Research Article
The Effects of Forming Parameters on Conical Ring Rolling Process
Table 2
Forming parameters in RCRRCDS process.
| | Parameters | Value |
| | Bottom radius of guide roll (mm) | 40 | | Initial bottom outer radius of ring (mm) | 300 | | Initial bottom inner radius of ring (mm) | 150 | | Initial height of ring (mm) | 86.5 | | Angle between ring and horizontal plane (°) | 60 | | Total feed amount (mm) | 70 | | The peripheral speed of driven roll (mm/s) | 1000 |
|
|
