Table of Contents
Texture, Stress, and Microstructure
Volume 2009, Article ID 237485, 10 pages
http://dx.doi.org/10.1155/2009/237485
Research Article

Using Individual Spectra Simulation for the Study of Pole Figures Errors

1Frank Laboratory of Neutron Physics, Joint Institute for Nuclear Research, Dubna 141980, Moscow Reg., Russia
2Laboratoire d'Etudes des Textures et Application aux Matériaux (LETAM; CNRS FRE 3143), Ile du Saulcy, University Paul Verlaine-Metz, 57045 Metz, Cedex 01, France

Received 4 August 2008; Revised 20 November 2008; Accepted 26 March 2009

Academic Editor: Paul Houtte

Copyright © 2009 T. A. Lychagina et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. Ullemeyer, P. Spalthoff, J. Heinitz, N. N. Isakov, A. N. Nikitin, and K. Weber, “The SKat texture diffractometer at the pulsed reactor IBR-2 at Dubna: experimental layout and first measurements,” Nuclear Instruments and Methods in Physics Research A, vol. 412, no. 1, pp. 80–88, 1998. View at Publisher · View at Google Scholar
  2. A. Mücklich and P. Klimanek, “Experimental errors in quantitative texture analysis from diffraction pole figures,” Materials Science Forum, vol. 157–162, pp. 275–286, 1994. View at Publisher · View at Google Scholar
  3. V. V. Luzin and D. I. Nikolayev, “On the errors of the experimental pole figures,” Textures and Microstructures, vol. 25, no. 2–4, pp. 121–128, 1996. View at Publisher · View at Google Scholar
  4. V. V. Luzin and D. Nikolayev, “The errors of pole figures measured by neutrons,” in Proceedings of the 11th International Conference on Texture of Materials (ICOTOM 11), pp. 140–145, International Academic Publishers, Xi'an, China, September 1996.
  5. V. V. Luzin, “Optimization of texture measurements. IV. The influence of the grain-size distribution on the quality of texture measurements,” Textures and Microstructures, vol. 31, no. 3, pp. 177–186, 1999. View at Publisher · View at Google Scholar
  6. D. I. Nikolayev, T. A. Lychagina, A. V. Nikishin, and V. V. Yudin, “Study of error distribution in measured pole figures,” Solid State Phenomena, vol. 105, pp. 77–82, 2005. View at Google Scholar
  7. D. I. Nikolayev, T. A. Lychagina, A. V. Nikishin, and V. V. Yudin, “Investigation of measured pole figures errors,” Materials Science Forum, vol. 495–497, pp. 307–312, 2005. View at Publisher · View at Google Scholar
  8. H. J. Bunge, Texture Analysis in Material Science, Butterworths, London , UK, 1982.
  9. S. Matthies, “On the reproducibility of the orientation distribution function of texture samples from pole figures (Ghost phenomena),” Physica Status Solidi B, vol. 92, no. 2, pp. K135–K138, 1979. View at Publisher · View at Google Scholar
  10. S. R. Matthies, G. W. Vinel, and K. Helming, Standard Distributions in Texture Analysis, vol. 1, Akademie-Verlag, Berlin, Germany, 1987.
  11. M. Dahms and H. J. Bunge, “A positivity method for the determination of complete orientation distribution functions,” Textures and Microstructures, vol. 10, no. 1, pp. 21–35, 1988. View at Publisher · View at Google Scholar
  12. M. Dahms and H. J. Bunge, “The iterative series-expansion method for quantitative texture analysis. I. General outline,” Journal of Applied Crystallography, vol. 22, no. 5, pp. 439–447, 1989. View at Publisher · View at Google Scholar
  13. J. Imhof, “Texture analysis by iteration. II. Special cases of the general solution,” Physica Status Solidi B, vol. 120, no. 1, pp. 321–328, 1983. View at Publisher · View at Google Scholar
  14. S. Matthies and G. Vinel, “On the reproduction of the orientation distribution function of texturized samples from reduced pole figures using the conception of a conditional ghost correction,” Physica Status Solidi B, vol. 112, no. 2, pp. K111–K114, 1982. View at Publisher · View at Google Scholar
  15. K. Helming, Texturapproximation durch Modellkomponenten, Cuvillier, Göttingen, Germany, 1996.
  16. T. Eschner, Quantitative Texturanalyse durch Komponentenzerlegung von Beugungs-Polfiguren, dissertation, TU Bergakademie Freiberg, Göttingen, Germany, 1994.
  17. T. Eschner, “Generalized model function for quantitative texture analysis,” in Textures of Geological Materials, Proceedings of a Workshop, DGM Informationsgesellschaft, H. J. Bunge, S. Siegesmund, W. Skrotzki, and K. Weber, Eds., pp. 15–28, Oberursel, Germany, 1994.
