Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2013, Article ID 845916, 7 pages
http://dx.doi.org/10.1155/2013/845916
Research Article

Investigation on the Achievable Flow Length in Injection Moulding of Polymeric Materials with Dynamic Mould Tempering

Friedrich-Alexander-Universität Erlangen-Nürnberg, Institute of Polymer Technology, Am Weichselgarten 9 Tennenlohe, 91054 Erlangen, Germany

Received 24 April 2013; Accepted 2 July 2013

Academic Editors: A. T. Marques and A. I. Martinez

Copyright © 2013 Steve Meister and Dietmar Drummer. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Steve Meister and Dietmar Drummer, “Investigation on the Achievable Flow Length in Injection Moulding of Polymeric Materials with Dynamic Mould Tempering,” The Scientific World Journal, vol. 2013, Article ID 845916, 7 pages, 2013. https://doi.org/10.1155/2013/845916.