovanski, and K. V. Jata, “Heterogeneity of crystallographic texture in friction stir welds of aluminum,” Metallurgical and Materials Transactions A, vol. 32, no. 11, pp. 2869–2877, 2001. View at Publisher · View at Google Scholar
  7. D. Mitlin, V. Radmilovic, T. Pan, J. Chen, Z. Feng, and M. L. Santella, “Structure—properties relations in spot friction welded (also known as friction stir spot welded) 6111 aluminum,” Materials Science and Engineering A, vol. 441, no. 1-2, pp. 79–96, 2006. View at Publisher · View at Google Scholar
  8. D.-A. Wang and S. C. Lee, “Microstructures and failure mechanisms of friction stir spot welds of aluminum 6061-T6 sheets,” Journal of Materials Processing Technology, vol. 186, no. 1–3, pp. 291–297, 2007. View at Publisher · View at Google Scholar
  9. K. G. K. Murti and S. Sundaresan, “The formation of intermetallic phases in aluminum-austenitic stainless steel friction welds,” Materials Forum, no. 17, pp. 301–307, 1994. View at Google Scholar
  10. J. Bruckner, “Considering thermal processes for dissimilar metals,” http://www.thefabricator.com/Metallurgy/Metallurgy_Article.cfm?ID=676.
  11. P. Heurtier, M. J. Jones, C. Desrayaud, J. H. Driver, F. Montheillet, and D. Allehaux, “Mechanical and thermal modelling of friction stir welding,” Journal of Materials Processing Technology, vol. 171, no. 3, pp. 348–357, 2006. View at Publisher · View at Google Scholar
  12. S. Gourdet and F. Montheillet, “A model of continuous dynamic recrystallization,” Acta Materialia, vol. 51, no. 9, pp. 2685–2699, 2003. View at Publisher · View at Google Scholar
  13. H. J. McQueen and W. Blum, “Dynamic recovery: sufficient mechanism in the hot deformation of Al (<99.99),” Materials Science and Engineering A, vol. 290, no. 1-2, pp. 95–107, 2000. View at Publisher · View at Google Scholar