Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 171873, 7 pages
http://dx.doi.org/10.1155/2014/171873
Research Article

Generalized Models for Rock Joint Surface Shapes

1College of Civil Engineering, Shaoxing University, Shaoxing 312000, China
2College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China
3Zhejiang Industry Polytechnic College, Shaoxing 312000, China

Received 7 April 2014; Revised 12 June 2014; Accepted 30 June 2014; Published 24 July 2014

Academic Editor: Guangxiong Chen

Copyright © 2014 Shigui Du et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. MŁynarczuk, “Description and classification of rock surfaces by means of laser profilometry and mathematical morphology,” International Journal of Rock Mechanics and Mining Sciences, vol. 47, no. 1, pp. 138–149, 2010. View at Publisher · View at Google Scholar · View at Scopus
  2. P. Cao, H. Q. Jia, T. Y. Liu, C. Pu, and X. Fan, “Fractal analysis of three-dimensional topography characteristics of rock joint surface,” Chinese Journal of Rock Mechanics and Engineering, vol. 30, no. 2, pp. 3839–3843, 2011 (Chinese). View at Google Scholar · View at Scopus
  3. N. Barton, “Review of a new shear-strength criterion for rock joints,” Engineering Geology, vol. 7, no. 4, pp. 287–332, 1973. View at Publisher · View at Google Scholar · View at Scopus
  4. N. Barton and V. Choubey, “The shear strength of rock joints in theory and practice,” Rock Mechanics Felsmechanik Mécanique des Roches, vol. 10, no. 1-2, pp. 1–54, 1977. View at Publisher · View at Google Scholar · View at Scopus
  5. Z. Yang, S. C. Lo, and C. C. Di, “Reassessing the joint roughness coefficient (JRC) estimation using Z2,” Rock Mechanics and Rock Engineering, vol. 34, no. 3, pp. 243–251, 2001. View at Publisher · View at Google Scholar · View at Scopus
  6. A. J. Geertsema, “The shear strength of planar joints in mudstone,” International Journal of Rock Mechanics and Mining Sciences, vol. 39, no. 8, pp. 1045–1049, 2002. View at Publisher · View at Google Scholar · View at Scopus
  7. E. T. Brown, Rock Characterization, Testing and Monitoring—ISRM Suggested Methods, pp. 15-16, Pergamon Press, Oxford, UK, 1981.
  8. G. Z. Sun, Structural Mechanics of Rock Mass, Scientific Press, Beijing, China, 1988 (Chinese).
  9. J. Zhao, “Joint surface matching and shear strength. Part A: joint matching coefficient (JMC),” International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 34, no. 2, pp. 173–178, 1997. View at Publisher · View at Google Scholar · View at Scopus
  10. N. Fardin, O. Stephansson, and L. Jing, “The scale dependence of rock joint surface roughness,” International Journal of Rock Mechanics and Mining Sciences, vol. 38, no. 5, pp. 659–669, 2001. View at Publisher · View at Google Scholar · View at Scopus
  11. S. G. Du, Engineering Properties of Rock Discontinuities, Seismic Press, Beijing, China, 1999, (Chinese).
  12. S. Du, Y. Hu, and X. Hu, “Measurement of joint roughness coefficient by using profilograph and roughness ruler,” Journal of Earth Science, vol. 20, no. 5, pp. 890–896, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. S. G. Du, “The directive statistical evaluation of rock joint roughness coefficient,” Journal of Engineering Geology, vol. 2, pp. 62–71, 1994 (Chinese). View at Google Scholar
  14. S. G. Du and L. B. Fang, “Statistical estimation for rock joint roughness coefficient,” Chinese Journal of Geophysics, vol. 19, pp. 41–44, 1999 (Chinese). View at Google Scholar
  15. S. G. Du, Empirical Estimation for the Shear Strength of Rock Discontinuities, pp. 22-23, Seismic Press, Beijing, China, 2004, (Chinese).