Texture, Stress, and Microstructure

Calculation of Yield Surfaces and Determination of Forming Limit Diagrams of Aluminium Alloys

A Microstructure Investigation of the Deformation and Recrystallization of Particle-Containing Aluminium-Silicon Alloys

Development of a {111} Recrystallization Texture Associated With Dynamic Strain Aging During Hot Rolling in the Ferrite Region

Quantitative Texture Analysis of an Anorthosite— Application to Thermal Expansion, Young's Modulus and Thermal Stresses

Texture Evolution During the Biaxial Stretching of FCC Sheet Metals

Orientation Correlation in 72.5% Strained OFE Copper

A New Approach to Describing Three-Dimensional Orientation Distribution Functions in Textured Materials–Part I: Formation of Pole Density Distribution on Model Pole Figures

Orientation Characteristics of the Microstructure of Highly Rolled Pure Copper and Phosphorus-Copper

Texture Analysis of a Zinc Layer on a Steel Substrate Using Neutron Diffraction

Local Pole Figures in the Tem— Measurement and ODF Determination

Final Positivity Correction in the Harmonic Method

On the Development of the Brass-Type Texture in Austenitic Stainless Steel

Numerical Determination of the Variation Width of Feasible ODFs

Automatic EBSP Analysis for Recrystallization Studies

On the Development of the Brass-Type Texture

Texture, Stress, and Microstructure

Table of Contents

Table of Contents: 1993

Calculation of Yield Surfaces and Determination of Forming Limit Diagrams of Aluminium Alloys

A Microstructure Investigation of the Deformation and Recrystallization of Particle-Containing Aluminium-Silicon Alloys

Development of a {111} Recrystallization Texture Associated With Dynamic Strain Aging During Hot Rolling in the Ferrite Region

Quantitative Texture Analysis of an Anorthosite— Application to Thermal Expansion, Young's Modulus and Thermal Stresses

Texture Evolution During the Biaxial Stretching of FCC Sheet Metals

Orientation Correlation in 72.5% Strained OFE Copper

A New Approach to Describing Three-Dimensional Orientation Distribution Functions in Textured Materials–Part I: Formation of Pole Density Distribution on Model Pole Figures

Orientation Characteristics of the Microstructure of Highly Rolled Pure Copper and Phosphorus-Copper

Texture Analysis of a Zinc Layer on a Steel Substrate Using Neutron Diffraction

Local Pole Figures in the Tem— Measurement and ODF Determination

Final Positivity Correction in the Harmonic Method

On the Development of the Brass-Type Texture in Austenitic Stainless Steel

Numerical Determination of the Variation Width of Feasible ODFs

Automatic EBSP Analysis for Recrystallization Studies

On the Development of the Brass-Type Texture