Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 260571, 8 pages
http://dx.doi.org/10.1155/2014/260571
Research Article

Rate Sensitive Continuum Damage Models and Mesh Dependence in Finite Element Analyses

Division of Material and Computational Mechanics, Department of Applied Mechanics, Chalmers University of Technology, 412 96 Gothenburg, Sweden

Received 21 January 2014; Accepted 2 September 2014; Published 3 November 2014

Academic Editor: Alfredo E. Huespe

Copyright © 2014 Goran Ljustina et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. R. Johnson and W. H. Cook, “A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures,” in Proceedings 7th International Symposium on Ballistics, pp. 541–547, 1983.
  2. D. J. Bammann, “Modeling temperature and strain rate dependent large deformation of metals,” Applied Mechanics Reviews, vol. 43, no. 5, pp. S312–S319, 1990. View at Publisher · View at Google Scholar
  3. D. J. Bammann, M. L. Chiesa, and G. C. Johnson, “Modeling large deformation and failure in manufacturing process,” in Theoretical and Applied Mechanics, T. Tatsumi, E. Wannabe, and T. Kambe, Eds., pp. 359–376, 1996. View at Google Scholar
  4. L. Chuzhoy, R. E. DeVor, S. G. Kapoor, and D. J. Bammann, “Microstructure-level modeling of ductile iron machining,” Journal of Manufacturing Science and Engineering, vol. 124, no. 2, pp. 162–169, 2002. View at Publisher · View at Google Scholar · View at Scopus
  5. L. Chuzhoy, R. E. DeVor, S. G. Kapoor, A. J. Beaudoin, and D. J. Bammann, “Machining simulation of ductile iron and its constituents, part 1: estimation of material model parameters and their validation,” Journal of Manufacturing Science and Engineering, vol. 125, no. 2, pp. 181–191, 2003. View at Publisher · View at Google Scholar · View at Scopus
  6. S. L. Soo and D. K. Aspinwall, “Developments in modelling of metal cutting processes,” Proceedings of the Institution of Mechanical Engineers L: Journal of Materials: Design and Applications, vol. 221, no. 4, pp. 197–211, 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. T. D. Marusich and M. Ortiz, “Modelling and simulation of high-speed machining,” International Journal for Numerical Methods in Engineering, vol. 38, no. 21, pp. 3675–3694, 1995. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  8. E. Ceretti, P. Fallböhmer, W. T. Wu, and T. Altan, “Application of 2D FEM to chip formation in orthogonal cutting,” Journal of Materials Processing Technology, vol. 59, no. 1-2, pp. 169–180, 1996. View at Publisher · View at Google Scholar · View at Scopus
  9. T. D. Marusich and M. Ortiz, “Simulation of chip formation in high-speed machining,” in Proceedings of the Joint ASME Applied Mechanics and Materials Summer Meeting, pp. 127–139, June 1995. View at Scopus
  10. T. Obikawa, H. Sasahara, T. Shirakashi, and E. Usui, “Application of computational machining method to discontinuous chip formation,” Transactions of the ASME: Journal of Manufacturing Science and Engineering, vol. 119, no. 4, pp. 667–674, 1997. View at Publisher · View at Google Scholar · View at Scopus
  11. E. Ceretti, M. Lucchi, and T. Altan, “FEM simulation of orthogonal cutting: serrated chip formation,” Journal of Materials Processing Technology, vol. 95, no. 1–3, pp. 17–26, 1999. View at Publisher · View at Google Scholar · View at Scopus
  12. G. Ljustina, R. Larsson, and M. Fagerström, “A FE based machining simulation methodology accounting for cast iron microstructure,” Finite Elements in Analysis and Design, vol. 80, pp. 1–10, 2014. View at Google Scholar
  13. G. Ljustina, M. Fagerström, and R. Larsson, “Hypo- and hyper-inelasticity applied to modeling of compacted graphite iron machining simulations,” European Journal of Mechanics A: Solids, vol. 37, pp. 57–68, 2013. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  14. G. R. Johnson and W. H. Cook, “Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures,” Engineering Fracture Mechanics, vol. 21, no. 1, pp. 31–48, 1985. View at Publisher · View at Google Scholar · View at Scopus
  15. Abaqus Analysis User's Manual, Version 6.10, Providence, RI, USA, 2010.
  16. M. S. Niazi, H. H. Wisselink, and T. Meinders, “Viscoplastic regularization of local damage models: Revisited,” Computational Mechanics, vol. 51, no. 2, pp. 203–216, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. V. Dias da Silva, “A simple model for viscous regularization of elasto-plastic constitutive laws with softening,” Communications in Numerical Methods in Engineering, vol. 20, no. 7, pp. 547–568, 2004. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet · View at Scopus
  18. A. Needleman, “Material rate dependence and mesh sensitivity in localization problems,” Computer Methods in Applied Mechanics and Engineering, vol. 67, no. 1, pp. 69–85, 1988. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  19. R. de Borst, L. J. Sluys, H.-B. Muhlhaus, and J. Pamin, “Fundamental issues in finite element analyses of localization of deformation,” Engineering Computations, vol. 10, no. 2, pp. 99–121, 1993. View at Publisher · View at Google Scholar · View at Scopus
  20. A. C. F. Cocks and M. F. Ashby, “Intergranular fracture during power-law creep under multiaxial stresses,” Metal science, vol. 14, no. 8-9, pp. 395–402, 1980. View at Google Scholar · View at Scopus
  21. J.-H. Song, H. Wang, and T. Belytschko, “A comparative study on finite element methods for dynamic fracture,” Computational Mechanics, vol. 42, no. 2, pp. 239–250, 2008. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  22. N. K. Fukumasu, P. L. Pelegrino, G. Cueva, R. M. Souza, and A. Sinatora, “Numerical analysis of the stresses developed during the sliding of a cylinder over compact graphite iron,” Wear, vol. 259, no. 7-12, pp. 1400–1407, 2005. View at Publisher · View at Google Scholar · View at Scopus
  23. J. Ahlström and B. Karlsson, “Fatigue behaviour of rail steel—a comparison between strain and stress controlled loading,” Wear, vol. 258, no. 7-8, pp. 1187–1193, 2005. View at Publisher · View at Google Scholar · View at Scopus
  24. M. S. J. Hashmi and M. N. Islam, “Stress—strain properties of railway steel at strain rates of up to 105 per second,” in Transactions of the International Conference on Structural Mechanics in Reactor Technology, pp. 397–402, Amsterdam, Holland, 1985.