  18. T. I. Savyolova, “Distribution function of grains with respect to polycrystal orientations and its. Gaussian approximation,” Zavodskaya Laboratoriya, vol. 50, no. 4, pp. 48–52, 1984 (Russian). View at Google Scholar
  19. K. G. van den Boogaart, R. Hielscher, J. Prestin, and H. Schaeben, “Kernel-based methods for inversion of the Radon transform on SO(3) and their applications to texture analysis,” Journal of Computational and Applied Mathematics, vol. 199, no. 1, pp. 122–140, 2007. View at Publisher · View at Google Scholar · View at MathSciNet
  20. R. Hielscher, The radon transform on the rotation group—inversion and application to texture analysis, Ph.D. thesis, TU Bergakademie Freiberg, Göttingen, Germany, 2007.
  21. P. H. Roberts and D. E. Winch, “On random rotation,” Advances in Applied Probability, vol. 16, no. 12, pp. 638–655, 1984. View at Google Scholar
  22. T. I. Bucharova, Izvestiya, Physics of the Solid Earth, vol. 6, pp. 59–67, 1993 (Russian).
  23. H. Schaeben and D. I. Nikolayev, “The central limit theorem in texture component fit methods,” Acta Applicandae Mathematicae, vol. 53, no. 1, pp. 59–87, 1998. View at Publisher · View at Google Scholar · View at MathSciNet
  24. S. Matthies, H. R. Wenk, and G. Vinel, “Some basic concepts of texture analysis and comparison of three methods to calculate orientation distributions from pole figures,” Journal of Applied Crystallography, vol. 21, no. 4, pp. 285–304, 1988. View at Publisher · View at Google Scholar
  25. L. Lutterotti, S. Matthies, H.-R. Wenk, A. S. Schultz, and J. W. Richardson Jr., “Combined texture and structure analysis of deformed limestone from time-of-flight neutron diffraction spectra,” Journal of Applied Physics, vol. 81, no. 2, pp. 594–600, 1997. View at Publisher · View at Google Scholar
  26. R. B. Von Dreele, “Quantitative texture analysis by Rietveld refinement,” Journal of Applied Crystallography, vol. 30, no. 4, pp. 517–525, 1997. View at Publisher · View at Google Scholar
  27. S. Vogel, C. Hartig, L. Lutteroti, R. B. Von Dreele, H.-R. Wenk, and D. J. Williams, “Texture measurements using the new neutron diffractometer HIPPO and their analysis using the rietveld method,” Advance in X-Ray Analysis, vol. 47, pp. 431–436, 2004. View at Google Scholar
  28. S. Matthies, J. Pehl, H.-R. Wenk, L. Lutterotti, and S. C. Vogel, “Quantitative texture analysis with the HIPPO neutron TOF diffractometer,” Journal of Applied Crystallography, vol. 38, no. 3, pp. 462–475, 2005. View at Publisher · View at Google Scholar
  29. S. Matthies, L. Lutterotti, K. Ullemeyer, and H. R. Wenk, “Texture analysis of quartzite by whole pattern deconvolution,” Textures and Microstructures, vol. 33, no. 1–4, pp. 139–149, 1999. View at Publisher · View at Google Scholar
  30. K. Walther, J. Heinitz, K. Ullemeyer, M. Betzl, and H.-R. Wenk, “Time-of-flight texture analysis of limestone standard: dubna results,” Journal of Applied Crystallography, vol. 28, no. 5, pp. 503–507, 1995. View at Publisher · View at Google Scholar
  31. C. G. Windsor, Pulsed Neutron Scattering, Taylor and Francis, London, UK, 1981.
  32. J. V. Bernier, M. P. Miller, and D. E. Boyce, “A novel optimization-based pole-figure inversion method: comparison with WIMV and maximum entropy methods,” Journal of Applied Crystallography, vol. 39, no. 5, pp. 697–713, 2006. View at Publisher · View at Google Scholar
  33. E. Gill Philip, W. Murray, and M. Wright, Practical Optimization, Academic Press, New York, NY, USA, 1981.
  34. J. A. Nelder and R. Mead, “A simplex method for function minimization,” Computer Journal, vol. 7, no. 4, pp. 308–313, 1965. View at Google Scholar
  35. W. H. Press, S. A. Teukolsky, W. T. Vetterling, and B. P. Flannery, Numerical Recipes in FORTRAN. The art of Scientific Computing, Cambridge University Press, Cambridge, UK, 2nd edition, 1992.
  36. D. Nikolayev and K. Ullemeyer, “Note on preprocessing of diffraction pole-density data,” Journal of Applied Crystallography, vol. 27, no. 4, pp. 517–520, 1994. View at Publisher · View at Google Scholar
  37. G. V. Vinel and S. Matthies, Communication of Zfk (Zenralinstitut fur Kernforschung Rossendorf bei Dresden), no. 391, 1979, Akademie der Wissenschaften der DDR.