Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014 (2014), Article ID 256136, 13 pages
http://dx.doi.org/10.1155/2014/256136
Research Article

Effect of Turbulence Intensity on Cross-Injection Film Cooling at a Stepped or Smooth Endwall of a Gas Turbine Vane Passage

Department of Mechanical and Automation Engineering, Da-Yeh University, 168 University Road, Dacun, Changhua 51591, Taiwan

Received 30 August 2013; Accepted 28 November 2013; Published 28 January 2014

Academic Editors: D. Sasaki and C. Zhang

Copyright © 2014 Pey-Shey Wu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. A. Hale, M. W. Plesniak, and S. Ramadhyani, “Film cooling effectiveness for short film cooling holes fed by a narrow plenum,” Journal of Turbomachinery, vol. 122, no. 3, pp. 553–557, 2000. View at Publisher · View at Google Scholar · View at Scopus
  2. L. S. Langston, “Crossflows in a turbine cascade passage,” Journal of engineering for power, vol. 102, no. 4, pp. 866–874, 1980. View at Google Scholar · View at Scopus
  3. R. J. Goldstein and H. P. Chen, “Film cooling on a gas turbine blade near the end wall,” Journal of Engineering for Gas Turbines and Power, vol. 107, no. 1, pp. 117–122, 1985. View at Google Scholar · View at Scopus
  4. O. P. Sharma and T. L. Butler, “Predictions of endwall losses and secondary flows in axial flow turbine cascades,” Journal of Turbomachinery, vol. 109, no. 2, pp. 229–236, 1987. View at Google Scholar · View at Scopus
  5. T. W. Simon and J. D. Piggush, “Turbine endwall aerodynamics and heat transfer,” Journal of Propulsion and Power, vol. 22, no. 2, pp. 301–312, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. R. J. Goldstein and H. P. Chen, “Film cooling on a gas turbine blade near the end wall,” Journal of Engineering for Gas Turbines and Power, vol. 107, no. 1, pp. 117–122, 1985. View at Google Scholar · View at Scopus
  7. R. J. Goldstein and P. H. Chen, “Film cooling of a turbine blade with injection through two rows of holes in the near-endwall region,” Journal of Turbomachinery, vol. 109, no. 4, pp. 588–593, 1987. View at Google Scholar · View at Scopus
  8. H. Du, J. C. Han, and S. V. Ekkad, “Effect of unsteady wake on detailed heat transfer coefficient and film effectiveness distributions for a gas turbine blade,” Journal of Turbomachinery, vol. 120, no. 4, pp. 808–817, 1998. View at Google Scholar · View at Scopus
  9. J. Dittmar, A. Schulz, and S. Wittig, “Assessment of various film-cooling configurations including shaped and compound angle holes based on large-scale experiments,” Journal of Turbomachinery, vol. 125, no. 1, pp. 57–64, 2003. View at Publisher · View at Google Scholar · View at Scopus
  10. H. P. Wang, R. J. Goldstein, and S. J. Olson, “Effect of high free-stream turbulence with large length scale on blade heat/mass transfer,” Journal of Turbomachinery, vol. 121, no. 2, pp. 217–224, 1999. View at Google Scholar · View at Scopus
  11. F. E. Ames, “The influence of large-scale high-intensity turbulence on vane heat transfer,” Journal of Turbomachinery, vol. 119, no. 1, pp. 23–30, 1997. View at Google Scholar · View at Scopus
  12. F. E. Ames, “Aspects of vane film cooling with high turbulence: Part I-Heat transfer,” Journal of Turbomachinery, vol. 120, no. 4, pp. 768–776, 1998. View at Google Scholar · View at Scopus
  13. F. E. Ames, “Aspects of vane film cooling with high turbulence: part II: adiabatic effectiveness,” Journal of Turbomachinery, vol. 120, no. 4, pp. 777–784, 1998. View at Google Scholar · View at Scopus
  14. P. S. Wu and D. S. Zhong, “Flow visualization for the Endwall region of a turbine vane with a forward-facing entrance step,” in Proceedings of the ASME-ATI Conference on Energy, production, distribution, and conservation, pp. 743–752, Milan, Italy, 2006.
  15. P. S. Wu, T. Y. Lin, and Y. M. Lai, “Heat transfer coefficient distribution in the Endwall region of a vane with a finite-step entrance condition,” in Proceedings of The 3rd Pacific Symposium on Flow Visualization and Image Processing, Maui, Hawaii, USA, 2001.
  16. P. S. Wu and T. Y. Lin, “Effects of a forward-facing entrance step on film cooling effectiveness in the Endwall region of a vane,” in Proceedings of the 14th International Symposium on Transport Phenomena, pp. 573–578, Bali, Indonesia, 2003.
  17. J. D. Piggush and T. W. Simon, “Measurements of net change in heat flux as a result of leakage and steps on the contoured endwall of a gas turbine first stage nozzle,” in Proceedings of the ASME-ATI Conference on production, distribution, and conservation, pp. 877–889, Milan, Italy, 2006.
  18. P. S. Wu and S. F. Chang, “Vane Endwall heat transfer for smooth and stepped inlet using streamwise and cross stream film injection,” in Proceedings of the ASME Turbo Expo 2007 Conference: Power for Land, Sea and Air, pp. 661–670, Montreal, Canada, May 2007. View at Scopus
  19. V. Krishnamoorthy, B. R. Pai, and S. P. Sukhatme, “Influence of upstrean flow conditions on the heat transfer to nozzle guide vanes,” Journal of Turbomachinery, vol. 110, no. 3, pp. 412–416, 1988. View at Google Scholar · View at Scopus
  20. R. J. Moffat, “Contributions to the theory of single-sample uncertainty analysis,” Journal of Fluids Engineering, vol. 104, no. 2, pp. 250–260, 1982. View at Google Scholar · View at Scopus