Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 265816, 8 pages
http://dx.doi.org/10.1155/2014/265816
Research Article

Estimation of the Iron Loss in Deep-Sea Permanent Magnet Motors considering Seawater Compressive Stress

Department of Electrical Engineering, Harbin Institute of Technology, West Dazhi Street, Harbin 150001, China

Received 22 May 2014; Revised 21 July 2014; Accepted 22 July 2014; Published 6 August 2014

Academic Editor: Wenxiang Zhao

Copyright © 2014 Yongxiang Xu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Snary, B. Bhangu, C. M. Bingham, D. A. Stone, and N. Schofield, “Matrix converters for sensorless control of PMSMs and other auxiliaries on deep-sea ROVs,” Electric Power Applications, vol. 152, no. 2, pp. 382–392, 2005. View at Google Scholar
  2. M. E. Inall, D. T. Meldrum, P. G. Provost et al., “HOMER: early results from a novel seabed-resident water column profiler,” in Proceedings of the Oceans—Europe, pp. 1252–1255, June 2005. View at Publisher · View at Google Scholar · View at Scopus
  3. N. Vedachalam, R. Ramesh, S. Ramesh et al., “Challenges in realizing robust systems for deep water submersible ROSUB6000,” in Proceedings of the IEEE International Underwater Technology Symposium (UT '13), pp. 1–10, March 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. M.-F. Hsieh and H.-J. Liao, “Awide speed range sensorless control technique of brushless DC motors for electric propulsors,” Journal of Marine Science and Technology, vol. 18, no. 5, pp. 735–745, 2010. View at Google Scholar · View at Scopus
  5. W. Qi, J. Zou, and J. Li, “Numerical calculation of viscous drag loss of oil-filled BLDC motor for underwater applications,” in Proceedings of the International Conference on Electrical Machines and Systems (ICEMS '10), pp. 1739–1742, October 2010. View at Scopus
  6. T. Schmidt, J. Gelze, H. Lehr et al., “A pressure-tolerant AUV for deep sea applications,” in Proceedings of the OCEANS, pp. 1–4, September 2011. View at Scopus
  7. B. Thomas, “A quantitative assessment of the change in magnetic properties of Co-Fe-V alloy when subjected to flux and stress conditions similar to those encountered in an aircraft generator,” IEEE Transactions on Magnetics, vol. 16, no. 5, pp. 1299–1309, 1980. View at Publisher · View at Google Scholar · View at Scopus
  8. D. Miyagi, K. Miki, M. Nakano, and N. Takahashi, “Influence of compressive stress on magnetic properties of laminated electrical steel sheets,” IEEE Transactions on Magnetics, vol. 46, no. 2, pp. 318–321, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. D. Miyagi, Y. Aoki, M. Nakano, and N. Takahashi, “Effect of compressive stress in thickness direction on iron losses of nonoriented electrical steel sheet,” IEEE Transactions on Magnetics, vol. 46, no. 6, pp. 2040–2043, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Kawabe, T. Nomiyama, A. Shiozaki, M. Mimura, N. Takahashi, and M. Nakano, “Magnetic properties of particular shape specimen of nonoriented electrical steel sheet under compressive stress in thickness direction,” IEEE Transactions on Magnetics, vol. 48, no. 11, pp. 3462–3465, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. F. Ossart, E. Hug, O. Hubert, C. Buvat, and R. Billardon, “Effect of punching on electrical steels: experimental and numerical coupled analysis,” IEEE Transactions on Magnetics, vol. 36, no. 5, pp. 3137–3140, 2000. View at Publisher · View at Google Scholar · View at Scopus
  12. J. Wang, T. Huang, X. Liu, P. Wu, and Z. Guo, “Mechanical properties of recycled concrete in marine environment,” The Scientific World Journal, vol. 2013, Article ID 728357, 8 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Daikoku, M. Nakano, S. Yamaguchi et al., “A high precision motor design method by finite element analysis considering stress distribution in stator core,” in Proceedings of the IEEE International Conference on Electric Machines and Drives, pp. 366–372, May 2005. View at Scopus
  14. N. Takahashi, H. Morimoto, Y. Yunoki, and D. Miyagi, “Effect of shrink fitting and cutting on iron loss of permanent magnet motor,” Journal of Magnetism and Magnetic Materials, vol. 320, no. 20, pp. e925–e928, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. K. Yamazaki and Y. Kato, “Iron loss analysis of interior permanent magnet synchronous motors by considering mechanical stress and deformation of stators and rotors,” IEEE Transactions on Magnetics, vol. 50, no. 2, pp. 909–912, 2014. View at Google Scholar
  16. D. Miyagi, N. Maeda, Y. Ozeki, K. Miki, and N. Takahashi, “Estimation of iron loss in motor core with shrink fitting using FEM analysis,” IEEE Transactions on Magnetics, vol. 45, no. 3, pp. 1704–1707, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. N. Takahashi and D. Miyagi, “Effect of stress on iron loss of motor core,” in Proceedings of the IEEE International Electric Machines and Drives Conference (IEMDC '11), pp. 469–474, May 2011. View at Publisher · View at Google Scholar · View at Scopus